From owner-freebsd-bugs  Thu Sep  6  1: 0:23 2001
Delivered-To: freebsd-bugs@hub.freebsd.org
Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21])
	by hub.freebsd.org (Postfix) with ESMTP id 9FB6637B405
	for <freebsd-bugs@hub.freebsd.org>; Thu,  6 Sep 2001 01:00:01 -0700 (PDT)
Received: (from gnats@localhost)
	by freefall.freebsd.org (8.11.4/8.11.4) id f86801316663;
	Thu, 6 Sep 2001 01:00:01 -0700 (PDT)
	(envelope-from gnats)
Received: from freefall.freebsd.org (freefall.freebsd.org [216.136.204.21])
	by hub.freebsd.org (Postfix) with ESMTP id 1036337B401
	for <freebsd-gnats-submit@FreeBSD.org>; Thu,  6 Sep 2001 00:50:16 -0700 (PDT)
Received: (from nobody@localhost)
	by freefall.freebsd.org (8.11.4/8.11.4) id f867oGk15690;
	Thu, 6 Sep 2001 00:50:16 -0700 (PDT)
	(envelope-from nobody)
Message-Id: <200109060750.f867oGk15690@freefall.freebsd.org>
Date: Thu, 6 Sep 2001 00:50:16 -0700 (PDT)
From: Cristian Angelini <angelini@bmm.it>
To: freebsd-gnats-submit@FreeBSD.org
X-Send-Pr-Version: www-1.0
Subject: misc/30373: Logitech IFeel Optical USB mouse does not attach
Sender: owner-freebsd-bugs@FreeBSD.ORG
Precedence: bulk
List-ID: <freebsd-bugs.FreeBSD.ORG>
List-Archive: <http://docs.freebsd.org/mail/> (Web Archive)
List-Help: <mailto:majordomo@FreeBSD.ORG?subject=help> (List Instructions)
List-Subscribe: <mailto:majordomo@FreeBSD.ORG?subject=subscribe%20freebsd-bugs>
List-Unsubscribe: <mailto:majordomo@FreeBSD.ORG?subject=unsubscribe%20freebsd-bugs>
X-Loop: FreeBSD.org


>Number:         30373
>Category:       misc
>Synopsis:       Logitech IFeel Optical USB mouse does not attach
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Sep 06 01:00:01 PDT 2001
>Closed-Date:
>Last-Modified:
>Originator:     Cristian Angelini
>Release:        4.3-STABLE
>Organization:
>Environment:
FreeBSD  4.3-STABLE FreeBSD 4.3-STABLE #7: Thu Sep  6 09:14:55 CEST 2001     root@:/usr/obj/usr/src/sys/CHRIS  i386
(CVSUPped end of june)

>Description:
When attaching this mouse on any usb port there is a long wait, followed by various error messages. Mouse will light as if working, but actually it doesn't. After that, attaching and detaching units on the hub has no effect at all, seems all the usb is locked.

Hardware in use: MB K7VZA, BIOS version 3.2b with Ahtlon 1.2G, following is the dmesg section; mouse has been attached after the boot phase to show the correct attaching of other various usb devices.

