Date: Wed, 15 Jun 2005 23:25:41 +0430 From: Babak Farrokhi <bfarrokhi@gmail.com> To: Philippe PEGON <Philippe.Pegon@crc.u-strasbg.fr> Cc: stable@freebsd.org, Palle Girgensohn <girgen@freebsd.org>, hardware@freebsd.org Subject: Re: Proliant 380 G4 Message-ID: <9f7e126b05061511551a16aad2@mail.gmail.com> In-Reply-To: <42B07179.4020407@crc.u-strasbg.fr> References: <ED809109F139BCD5FD191374@rambutan.pingpong.net> <42B07179.4020407@crc.u-strasbg.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
The 6i controller support is included in 4.11, so if you want to go with 4.x family, 4.11 is your best bet. I am also running 5.3 and 5.4 on G4s without any problem. -- Babak Farrokhi On 6/15/05, Philippe PEGON <Philippe.Pegon@crc.u-strasbg.fr> wrote: > Palle Girgensohn a =E9crit : > > Hi! > > > > Just a quick check - a client is getting a Proliant 380 G4 with a "6i" > > Raid controller. Haven't used this hardware before. Will it work fine > > with FreeBSD? Which version will work best, 5.4 or 4.11? Any > > peculiarities or things to think about? > > > > Any input appreciated! >=20 > we have 3 Proliant 380 G4 and hardware works fine. For your information, = I attach a dmesg of one of > them. I've just another problem, but I don't think that it comes from har= dware : >=20 > http://lists.freebsd.org/pipermail/freebsd-stable/2005-June/015952.html >=20 > > > > Thanks > > Palle >=20 > -- > Philippe PEGON >=20 >=20 > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-STABLE #3: Thu May 19 20:35:36 CEST 2005 > root@crc.u-strasbg.fr:/usr/obj/usr/src/sys/NS1A > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3600.15-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0xf41 Stepping =3D 1 > Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory =3D 2147430400 (2047 MB) > avail memory =3D 2095968256 (1998 MB) > ACPI APIC Table: <HP 00000083> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 6 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > ioapic2 <Version 2.0> irqs 48-71 on motherboard > ioapic3 <Version 2.0> irqs 72-95 on motherboard > ioapic4 <Version 2.0> irqs 96-119 on motherboard > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <HP P51> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci2: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2 > pci3: <ACPI PCI bus> on pcib2 > bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xf= def0000-0xfdefffff irq 25 at device 1.0 on pci3 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 100= 0baseTX-FDX, auto > bge0: Ethernet address: 00:12:79:d8:a0:37 > bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xf= dee0000-0xfdeeffff irq 26 at device 1.1 on pci3 > miibus1: <MII bus> on bge1 > brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 100= 0baseTX-FDX, auto > bge1: Ethernet address: 00:12:79:d8:a0:36 > pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci2 > pci4: <ACPI PCI bus> on pcib3 > ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem 0xfdf80000-0xfdfbffff,0= xfdff0000-0xfdff1fff irq 51 at device 3.0 on pci4 > pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci5: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci5 > pci6: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> at device 0.2 on pci5 > pci10: <ACPI PCI bus> on pcib6 > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2000-0x201f irq= 16 at device 29.0 on pci0 > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2020-0x203f irq= 19 at device 29.1 on pci0 > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x2040-0x205f irq= 18 at device 29.2 on pci0 > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x2060-0x207f irq= 16 at device 29.3 on pci0 > usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > pci0: <serial bus, USB> at device 29.7 (no driver attached) > pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib7 > pci1: <display, VGA> at device 3.0 (no driver attached) > pci1: <base peripheral> at device 4.0 (no driver attached) > pci1: <base peripheral> at device 4.2 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port 0x500-0x50f,0x376,0x170-0x1= 77,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci0 > ata1: channel #1 on atapci0 > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse Explorer, device ID 4 > sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acp= i0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acp= i0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > orm0: <ISA Option ROMs> at iomem 0xee000-0xeffff,0xc8000-0xcbfff,0xc0000-= 0xc7fff on isa0 > pmtimer0 on isa0 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > acd0: CDROM <COMPAQ CD-ROM SN-124/N104> at ata0-master PIO4 > da0 at ciss0 bus 0 target 0 lun 0 > da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device > da0: 135.168MB/s transfers > da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C) > da1 at ciss0 bus 0 target 1 lun 0 > da1: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device > da1: 135.168MB/s transfers > da1: 69455MB (142245120 512 byte sectors: 255H 32S/T 17432C) > SMP: AP CPU #1 Launched! > Mounting root from ufs:/dev/da0s1a >=20 >=20 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >=20 >=20 --
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9f7e126b05061511551a16aad2>