Date: Thu, 13 Aug 2020 19:06:15 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 248630] sesutil does not report all drives in an MSA60, locate LED is off by +1 Message-ID: <bug-248630-227-JTmNXBdfCo@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-248630-227@https.bugs.freebsd.org/bugzilla/> References: <bug-248630-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D248630 --- Comment #2 from Mike Biesele <mike@biesele.com> --- library ~ # sg_ses -p 1 /dev/ses0 HP MSA60 2.18 Configuration diagnostic page: number of secondary subenclosures: 0 generation code: 0x0 enclosure descriptor list Subenclosure identifier: 0 [primary] relative ES process id: 1, number of ES processes: 1 number of type descriptor headers: 10 enclosure logical identifier (hex): 5001438001571280 enclosure vendor: HP product: MSA60 rev: 2.18 vendor-specific data: 48 50 20 4d 53 41 20 53 74 6f 72 61 67 65 20 45 HP MSA Storage E 6e 63 6c 6f 73 75 72 65 20 20 20 20 20 20 20 20 nclosure 20 00 00 00 ... type descriptor header and text list Element type: Array device slot, subenclosure id: 0 number of possible elements: 12 text: Bay Element type: Power supply, subenclosure id: 0 number of possible elements: 2 text: Power Supply Element type: Cooling, subenclosure id: 0 number of possible elements: 2 text: Fans Element type: Cooling, subenclosure id: 0 number of possible elements: 2 text: Fans Element type: Temperature sensor, subenclosure id: 0 number of possible elements: 4 text: Temperature Sensor Element type: Enclosure services controller electronics, subenclosure i= d: 0 number of possible elements: 1 text: Enclosure Service Controller Element type: Enclosure, subenclosure id: 0 number of possible elements: 1 text: Enclosure Element type: SAS expander, subenclosure id: 0 number of possible elements: 1 text: SAS Expander Element type: SAS connector, subenclosure id: 0 number of possible elements: 36 text: SAS Expander Phy Element type: vendor specific [0x80], subenclosure id: 0 number of possible elements: 1 text: HP 7-Segment Display library ~ # sg_ses -p 2 /dev/ses0 HP MSA60 2.18 Enclosure Status diagnostic page: INVOP=3D0, INFO=3D0, NON-CRIT=3D0, CRIT=3D0, UNRECOV=3D0 generation code: 0x0 status descriptor list Element type: Array device slot, subenclosure id: 0 [ti=3D0] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 1 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D1, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 2 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 3 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 4 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 5 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 6 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 7 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 8 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 9 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 10 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element 11 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK OK=3D0, Reserved device=3D0, Hot spare=3D0, Cons check=3D0 In crit array=3D0, In failed array=3D0, Rebuild/remap=3D0, R/R abor= t=3D0 App client bypass A=3D0, Do not remove=3D0, Enc bypass A=3D0, Enc b= ypass B=3D0 Ready to insert=3D0, RMV=3D0, Ident=3D0, Report=3D0 App client bypass B=3D0, Fault sensed=3D0, Fault reqstd=3D0, Device= off=3D0 Bypassed A=3D0, Bypassed B=3D0, Dev bypassed A=3D0, Dev bypassed B= =3D0 Element type: Power supply, subenclosure id: 0 [ti=3D1] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Ident=3D0, Do not remove=3D0, DC overvoltage=3D0, DC undervoltage= =3D0 DC overcurrent=3D0, Hot swap=3D0, Fail=3D0, Requested on=3D0, Off= =3D0 Overtmp fail=3D0, Temperature warn=3D0, AC fail=3D0, DC fail=3D0 Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D1, status: OK Ident=3D0, Do not remove=3D0, DC overvoltage=3D0, DC undervoltage= =3D0 DC overcurrent=3D0, Hot swap=3D0, Fail=3D0, Requested on=3D1, Off= =3D0 Overtmp fail=3D0, Temperature warn=3D0, AC fail=3D0, DC fail=3D0 Element 1 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D1, status: OK Ident=3D0, Do not remove=3D0, DC overvoltage=3D0, DC undervoltage= =3D0 DC overcurrent=3D0, Hot swap=3D0, Fail=3D0, Requested on=3D1, Off= =3D0 Overtmp fail=3D0, Temperature warn=3D0, AC fail=3D0, DC fail=3D0 Element type: Cooling, subenclosure id: 0 [ti=3D2] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Ident=3D0, Do not remove=3D0, Hot swap=3D0, Fail=3D0, Requested on= =3D0 Off=3D0, Actual speed=3D0 rpm, Fan stopped Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Do not remove=3D0, Hot swap=3D0, Fail=3D0, Requested on= =3D1 Off=3D0, Actual speed=3D4200 rpm, Fan at lowest speed Element 1 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Do not remove=3D0, Hot swap=3D0, Fail=3D0, Requested on= =3D1 Off=3D0, Actual speed=3D3600 rpm, Fan at lowest speed Element type: Cooling, subenclosure id: 0 [ti=3D3] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Ident=3D0, Do not remove=3D0, Hot swap=3D0, Fail=3D0, Requested on= =3D0 Off=3D0, Actual speed=3D0 rpm, Fan stopped Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Do not remove=3D0, Hot swap=3D0, Fail=3D0, Requested on= =3D1 Off=3D0, Actual speed=3D3600 rpm, Fan at lowest speed Element 1 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Do not remove=3D0, Hot swap=3D0, Fail=3D0, Requested on= =3D1 Off=3D0, Actual speed=3D3600 rpm, Fan at lowest speed Element type: Temperature sensor, subenclosure id: 0 [ti=3D4] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Ident=3D0, Fail=3D0, OT failure=3D0, OT warning=3D0, UT failure=3D0 UT warning=3D0 Temperature: <reserved> Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Fail=3D0, OT failure=3D0, OT warning=3D0, UT failure=3D0 UT warning=3D0 Temperature=3D27 C Element 1 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Fail=3D0, OT failure=3D0, OT warning=3D0, UT failure=3D0 UT warning=3D0 Temperature=3D27 C Element 2 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Fail=3D0, OT failure=3D0, OT warning=3D0, UT failure=3D0 UT warning=3D0 Temperature=3D24 C Element 3 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Fail=3D0, OT failure=3D0, OT warning=3D0, UT failure=3D0 UT warning=3D0 Temperature=3D24 C Element type: Enclosure services controller electronics, subenclosure i= d: 0 [ti=3D5] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Ident=3D0, Fail=3D0, Do not remove=3D0, Report=3D0, Hot swap=3D0 Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Fail=3D0, Do not remove=3D0, Report=3D1, Hot swap=3D0 Element type: Enclosure, subenclosure id: 0 [ti=3D6] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Ident=3D0, Time until power