From owner-freebsd-current Tue Feb 22 4:30:33 2000 Delivered-To: freebsd-current@freebsd.org Received: from picalon.gun.de (picalon.gun.de [192.109.159.1]) by hub.freebsd.org (Postfix) with ESMTP id 6D7B637B55A for ; Tue, 22 Feb 2000 04:30:20 -0800 (PST) (envelope-from andreas@klemm.gtn.com) Received: (from uucp@localhost) by picalon.gun.de (8.9.3/8.9.3) id NAA24083; Tue, 22 Feb 2000 13:30:08 +0100 (MET) >Received: (from andreas@localhost) by klemm.gtn.com (8.9.3/8.9.3) id NAA01214; Tue, 22 Feb 2000 13:14:29 +0100 (CET) (envelope-from andreas) Date: Tue, 22 Feb 2000 13:14:29 +0100 From: Andreas Klemm To: Soren Schmidt Cc: current@FreeBSD.ORG Subject: Re: timeout problems HighPoint HPT366 ATA66 controller && 40 GB Diamond Max Plus Message-ID: <20000222131429.A870@titan.klemm.gtn.com> References: <20000221235518.A998@titan.klemm.gtn.com> <200002220832.JAA00330@freebsd.dk> Mime-Version: 1.0 X-Mailer: Mutt 1.0.1i In-Reply-To: <200002220832.JAA00330@freebsd.dk>; from sos@freebsd.dk on Tue, Feb 22, 2000 at 09:32:43AM +0100 X-Operating-System: FreeBSD 4.0-CURRENT SMP X-Disclaimer: A free society is one where it is safe to be unpopular Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Soren, > make that: > device ata > device atadisk > options ATA_STATIC_ID did that: after kernel re-compilation I created a new disklabel on the device I used the whole disk /dev/ad4c /data ufs rw 1 2 just for testing purposes. Newfs'ing and mounting the filesystem went fine. I enabled softupdates prior mounting. But when I tried fire up bonnie -s 100 I soon get after nearly writing the 100 MB characterwise... ad4: READ command timeout - resetting ata2: resetting devices And the whole system hangs -> reset Behind dmesg of a verbose boot my new kernel config as reference Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Tue Feb 22 12:11:23 CET 2000 root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN Calibrating clock(s) ... TSC clock: 199426380 Hz, i8254 clock: 1193149 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium Pro (199.43-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping = 9 Features=0xfbff real memory = 159383552 (155648K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00345000 - 0x097f5fff, 155914240 bytes (38065 pages) avail memory = 150921216 (147384K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 IOAPIC #0 intpin 16 -> irq 15 IOAPIC #0 intpin 17 -> irq 11 IOAPIC #0 intpin 18 -> irq 10 IOAPIC #0 intpin 19 -> irq 14 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 bios32: Found BIOS32 Service Directory header at 0xc00fac30 bios32: Entry = 0xfb0b0 (c00fb0b0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb0e0 pnpbios: Found PnP BIOS data at 0xc00fbc30 pnpbios: Entry = f0000:bc58 Rev = 1.0 Other BIOS signatures found: ACPI: 00000000 Preloaded elf kernel "kernel" at 0xc0329000. ccd0-3: Concatenated disk drivers Pentium Pro MTRR support enabled SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086) npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086) pcib0: on motherboard found-> vendor=0x8086, dev=0x1237, revid=0x02 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7000, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7010, revid=0x00 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x102b, dev=0x0519, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=15 map[10]: type 1, range 32, base e0000000, size 14 map[14]: type 1, range 32, base e1000000, size 23 found-> vendor=0x10b7, dev=0x9001, revid=0x00 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=14 map[10]: type 1, range 32, base 00009400, size 6 found-> vendor=0x1102, dev=0x0002, revid=0x04 class=04-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 00009800, size 5 found-> vendor=0x1102, dev=0x7002, revid=0x01 class=09-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 00009c00, size 3 found-> vendor=0x9004, dev=0x8178, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000a000, size 8 map[14]: type 1, range 32, base e2000000, size 12 found-> vendor=0x1103, dev=0x0004, revid=0x01 class=01-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=15 map[10]: type 1, range 32, base 0000a400, size 3 map[14]: type 1, range 32, base 0000a800, size 2 map[20]: type 1, range 32, base 0000ac00, size 8 found-> vendor=0x1103, dev=0x0004, revid=0x01 class=01-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=15 map[10]: type 1, range 32, base 0000b000, size 3 map[14]: type 1, range 