From owner-freebsd-stable@FreeBSD.ORG Tue Nov 8 16:30:43 2005 Return-Path: X-Original-To: freebsd-stable@freebsd.org Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6DAA816A41F for ; Tue, 8 Nov 2005 16:30:43 +0000 (GMT) (envelope-from pkeusem@visi.com) Received: from cenn.mc.mpls.visi.com (cenn.mc.mpls.visi.com [208.42.156.9]) by mx1.FreeBSD.org (Postfix) with ESMTP id EF64343D45 for ; Tue, 8 Nov 2005 16:30:42 +0000 (GMT) (envelope-from pkeusem@visi.com) Received: from isis.visi.com (isis.visi.com [209.98.98.8]) by cenn.mc.mpls.visi.com (Postfix) with ESMTP id DE1FF83DE for ; Tue, 8 Nov 2005 10:30:41 -0600 (CST) Received: by isis.visi.com (Postfix, from userid 5168) id A25F276C71; Tue, 8 Nov 2005 10:30:41 -0600 (CST) Date: Tue, 8 Nov 2005 10:30:41 -0600 From: Paul Keusemann To: freebsd-stable@freebsd.org Message-ID: <20051108163041.GB4622@isis.visi.com> Mail-Followup-To: Paul Keusemann , freebsd-stable@freebsd.org Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="3uo+9/B/ebqu+fSQ" Content-Disposition: inline User-Agent: Mutt/1.3.27i Subject: 5-stable kernel hang during boot X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Paul Keusemann List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 08 Nov 2005 16:30:43 -0000 --3uo+9/B/ebqu+fSQ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi, I've got an IBM Intellistation M Pro with dual 600 Mhz PIIIs, an IBM DNES-309170W (da0 on ahc0) as the root drive and HighPoint RocketRaid 1520 with two WD1600JD drives mirrored as data drives. There is nothing on ata0 and the CD-ROM drive is the master on ata1. I have been running a custom kernel (GENERIC with SMP) since installation. The verbose output from dmesg from the a 5.4 Release kernel (booted from CD-ROM) is attached. I installed 5.3 Release on this machine a while back and just decided to try to upgrade to 5.4 Stable. (This is my first attempt at doing a buildworld upgrade.) I cvsup'ed /usr/src using the stable-supfile in /usr/share/examples/cvsup. I then followed the instructions in /usr/src/Makefile to build world, build a new custom kernel and install the new kernel. Then I attempted to reboot into single user mode. The boot hangs while processing ata1, right after the following: ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 The really interesting part is that after installing the new kernel, I can't boot from kernel.old or another backup of my custom kernel. They both hang in the same way as the new kernel. If I boot off the 5.4 Release CD-ROM, remove the new kernel and rename kernel.old to kernel, the system comes up just fine. At this point I guess I'm looking for any help I can get. Could the fact that there is nothing on ata0 be causing a problem? I know I can boot the 5.4 Release kernel, would I be better off upgrading from the install? I have had no problems with this machine so I can just scratch the upgrade, but it would be nice to be able to get it up to 5-stable and eventually 6-stable. -- Paul Keusemann pkeusem@visi.com 4266 Joppa Court (952) 894-7805 Savage, MN 55378 --3uo+9/B/ebqu+fSQ Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.out" SMP: Added CPU 1 (BSP) SMP: Added CPU 0 (AP) MPTable: APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 1 cpu1 (AP): APIC ID: 0 bios32: Found BIOS32 Service Directory header at 0xc00fd800 bios32: Entry = 0xfd811 (c00fd811) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xd84c pnpbios: Found PnP BIOS data at 0xc00fde60 pnpbios: Entry = f0000:5bea Rev = 1.0 Other BIOS signatures found: ioapic0: Assuming intbase of 0 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) ioapic0: intpin 1 bus ISA ioapic0: intpin 1 trigger: edge ioapic0: intpin 1 polarity: high ioapic0: intpin 2 bus ISA ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high ioapic0: intpin 3 bus ISA ioapic0: intpin 3 trigger: edge ioapic0: intpin 3 polarity: high ioapic0: intpin 4 bus ISA ioapic0: intpin 4 trigger: edge ioapic0: intpin 4 polarity: high ioapic0: intpin 5 bus ISA ioapic0: intpin 5 trigger: edge ioapic0: intpin 5 polarity: high ioapic0: intpin 6 bus ISA ioapic0: intpin 6 trigger: edge ioapic0: intpin 6 polarity: high ioapic0: intpin 7 bus ISA ioapic0: intpin 7 trigger: edge ioapic0: