Date: Wed, 5 Jan 2011 13:28:53 GMT From: Tatsuki Makino <tatsuki_makino@hotmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: usb/153703: My USB keyboard does not use in 8-STABLE Message-ID: <201101051328.p05DSrjc094180@red.freebsd.org> Resent-Message-ID: <201101051330.p05DUHml081721@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 153703 >Category: usb >Synopsis: My USB keyboard does not use in 8-STABLE >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Jan 05 13:30:17 UTC 2011 >Closed-Date: >Last-Modified: >Originator: Tatsuki Makino >Release: FreeBSD 8.2-PRERELEASE i386 >Organization: 牧野　樹 >Environment: FreeBSD T2.test 8.2-PRERELEASE FreeBSD 8.2-PRERELEASE #0: Wed Jan 5 07:55:30 UTC 2011 root@T2.test:/usr/obj/usr/src/sys/GENERIC i386 >Description: My USB keyboard does not use in 8.2-PRERELEASE and 8.1-RELEASE. My USB keyborad is Japanese 109 keyboard recognized as `Fujitsu Fujitsu RF Comfort Keyboard / Mouse II, class 0/0, rev 1.10/2.00'. It is embedded in display VL-17WDX2G. (http:/ /www.fmworld.net/product/hard/dp0105/c_series.html) It is working boot0, boot1 and boot2 phase. But when kernel was booted, it respond only ミ田 Windows(R) key. >How-To-Repeat: Connecting VL-17WDX2G's USB line to motherboard's USB terminal. I tried the combination of Fujitsu C7/100WLT authorized and the combination with asus n4l-vm dh. boot0: I use BootMgr. Boot slice could be chosen by F1 key. boot2: Timer could be stopped by space key. Single user mode could be chosen by 4 key. Default boot could be chosen by 1 or Enter key. Kernel was loaded and was booted: Garbage character could be inputted by Win key. Logged in user used /bin/csh by using another USB keyboard: Mother board was beeped when push Win key. >Fix: I don't know. I need divine guidance. I have attached dmesg. Patch attached with submission follows: Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-PRERELEASE #0: Wed Jan 5 07:55:30 UTC 2011 root@T2.test:/usr/obj/usr/src/sys/GENERIC i386 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (2000.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Family = 6 Model = f Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 2086572032 (1989 MB) ACPI APIC Table: <A_M_I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <A_M_I OEMXSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI Warning: Incorrect checksum in table [OEMB] - 0x20, should be 0x13 (20101013/tbutils-354) cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1 hdac0: <Intel 82801G High Definition Audio Controller> mem 0xfebfc000-0xfebfffff irq 16 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20100226_0142 hdac0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <JMicron JMB363 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfe9fe000-0xfe9fffff irq 18 at device 0.0 on pci3 atapci0: [ITHREAD] atapci1: <AHCI SATA controller> on atapci0 atapci1: [ITHREAD] atapci1: AHCI v1.00 controller with 2 3Gbps ports, PM supported ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] ata4: <ATA channel 0> on atapci0 ata4: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Network Connection 7.1.8> port 0xcc00-0xcc1f mem 0xfe8e0000-0xfe8fffff irq 19 at device 0.0 on pci2 em0: Using an MSI interrupt em0: [FILTER] em0: Ethernet address: 00:17:31:9a:d1:a9 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xe480-0xe49f irq 23 at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup = 0x2f00 usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xe800-0xe81f irq 19 at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup = 0x2f00 usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xe880-0xe89f irq 18 at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup = 0x2f00 usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0 uhci3: [ITHREAD] uhci3: LegSup = 0x2f00 usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfebfbc00-0xfebfbfff irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfeaff800-0xfeafffff,0xfeaf8000-0xfeafbfff irq 21 at device 3.0 on pci5 fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:d8:00:00:ab:03:18 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x7db24000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:11:d8:ab:03:18 fwe0: Ethernet address: 02:11:d8:ab:03:18 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:11:d8:00:00:ab:03:18 @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode ath0: <Atheros 5212> mem 0xfeae0000-0xfeaeffff irq 21 at device 9.0 on pci5 ath0: [ITHREAD] ath0: AR5212 mac 5.9 RF5112 phy 4.3 pci5: <multimedia> at device 10.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci2: <Intel ICH7M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0 ata0: <ATA channel 0> on atapci2 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci2 ata1: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff,0xd0000-0xd2fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ad0: 476940MB <Hitachi HTS545050B9A300 PB4OC64G> at ata0-master UDMA100 SATA ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ad1: 305245MB <Hitachi HDT725032VLA360 V54OA73A> at ata0-slave UDMA100 SATA ad2: 57259MB <MAXTOR 6L060L3 A93.0500> at ata1-master UDMA133 hdac0: HDA Codec #0: Realtek ALC882 pcm0: <HDA Realtek ALC882 PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Realtek ALC882 PCM #1 Analog> at cad 0 nid 1 on hdac0 pcm2: <HDA Realtek ALC882 PCM #2 Digital> at cad 0 nid 1 on hdac0 SMP: AP CPU #1 Launched! uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered GEOM: ad1s2: geometry does not match label (255h,63s != 16h,63s). GEOM: ad2s1: geometry does not match label (255h,63s != 16h,63s). Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Root mount waiting for: usbus4 Trying to mount root from ufs:/dev/ad0s1a ugen0.2: <vendor 0x0451> at usbus0 uhub5: <General Purpose USB Hub> on usbus0 uhub5: 3 ports with 1 removable, self powered ugen0.3: <Fujitsu> at usbus0 ukbd0: <Fujitsu Fujitsu RF Comfort Keyboard / Mouse II, class 0/0, rev 1.10/2.00, addr 3> on usbus0 kbd2 at ukbd0 ums0: <Fujitsu Fujitsu RF Comfort Keyboard / Mouse II, class 0/0, rev 1.10/2.00, addr 3> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 ugen0.4: <Fujitsu> at usbus0 uhid0: <Fujitsu Message Board, class 0/0, rev 1.10/1.00, addr 4> on usbus0 ugen0.5: <vendor 0x099a> at usbus0 ukbd1: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/1.00, addr 5> on usbus0 kbd3 at ukbd1 uhid1: <vendor 0x099a USB Keyboard, class 0/0, rev 1.10/1.00, addr 5> on usbus0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201101051328.p05DSrjc094180>