32, base 0000b400, size 2 map[20]: type 1, range 32, base 0000b800, size 8 pci0: on pcib0 isab0: at device 7.0 on pci0 I/O Recovery Timing: 8-bit 1 clocks, 16-bit 1 clocks Extended BIOS: disabled Lower BIOS: disabled Coprocessor IRQ13: enabled Mouse IRQ12: enabled Interrupt Routing: A: IRQ15, B: IRQ11, C: IRQ10, D: IRQ14 MB0: , MB1: isa0: on isab0 atapci0: at device 7.1 on pci0 atapci0: Busmastering DMA not enabled ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x0000 ata0: mask=00 status0=ff status1=ff ata0: probe allocation failed ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x0001 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed pci0: Matrox MGA Millennium 2064W graphics accelerator (vendor=0x102b, dev=0x0519) at 10.0 irq 15 xl0: <3Com 3c900-COMBO Etherlink XL> port 0x9400-0x943f irq 14 at device 11.0 on pci0 xl0: Ethernet address: 00:60:97:aa:3a:db xl0: media options word: e138 xl0: found 10baseT xl0: found AUI xl0: found BNC xl0: selecting 10baseT transceiver, half duplex bpf: xl0 attached pci0: unknown card (vendor=0x1102, dev=0x0002) at 12.0 irq 10 pci0: unknown card (vendor=0x1102, dev=0x7002) at 12.1 ahc0: port 0xa000-0xa0ff mem 0xe2000000-0xe2000fff irq 11 at device 13.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: internal 50 cable is present, internal 68 cable not present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: Low byte termination Enabled ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs ahc0: Downloading Sequencer Program... 413 instructions downloaded atapci1: port 0xac00-0xacff,0xa800-0xa803,0xa400-0xa407 irq 15 at device 14.0 on pci0 ata2: iobase=0xa400 altiobase=0xa800 bmaddr=0xac00 ata2: mask=03 status0=50 status1=00 ata2: mask=03 status0=50 status1=00 ata2: devices = 0x1 ata2: at 0xa400 on atapci1 atapci2: port 0xb800-0xb8ff,0xb400-0xb403,0xb000-0xb007 irq 15 at device 14.1 on pci0 ata3: iobase=0xb000 altiobase=0xb400 bmaddr=0xb800 ata3: mask=03 status0=20 status1=30 ata3: mask=03 status0=20 status1=30 ata3: devices = 0x0 ata3: probe allocation failed Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60-0x6f on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status b1 03 c8 psm: status b1 03 c8 psm: status b1 03 c8 psm: status 00 00 3c psm: data 08 00 00 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff fb: new array size 4 sc0: on isa0 sc0: VGA <4 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port found at 0x378 ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port plip0: on ppbus0 bpf: lp0 attached ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 5 on isa0 ed0: address 00:00:c0:5a:98:2a, type WD8013EPC (16 bit) bpf: ed0 attached isa_probe_children: probing PnP devices SMP: enabled INTs: 1, 3, 4, 5, 6, 7, 11, 12, 14, 15, apic_imen: 0x00ff2705 BIOS Geometries: 0:0106fe3f 0..262=263 cylinders, 0..254=255 heads, 1..63=63 sectors 1:0106fe3f 0..262=263 cylinders, 0..254=255 heads, 1..63=63 sectors 2:0106fe3f 0..262=263 cylinders, 0..254=255 heads, 1..63=63 sectors 3:0106fe3f 0..262=263 cylinders, 0..254=255 heads, 1..63=63 sectors 4:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default DUMMYNET initialized (000106) bpf: lo0 attached Linux-ELF exec handler installed SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff ata2-master: success setting up UDMA4 mode on HPT366 chip ad4: ATA-5 disk at ata2 as master ad4: 39082MB (80041248 sectors), 79406 cyls, 16 heads, 63 S/T, 512 B/S ad4: 16 secs/int, 1 depth queue, UDMA66 ad4: piomode=4 dmamode=2 udmamode=4 cblid=1 Creating DISK ad4 Creating DISK wd4 Waiting 8 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. ahc0: target 6 synchronous at 10.0MHz, offset = 0xf ahc0: target 2 synchronous at 10.0MHz, offset = 0xf ahc0: target 0 synchronous at 10.0MHz, offset = 0xf ahc0: target 1 synchronous at 10.0MHz, offset = 0xf ahc0: target 3 synchronous at 10.0MHz, offset = 0xf Creating DISK da0 Creating DISK da1 Creating DISK da2 Creating DISK da3 Creating DISK cd0 pass0 at ahc0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number 5U6G6557 pass0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-2 device pass1: Serial Number 5U2N3906 pass1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass2 at ahc0 bus 0 target 2 lun 0 pass2: Fixed Direct Access SCSI-2 device pass2: Serial Number 5U312691 pass2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass3 at ahc0 bus 0 target 3 lun 0 pass3: Fixed Direct Access SCSI-2 device pass3: Serial Number 5U323663 pass3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled pass4 at ahc0 bus 0 target 6 lun 0 pass4: Removable CD-ROM SCSI-2 device pass4: Serial Number 8704381B pass4: 10.000MB/s transfers (10.000MHz, offset 15) Mounting root from ufs:/dev/da0s2a (cd0:ahc0:0:6:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ahc0:0:6:0): NOT READY asc:3a,0 (cd0:ahc0:0:6:0): Medium not present cd0 at ahc0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: Serial Number 8704381B cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number 5U2N3906 da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da3 at ahc0 bus 0 target 3 lun 0 da3: Fixed Direct Access SCSI-2 device da3: Serial Number 5U323663 da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da3: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number 5U6G6557 da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da2 at ahc0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: Serial Number 5U312691 da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da0s1: type 0xb, start 63, end = 1638629, size 1638567 : OK da0s2: type 0xa5, start 1638630, end = 4225094, size 2586465 : OK start_init: trying /sbin/init da1s1: type 0xa5, start 32, end = 4225023, size 4224992 : OK da2s1: type 0xa5, start 32, end = 4225023, size 4224992 : OK da3s1: type 0xa5, start 32, end = 4225023, size 4224992 : OK WARNING: R/W mount of /obj denied. Filesystem is not clean - run fsck WARNING: R/W mount of /news denied. Filesystem is not clean - run fsck WARNING: R/W mount of /proxy denied. Filesystem is not clean - run fsck WARNING: R/W mount of /home denied. Filesystem is not clean - run fsck splash: image decoder found: daemon_saver xl0: promiscuous mode enabled xl0: promiscuous mode disabled (da0:ahc0:0:0:0): tagged openings now 32 (da1:ahc0:0:1:0): tagged openings now 32 (da3:ahc0:0:3:0): tagged openings now 32 (da2:ahc0:0:2:0): tagged openings now 32 machine i386 cpu I686_CPU ident TITAN maxusers 100 options INCLUDE_CONFIG_FILE #Include this file in kernel options INET #Internet communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options SOFTUPDATES #Softupdates options MD5 options NSWAPDEV=4 options COMPAT_LINUX options SHOW_BUSYBUFS options P1003_1B options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L options USER_LDT options MSGBUF_SIZE=40960 options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O options PQ_HUGECACHE # color for 1024k/16k cache device isa0 device pci0 device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device ahc0 # AHA2940 and onboard AIC7xxx devices options SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device options AHC_ALLOW_MEMIO device scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI access) device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? pseudo-device splash device sc0 at isa? options MAXCONS=4 # number of virtual consoles options SC_HISTORY_SIZE=200 # number of history buffer lines device npx0 at nexus? port IO_NPX irq 13 device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device ppc0 at isa? port? irq 7 device ppbus0 # Parallel port bus (required) device lpt0 at ppbus? # Printer device plip0 at ppbus? # TCP/IP over parallel device ppi0 at ppbus? # Parallel port interface device options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about dropped packets options IPFIREWALL_FORWARD #enable xparent proxy support options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPDIVERT #divert sockets options ICMP_BANDLIM options DUMMYNET device miibus0 # MII bus support device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') device ed0 at isa? port 0x280 irq 5 iomem 0xd8000 pseudo-device loop # Network loopback pseudo-device ether # Ethernet support options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpfilter) pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's pseudo-device bpf #Berkeley packet filter pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device ccd 4 #Concatenated disk driver device smbus0 device iicbus0 device iicbb0 device intpm0 device smb0 at smbus? device ata device atadisk # ATA disk drives options ATA_STATIC_ID #Static device numbering -- Andreas Klemm http://www.FreeBSD.ORG/~andreas http://www.freebsd.org/~fsmp/SMP/SMP.html powered by Symmetric MultiProcessor FreeBSD Get new songs from our band: http://www.freebsd.org/~andreas/64bits/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message