intpin 7 polarity: high ioapic0: intpin 8 bus ISA ioapic0: intpin 8 trigger: edge ioapic0: intpin 8 polarity: high ioapic0: intpin 12 bus ISA ioapic0: intpin 12 trigger: edge ioapic0: intpin 12 polarity: high ioapic0: intpin 13 bus ISA ioapic0: intpin 13 trigger: edge ioapic0: intpin 13 polarity: high ioapic0: intpin 15 bus ISA ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: high ioapic0: Routing SMI -> intpin 23 ioapic0: intpin 18 bus PCI ioapic0: intpin 18 trigger: level ioapic0: intpin 18 polarity: low ioapic0: intpin 19 bus PCI ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: low ioapic0: intpin 19 bus PCI ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: low ioapic0: intpin 19 bus PCI ioapic0: intpin 19 trigger: level ioapic0: intpin 19 polarity: low ioapic0: intpin 17 bus PCI ioapic0: intpin 17 trigger: level ioapic0: intpin 17 polarity: low ioapic0: intpin 16 bus PCI ioapic0: intpin 16 trigger: level ioapic0: intpin 16 polarity: low lapic: Routing ExtINT -> LINT0 lapic: LINT0 trigger: edge lapic: LINT0 polarity: active-high lapic: Routing NMI -> LINT1 lapic: LINT1 trigger: edge lapic: LINT1 polarity: active-high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> null: random: io: mem: Pentium Pro MTRR support enabled npx0: [FAST] npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00f1d50 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 5 0 15 A 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 5 0 15 B 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 5 0 15 C 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 5 0 15 D 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 4 0 14 A 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 4 0 14 B 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 4 0 14 C 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 4 0 14 D 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 3 0 13 A 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 3 0 13 B 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 3 0 13 C 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 3 0 13 D 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 16 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 16 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 16 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 0 16 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 17 A 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 17 B 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 17 C 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 1 0 17 D 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 6 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e4000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e3fff000, size 12, enabled map[14]: type 4, range 32, base 00006c60, size 5, enabled map[18]: type 1, range 32, base f6f00000, size 20, enabled pcib0: slot 2 INTA routed to irq 18 found-> vendor=0x8086, dev=0x1229, revid=0x05 bus=0, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=18 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00007000, size 8, enabled map[14]: type 1, range 32, base f6efe000, size 12, enabled pcib0: slot 3 INTA routed to irq 19 found-> vendor=0x9004, dev=0x7895, revid=0x04 bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=19 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 00007400, size 8, enabled map[14]: type 1, range 32, base f6eff000, size 12, enabled pcib0: slot 3 INTB routed to irq 19 found-> vendor=0x9004, dev=0x7895, revid=0x04 bus=0, slot=3, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=b, irq=19 powerspec 1 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=4, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fff0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=4, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ff00, size 5, enabled pcib0: slot 4 INTD routed to irq 19 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=4, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=19 map[90]: type 4, range 32, base 0000fe00, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=4, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00006c50, size 3, enabled map[14]: type 4, range 32, base 00006c48, size 