---------------BEGIN DMESG
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #7: Thu Sep  6 09:14:55 CEST 2001
    root@:/usr/obj/usr/src/sys/CHRIS
Calibrating clock(s) ... TSC clock: 1202348031 Hz, i8254 clock: 1193403 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: AMD Athlon(tm) Processor (1202.13-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
Data TLB: 24 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 536805376 (524224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x003b0000 - 0x1ffe7fff, 532905984 bytes (130104 pages)
avail memory = 519122944 (506956K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00faf00
bios32: Entry = 0xfb370 (c00fb370)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xb3a0
pnpbios: Found PnP BIOS data at 0xc00fbec0
pnpbios: Entry = f0000:bef0  Rev = 1.0
Other BIOS signatures found:
ACPI: 000f7ef0
Preloaded elf kernel "kernel" at 0xc038a000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=03051106)
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=03051106)
pcib0: <Host to PCI bridge> on motherboard
found->	vendor=0x1106, dev=0x0305, revid=0x03
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base d8000000, size 26
found->	vendor=0x1106, dev=0x8305, revid=0x00
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x1106, dev=0x0686, revid=0x40
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0x0571, revid=0x06
	class=01-01-8a, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 0000d000, size  4
found->	vendor=0x1106, dev=0x3038, revid=0x16
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=12
	map[20]: type 1, range 32, base 0000d400, size  5
found->	vendor=0x1106, dev=0x3057, revid=0x40
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
found->	vendor=0x1106, dev=0x3058, revid=0x50
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=c, irq=5
	map[10]: type 1, range 32, base 0000dc00, size  8
	map[14]: type 1, range 32, base 0000e000, size  2
	map[18]: type 1, range 32, base 0000e400, size  2
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 0000ec00, size  8
	map[14]: type 1, range 32, base df000000, size  8
found->	vendor=0x11de, dev=0x6057, revid=0x02
	class=04-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=12
	map[10]: type 1, range 32, base df001000, size 12
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
found->	vendor=0x1002, dev=0x5144, revid=0x00
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=10
	map[10]: type 1, range 32, base d0000000, size 27
	map[14]: type 1, range 32, base 0000c000, size  8
	map[18]: type 1, range 32, base dd000000, size 19
pci1: <PCI bus> on pcib2
pci1: <ATI model 5144 graphics accelerator> (vendor=0x1002, dev=0x5144) at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000
ata0: mask=03 status0=50 status1=50
ata0: mask=03 ostat0=50 ostat2=50
ata0-slave: ATAPI probe a=00 b=00
ata0-master: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=50
ata0-master: ATA probe a=01 b=a5
ata0-slave: ATA probe a=01 b=a5
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008
ata1: mask=03 status0=50 status1=50
ata1: mask=03 ostat0=50 ostat2=50
ata1-master: ATAPI probe a=14 b=eb
ata1-slave: ATAPI probe a=14 b=eb
ata1: mask=03 status0=10 status1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 7.2 on pci0
uhci_run: setting run=0
uhci_run: done cmd=0x0 sts=0x20
uhci_run: setting run=1
uhci_run: done cmd=0x81 sts=0x0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci_device_request: not done, ii=0xc1049800
uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub1: 4 ports with 4 removable, self powered
uhci_device_intr_transfer: not done, ii=0xc10497a0
uhci_device_request: not done, ii=0xc1049780
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 3, iclass 7/1
uhci_device_request: not done, ii=0xc1049720
ugen0: ELSA AG ELSA MicroLink ISDN USB Connect , rev 1.00/0.01, addr 4
pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 5 at device 7.5 on pci0
pcm0: ac97 codec id 0x49434511
pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Reserved 27
pcm0: ac97 primary codec extended features variable rate PCM, AMAP
pcm: setmap 1000, 4000; 0xd29c1000 -> 1000
pcm: setmap 5000, 4000; 0xd29c5000 -> 5000
rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xdf000000-0xdf0000ff irq 11 at device 10.0 on pci0
rl0: Ethernet address: 00:30:4f:0b:68:72
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
pci0: <unknown card> (vendor=0x11de, dev=0x6057) at 12.0 irq 12
pci_open(1):	mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=03051106)
