From owner-freebsd-questions@FreeBSD.ORG Mon Nov 28 04:48:20 2005 Return-Path: X-Original-To: freebsd-questions@freebsd.org Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 5418016A41F for ; Mon, 28 Nov 2005 04:48:20 +0000 (GMT) (envelope-from a.mattke@gmail.com) Received: from zproxy.gmail.com (zproxy.gmail.com [64.233.162.201]) by mx1.FreeBSD.org (Postfix) with ESMTP id 95ED843D4C for ; Mon, 28 Nov 2005 04:48:19 +0000 (GMT) (envelope-from a.mattke@gmail.com) Received: by zproxy.gmail.com with SMTP id 9so1083952nzo for ; Sun, 27 Nov 2005 20:48:19 -0800 (PST) DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=OcBEd+syigoNoZ5qpx+U/GOx9a7iDPCFG3YUjPZuLfT/soUIKeSwsf0pib9mm0Gm1v/5yRq4F8bwe1WJdgCyydGNglL6H9YA1UfpBxPh+cUAxsdvsVXNV3Nh40z5j68QRZXZyadP8QR47EScaltcxY/qzC7Cq/r/bE4gWkd8nwg= Received: by 10.37.21.18 with SMTP id y18mr3007335nzi; Sun, 27 Nov 2005 20:48:19 -0800 (PST) Received: by 10.37.13.78 with HTTP; Sun, 27 Nov 2005 20:48:18 -0800 (PST) Message-ID: <2b9aedcc0511272048k7fd32194m4badb675916fe736@mail.gmail.com> Date: Sun, 27 Nov 2005 23:48:18 -0500 From: Anthony Mattke To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Subject: pc cards on watchguard firebox II X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 28 Nov 2005 04:48:20 -0000 I have a WatchGuard Firebox II that I've been working on turning into a decent router. I see many people have installed monowall (http://m0n0.ch/wall/) on these boxes with good success. I would be done myself unless I was setting up a wireless bridge. These boxes are basicly custom pentium 200's with 3 ethernet ports, a few serial ports, 2 pcmcia card slots, a 44pin ide header, a keyboard header, and 2 backwards facing pci slots. The problem I am having is with getting a pc card to be detected, it knows they're there, it just wont register them. First off, I'm new to BSD. Second, I know this is not straight up BSD, but if given direction I can make anything happen that needs to for testing, I have a 5.3 box setup for testing, altho I'm having trouble getting it to boot on the firebox ( i need to recompile and disabe psm0 detection) Anyway, this is what I'm seeing. pci_cfgintr: can't route an interrupt to 0:16 INTA pcic0: at device 16.0 on pci0 pcic0: PCI Memory allocated: 0x88000000 pci_cfgintr: can't route an interrupt to 0:16 INTA pcic0: No PCI interrupt routed, trying ISA. pcic0: Polling mode pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] pccard0: on pcic0 pci_cfgintr: can't route an interrupt to 0:16 INTB pcic1: at device 16.1 on pci0 pcic1: PCI Memory allocated: 0x88001000 pci_cfgintr: can't route an interrupt to 0:16 INTB pcic1: No PCI interrupt routed, trying ISA. pcic1: Polling mode pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] pccard1: on pcic1 pmtimer0 on isa0 I've google'd and google'd and poked and prodded, I've added the following to /boot/loader.conf, with no success. hint.acpi.0.disabled=3D1 hw.cbb.start_memory=3D0x20000000 If you want a look at the kernel config it is located here. (this is for monowall, not my 5.3 box, that has yet to be recompiled) http://m0n0.ch/wall/downloads/freeb...0N0WALL_GENERIC Any suggestions on where to go next? If you need any output, or anything, let me know. Thanks in advance, Tony