2, enabled map[18]: type 4, range 32, base 00006c58, size 3, enabled map[1c]: type 4, range 32, base 00006c4c, size 2, enabled map[20]: type 4, range 32, base 00007800, size 8, enabled pcib0: slot 17 INTA routed to irq 17 found-> vendor=0x1103, dev=0x0005, revid=0x02 bus=0, slot=17, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=17 powerspec 2 supports D0 D3 current D0 agp0: mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf7000000-0xf7ffffff pcib1: prefetched decode 0xe8000000-0xf6dfffff pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base f7000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xf7000000-0xf7ffffff map[14]: type 3, range 32, base e8000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe8000000-0xefffffff pcib1: slot 0 INTA routed to irq 16 found-> vendor=0x10de, dev=0x0110, revid=0xb2 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x28 (1200 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) fxp0: port 0x6c60-0x6c7f mem 0xf6f00000-0xf6ffffff,0xe3fff000-0xe3ffffff irq 18 at device 2.0 on pci0 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe3fff000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 1229 1014 00d7 0005 fxp0: Dynamic Standby mode is disabled miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached fxp0: Ethernet address: 00:06:29:ee:08:e2 fxp0: [MPSAFE] ahc0: port 0x7000-0x70ff mem 0xf6efe000-0xf6efefff irq 19 at device 3.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x7000 ahc0: Reading SEEPROM...done. ahc0: Low byte termination Enabled ahc0: High byte termination Enabled ahc0: Downloading Sequencer Program... 413 instructions downloaded ahc0: Features 0x16235, Bugs 0x15, Flags 0x20485560 ahc0: [GIANT-LOCKED] aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: port 0x7400-0x74ff mem 0xf6eff000-0xf6efffff irq 19 at device 3.1 on pci0 ahc1: Defaulting to MEMIO off ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x7400 ahc1: Reading SEEPROM...done. ahc1: Low byte termination Enabled ahc1: High byte termination Enabled ahc1: Downloading Sequencer Program... 413 instructions downloaded ahc1: Features 0x16235, Bugs 0x15, Flags 0x20485560 ahc1: [GIANT-LOCKED] aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs isab0: at device 4.0 on pci0 isa0: on isab0 atapci0: port 0xfff0-0xffff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfff0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4 ata1: [MPSAFE] uhci0: port 0xff00-0xff1f irq 19 at device 4.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff00 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered piix0: port 0xfe00-0xfe0f at device 4.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 atapci1: port 0x7800-0x78ff,0x6c4c-0x6c4f,0x6c58-0x6c5f,0x6c48-0x6c4b,0x6c50-0x6c57 irq 17 at device 17.0 on pci0 atapci1: Reserved 0x100 bytes for rid 0x20 type 4 at 0x7800 atapci1: [MPSAFE] ata2: channel #0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x6c50 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x6c48 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata3: channel #1 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x6c58 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x6c4c ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata3-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] cpu0 on motherboard cpu1 on motherboard ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 CSC0100: start dependent (0) CSC0100: adding dma mask 0x2 CSC0100: adding dma mask 0x9 CSC0100: adding irq mask 0x20 CSC0100: adding io range 0x534-0x537, size=0x4, align=0x4 CSC0100: adding io range 0x388-0x38b, size=0x4, align=0x8 CSC0100: adding io range 0x220-0x22f, size=0x10, align=0x20 CSC0100: start dependent (1) CSC0100: adding dma mask 0xa CSC0100: adding dma mask 0xb CSC0100: adding irq mask 0x9aa0 CSC0100: adding io range 0x534-0xfff, size=0x4, align=0x4 CSC0100: adding io range 0x388-0x38b, size=0x4, align=0x8 CSC0100: adding io range 0x220-0x26f, size=0x10, align=0x20 CSC0100: start dependent (2) CSC0100: adding dma mask 0xb CSC0100: adding irq mask 0x9aa0 CSC0100: adding io range 0x534-0xfff, size=0x4, align=0x4 CSC0100: adding io range 0x388-0x3fb, size=0x4, align=0x8 CSC0100: adding