pci-: pci1 exists, using next available unit number
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0067
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
ppc0: parallel port found at 0x3bc
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68d040, tty 630022, net 670822
bpf: sl0 attached
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
ata0-master: success setting UDMA5 on VIA chip
Creating DISK ad0
ad0: <QUANTUM FIREBALLP AS40.0/A1Y.1500> ATA-5 disk at ata0-master
ad0: 38172MB (78177792 sectors), 77557 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ad0: 38172MB <QUANTUM FIREBALLP AS40.0> [77557/16/63] at ata0-master UDMA100
ata0-slave: success setting UDMA5 on VIA chip
Creating DISK ad1
ad1: <QUANTUM FIREBALLP AS40.0/A1Y.1500> ATA-5 disk at ata0-slave
ad1: 38172MB (78177792 sectors), 77557 cyls, 16 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA100
ad1: piomode=4 dmamode=2 udmamode=5 cblid=1
ad1: 38172MB <QUANTUM FIREBALLP AS40.0> [77557/16/63] at ata0-slave UDMA100
ata1-master: piomode=4 dmamode=2 udmamode=4 dmaflag=1
ata1-master: DMA limited to UDMA33, non-ATA66 compliant cable
ata1-master: success setting UDMA2 on VIA chip
acd0: <ASUS DVD-ROM E612/1.2B> DVD-ROM drive at ata1 as master
acd0: read 2406KB/s (6875KB/s), 640KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked
ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-slave: success setting UDMA2 on VIA chip
acd1: <Hewlett-Packard CD-Writer Plus 9500/1.0e> CD-RW drive at ata1 as slave
acd1: read 5512KB/s (5512KB/s) write 2067KB/s (2067KB/s), 4096KB buffer, UDMA33
acd1: Reads: CD-R, CD-RW, CD-DA stream, packet
acd1: Writes: CD-R, CD-RW, test write
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray
acd1: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xc, start 63, end = 39086144, size 39086082 : OK
ad0s2: type 0xa5, start 39086145, end = 78172289, size 39086145 : OK
start_init: trying /sbin/init
uhci_idone: error, addr=5, endpt=0x00, status 0x500000<BABBLE,STALLED>
uhci_timeout: ii=0xc14045e0
uhci_device_request: not done, ii=0xc14045e0
uhci_timeout: ii=0xc14045e0
ums0: Logitech, Inc. product 0xc030, rev 1.00/1.01, addr 5, iclass 3/1
uhci_device_request: not done, ii=0xc14045e0
uhci_timeout: ii=0xc14045e0
device_probe_and_attach: ums0 attach returned 6
uhci_device_request: not done, ii=0xc14045e0
uhci_timeout: ii=0xc14045e0
uhci_device_request: not done, ii=0xc14045e0
uhci_timeout: ii=0xc14045e0
ugen1: Logitech, Inc. product 0xc030, rev 1.00/1.01, addr 5
uhci_device_request: not done, ii=0xc14045e0
uhci_timeout: ii=0xc14045e0
ugen1: setting configuration index 0 failed
device_probe_and_attach: ugen1 attach returned 6
uhci_device_request: not done, ii=0xc14045e0
uhci_timeout: ii=0xc14045e0
uhci_device_request: not done, ii=0xc14045e0
uhci_timeout: ii=0xc14045e0
uhci_timeout: ii=0xc1049800
uhci_device_request: not done, ii=0xc1049800
uhci_timeout: ii=0xc1049800
uhci_device_request: not done, ii=0xc1049800
uhci_timeout: ii=0xc1049800
uhci_device_request: not done, ii=0xc1049800
uhci_timeout: ii=0xc1049800
uhci_device_request: not done, ii=0xc1049800
uhci_timeout: ii=0xc1049800
uhci_device_request: not done, ii=0xc1049800
uhci_timeout: ii=0xc1049800
uhci_device_request: not done, ii=0xc1049800
uhci_timeout: ii=0xc1049800
---------------END DMESG

This is the kernel configuration:

---------------BEGIN KERNEL
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.26 2001/05/30 03:21:49 mjacob Exp $

machine		i386
cpu		I586_CPU
cpu		I686_CPU
ident		CHRIS	
maxusers	32

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0    at nexus? disable flags 0x20 # Advanced Power Management

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		rl		# RealTek 8129/8139

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif	4	# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
#device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		uscanner	# Scanners
# USB Ethernet, requires mii
#device		aue		# ADMtek USB ethernet
#device		cue		# CATC USB ethernet
#device		kue		# Kawasaki LSI USB ethernet

options		UHCI_DEBUG
options		USB_DEBUG
options		UMS_DEBUG
options 	DIAGNOSTIC

device 		pcm

---------------END KERNEL
>How-To-Repeat:
Always repeatable on my system. Booting with mouse attached or attaching after boot does not change behavior. Removing other USB devices or changing topology does not change behavior.
>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted:

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message