cycle=3D0, Failure indication=3D0 Warning indication=3D0, Requested power off duration=3D0 Failure requested=3D0, Warning requested=3D0 Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Time until power cycle=3D0, Failure indication=3D0 Warning indication=3D0, Requested power off duration=3D0 Failure requested=3D0, Warning requested=3D0 Element type: SAS expander, subenclosure id: 0 [ti=3D7] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Ident=3D0, Fail=3D0 Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Fail=3D0 Element type: SAS connector, subenclosure id: 0 [ti=3D8] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 1 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 2 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 3 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 4 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 5 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 6 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 7 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 8 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 9 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 10 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 11 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, SAS Drive backplane receptacle (SFF-8482) [max 2 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 12 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 13 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 14 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 15 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 16 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 17 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 18 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 19 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 20 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 21 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 22 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 23 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 24 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 25 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 26 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 27 descriptor: Predicted failure=3D0, Disabled=3D1, Swap=3D0, status: Unsupported Ident=3D0, No information Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 28 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys] Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 29 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 30 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys] Connector physical link=3D0x2, Mated=3D0, Fail=3D0, OC=3D0 Element 31 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys] Connector physical link=3D0x3, Mated=3D0, Fail=3D0, OC=3D0 Element 32 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys] Connector physical link=3D0x0, Mated=3D0, Fail=3D0, OC=3D0 Element 33 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys] Connector physical link=3D0x1, Mated=3D0, Fail=3D0, OC=3D0 Element 34 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys] Connector physical link=3D0x2, Mated=3D0, Fail=3D0, OC=3D0 Element 35 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Ident=3D0, Mini SAS 4x receptacle (SFF-8088) [max 4 phys] Connector physical link=3D0x3, Mated=3D0, Fail=3D0, OC=3D0 Element type: vendor specific [0x80], subenclosure id: 0 [ti=3D9] Overall descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: Unsupported Vendor specific element type, status in hex: 00 00 00 00 Element 0 descriptor: Predicted failure=3D0, Disabled=3D0, Swap=3D0, status: OK Vendor specific element type, status in hex: 01 20 ff ff library ~ # sg_ses -p 7 /dev/ses0 HP MSA60 2.18 sg_ses failed: Illegal request library ~ # sg_ses -p 0xa /dev/ses0 HP MSA60 2.18 Primary enclosure logical identifier (hex): 5001438001571280 Additional element status diagnostic page: generation code: 0x0 additional element status descriptor list Element type: Array device slot, subenclosure id: 0 [ti=3D0] Element index: 1 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 1 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x5001438001571281 phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 2 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 2 phy index: 0 SAS device type: end device initiator port for: target port for: SSP attached SAS address: 0x5001438001571280 SAS address: 0x5000c50034cd2731 phy identifier: 0x1 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 3 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 3 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x5001438001571283 phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 4 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 4 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x5001438001571284 phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 5 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 5 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x5001438001571285 phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 6 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 6 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x5001438001571286 phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 7 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 7 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x5001438001571287 phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 8 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 8 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x5001438001571288 phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 9 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 9 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x5001438001571289 phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 10 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 10 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x500143800157128a phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 11 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 11 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x500143800157128b phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 Element index: 12 eiioe=3D0 Transport protocol: SAS number of phys: 2, not all phys: 1, device slot number: 12 phy index: 0 SAS device type: no SAS device attached initiator port for: target port for: SATA_device attached SAS address: 0x5001438001571280 SAS address: 0x500143800157128c phy identifier: 0x0 phy index: 1 SAS device type: no SAS device attached initiator port for: target port for: attached SAS address: 0x0 SAS address: 0x0 phy identifier: 0x0 --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-248630-227-JTmNXBdfCo>