Date: Wed, 10 Jun 2009 13:02:02 -0400 From: John Baldwin <jhb@freebsd.org> To: "M. Warner Losh" <imp@bsdimp.com> Cc: freebsd-arch@freebsd.org Subject: Re: devclass_find_free_unit Message-ID: <200906101302.03211.jhb@freebsd.org> In-Reply-To: <20090610.102144.324381338.imp@bsdimp.com> References: <20090609.174249.-1435625969.imp@bsdimp.com> <200906100822.15516.jhb@freebsd.org> <20090610.102144.324381338.imp@bsdimp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 10 June 2009 12:21:44 pm M. Warner Losh wrote:
> In message: <200906100822.15516.jhb@freebsd.org>
> John Baldwin <jhb@freebsd.org> writes:
> : On Tuesday 09 June 2009 7:42:49 pm M. Warner Losh wrote:
> : > What purpose does devclass_find_free_unit serve? I think it can safely
be
> : > eliminated from the tree. The current design is racy.
> : >
> : > Comments?
> : >
> : > It is currently used:
> : >
> : > ./arm/xscale/ixp425/.svn/text-base/avila_ata.c.svn-base:
> : device_add_child(dev, "ata", devclass_find_free_unit(ata_devclass, 0));
> : > ./arm/xscale/ixp425/avila_ata.c: device_add_child(dev, "ata",
> : devclass_find_free_unit(ata_devclass, 0));
> : > ./arm/at91/.svn/text-base/at91_cfata.c.svn-base:
> : device_add_child(dev, "ata", devclass_find_free_unit(ata_devclass, 0));
> : > ./arm/at91/at91_cfata.c: device_add_child(dev, "ata",
> : devclass_find_free_unit(ata_devclass, 0));
> : > ./powerpc/psim/.svn/text-base/ata_iobus.c.svn-base:
> : devclass_find_free_unit(ata_devclass, 0));
> : >
> : > # All the above can be replaced with a simple '-1'.
> : >
> : > ata/ata-pci.c: unit : devclass_find_free_unit(ata_devclass, 2));
> : > ata/ata-usb.c: devclass_find_free_unit(ata_devclass, 2)))
==
> : NULL) {
> : >
> : > These can likely be replaced by '2', but that may result in a warning
> : > message being printed that likely can be eliminated...
> :
> : ata does this so it can reserve ata0 and ata1 for the "legacy" ATA
channels on
> : legacy ATA PCI adapters. That is, if you have both SATA controllers and a
> : PATA controller, this allows the two PATA channels to always be ata0 and
ata1
> : and the PATA drivers to always be ad0 - ad3. You could perhaps implement
> : this in 8.x now by a really horrendous hack of having ISA hints for ata0
and
> : ata1 and letting bus_hint_device_unit() in the atapci driver claim those
> : hints for the channels on PATA controllers.
>
> I think it already does something akin to this:
>
> /* attach all channels on this controller */
> for (unit = 0; unit < ctlr->channels; unit++) {
> if ((ctlr->ichannels & (1 << unit)) == 0)
> continue;
> child = device_add_child(dev, "ata",
> ((unit == 0 || unit == 1) && ctlr->legacy) ?
> unit : devclass_find_free_unit(ata_devclass, 2));
> if (child == NULL)
> device_printf(dev, "failed to add ata child device\n");
> else
> device_set_ivars(child, (void *)(intptr_t)unit);
> }
>
> Why not just replace devclass_find_free_unit with '2'?
Because if you add 'ata2', and 'ata2' exists it will fail, it won't rename it
to ata3. And that is what ata is trying to do. It basically wants
to "reserve" ata0 and ata1 and then use device_add_child(..., -1). However,
device_add_child(..., -1) will not "reserve" ata0 and ata1.
> All the other users in the tree aer bogus and should be replaced by
> -1. Well, I'm not 100% sure about the ata-usb.c patch, since that
> would also be necessary to avoid collision. And the above code really
> only applies to x86-based machine, right? There's no need to do that
> for non-intel boxes. Or is the assumption on those boxes the
> controller would never be in legacy.
Any machine that can have a PCI PATA controller or a PCI SATA controller
operating in "legacy" mode. That said, the compatability bits probably don't
matter as much on non-x86 as there are not older releases to be compatible
with (or the impact would be less severe if we renumber people's drives at
least).
--
John Baldwin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200906101302.03211.jhb>