io range 0x220-0x30f, size=0x10, align=0x20 CSC0100: end dependent CSC0110: adding io range 0x120-0xfe7, size=0x8, align=0x8 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff pnpbios: 21 devices, largest 224 bytes PNP0200: adding io range 0-0x1f, size=0x20, align=0x1 PNP0200: adding io range 0x80-0x8f, size=0x10, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 4 device ID PNP0b00 (000bd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 pnpbios: handle 8 device ID PNP0a03 (030ad041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x2fffffff, size=0x2ff00000 pnpbios: handle 9 device ID PNP0c01 (010cd041) PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 pnpbios: handle 10 device ID PNP0c01 (010cd041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 11 device ID PNP0f13 (130fd041) pnpbios: handle 12 device ID PNP0c02 (020cd041) pnpbios: handle 13 device ID PNP0c02 (020cd041) PNP0c02: adding fixed io range 0x2e-0x2f, size=0x2, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 pnpbios: handle 14 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x290-0x297, size=0x8, align=0x1 pnpbios: handle 15 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0xfd00-0xfd3f, size=0x40, align=0x1 PNP0c02: adding io range 0xfe00-0xfe0f, size=0x10, align=0x1 pnpbios: handle 16 device ID PNP0c02 (020cd041) PNP0700: adding irq mask 0x40 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1 PNP0700: adding dma mask 0x4 pnpbios: handle 17 device ID PNP0700 (0007d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 18 device ID PNP0501 (0105d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 pnpbios: handle 19 device ID PNP0501 (0105d041) PNP0401: adding irq mask 0x80 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0 pnpbios: handle 20 device ID PNP0401 (0104d041) PNP0c01: adding fixed memory32 range 0xccc00-0xccfff, size=0x400 PNP0c01: adding fixed memory32 range 0xd5e00-0xd7fff, size=0x2200 pnpbios: handle 21 device ID PNP0c01 (010cd041) ahc_isa_probe 6: ioport 0x6c00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xcd800-0xd1fff,0xcd000-0xcd7ff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0045 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0045 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: ic_type 90 part_id 73 fdc0: at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: ic_type 90 part_id 73 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x2021 0x2031 0x2021 0x2021 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x2021 0x2029 0x2021 0x2021 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x534 specified. Nearest valid baseport is 0x330. Failing probe. unknown: failed to probe at port 0x220-0x22f,0x388-0x38b,0x534-0x537 irq 5 drq 0,1 on isa0 unknown: failed to probe on isa0 unknown: failed to probe at port 0x120-0x127 on isa0 adv1: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100. Failing probe. unknown: failed to probe at port 0x61 on isa0 unknown: can't assign resources (port) unknown: at port 0x60 on isa0 adv1: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100. Failing probe. adv1: Invalid baseport of 0xcf8 specified. Nearest valid baseport is 0x330. Failing probe. unknown: can't assign resources (irq) unknown: at irq 12 on isa0 unknown: can't assign resources (port) unknown: at port 0x4d0-0x4d1,0x2e-0x2f on isa0 adv1: Invalid baseport of 0x290 specified. Nearest valid baseport is 0x330. Failing probe. unknown: can't assign resources (port) unknown: at port 0xfe00-0xfe0f,0xfd00-0xfd3f on isa0 unknown: can't assign resources (port) unknown: at port 0x3f0-0x3f5 on isa0 unknown: can't assign resources (port) unknown: at port 0x3f8-0x3ff on isa0 unknown: can't assign resources (port) unknown: at port 0x2f8-0x2ff on isa0 unknown: can't assign resources (port) unknown: at port 0x378-0x37f on isa0 Device configuration finished. procfs registered Timecounter "TSC" frequency 598980737 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel PIIX4 chip ata1-master: setting UDMA33 on Intel PIIX4 chip acd0: CDROM drive at ata1 as master acd0: read 6875KB/s (6875KB/s), 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked, lock protected acd0: Medium: no/blank disc ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata2-master: setting PIO4 on HighPoint chip ata2-master: setting UDMA133 on HighPoint chip ad4: ATA-6 disk at ata2-master ad4: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA133 ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata3-master: setting PIO4 on HighPoint chip ata3-master: setting UDMA133 on HighPoint chip ad6: ATA-6 disk at ata3-master ad6: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, UDMA133 lun 0 magic_0 0x32bc0abc magic_1 0x00000000 flags 0x40104 40104 total_disks 2 generation 0 width 1 heads 255 sectors 63 cylinders 19457 total_sectors 312581807 interleave 0 reserved 10 offset 10 disk 0: flags = 0x0b b ad4 sectors 312581807 disk 1: flags = 0x0b b ad6 sectors 312581807 ar0: 152627MB [19457/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. GEOM: new disk ad4 GEOM: new disk ad6 GEOM: new disk ar0 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s1, start 32256 length 160039240704 end 160039272959 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad6s1, start 32256 length 160039240704 end 160039272959 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:312576642 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ar0s1, start 32256 length 160039240704 end 160039272959 GEOM: Configure ad4s1c, start 0 length 160039240704 end 160039240703 GEOM: Configure ad4s1e, start 0 length 42949672960 end 42949672959 GEOM: Configure ad4s1f, start 42949672960 length 42949672960 end 85899345919 GEOM: Configure ad4s1g, start 85899345920 length 42949672960 end 128849018879 GEOM: Configure ad4s1h, start 128849018880 length 31190221824 end 160039240703 GEOM: Configure ad6s1c, start 0 length 160039240704 end 160039240703 GEOM: Configure ad6s1e, start 0 length 42949672960 end 42949672959 GEOM: Configure ad6s1f, start 42949672960 length 42949672960 end 85899345919 GEOM: Configure ad6s1g, start 85899345920 length 42949672960 end 128849018879 GEOM: Configure ad6s1h, start 128849018880 length 31190221824 end 160039240703 GEOM: Configure ar0s1c, start 0 length 160039240704 end 160039240703 GEOM: Configure ar0s1e, start 0 length 42949672960 end 42949672959 GEOM: Configure ar0s1f, start 42949672960 length 42949672960 end 85899345919 GEOM: Configure ar0s1g, start 85899345920 length 42949672960 end 128849018879 GEOM: Configure ar0s1h, start 128849018880 length 31190221824 end 160039240703 ahc0: Selection Timeout on A:11. 0 SCBs aborted ahc1: Selection Timeout on A:0. 0 SCBs aborted ahc0: Selection Timeout on A:1. 0 SCBs aborted ahc1: Selection Timeout on A:1. 0 SCBs aborted ahc0: Selection Timeout on A:2. 0 SCBs aborted ahc1: Selection Timeout on A:2. 0 SCBs aborted ahc0: Selection Timeout on A:3. 0 SCBs aborted ahc1: Selection Timeout on A:3. 0 SCBs aborted ahc0: Selection Timeout on A:5. 0 SCBs aborted ahc1: Selection Timeout on A:4. 0 SCBs aborted ahc0: Selection Timeout on A:6. 0 SCBs aborted ahc1: Selection Timeout on A:5. 0 SCBs aborted ahc0: Selection Timeout on A:8. 0 SCBs aborted ahc1: Selection Timeout on A:11. 0 SCBs aborted ahc0: Selection Timeout on A:9. 0 SCBs aborted ahc1: Selection Timeout on A:12. 0 SCBs aborted ahc0: Selection Timeout on A:10. 0 SCBs aborted ahc1: Selection Timeout on A:13. 0 SCBs aborted ahc0: Selection Timeout on A:12. 0 SCBs aborted ahc1: Selection Timeout on A:14. 0 SCBs aborted ahc0: Selection Timeout on A:13. 0 SCBs aborted ahc1: Selection Timeout on A:15. 0 SCBs aborted ahc0: Selection Timeout on A:14. 0 SCBs aborted ahc1: Selection Timeout on A:6. 0 SCBs aborted ahc0: Selection Timeout on A:15. 0 SCBs aborted (ahc0:A:4:0): Sending WDTR 1 (probe0:ahc0:0:0:0): Retrying Command (ahc0:A:4:0): Received WDTR 1 filtered to 1 ahc0: target 4 using 16bit transfers (ahc0:A:4:0): Sending SDTR period c, offset 8 (ahc0:A:4:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 ahc0: target 4 synchronous at 20.0MHz, offset = 0x8 ahc1: Selection Timeout on A:8. 0 SCBs aborted (ahc0:A:4:0): Sending WDTR 1 (ahc0:A:4:0): Received WDTR 1 filtered to 1 ahc0: target 4 using 16bit transfers (ahc0:A:4:0): Sending SDTR period c, offset 8 (ahc0:A:4:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 ahc0: target 4 synchronous at 20.0MHz, offset = 0x8 (ahc0:A:0:0): Sending WDTR 1 (ahc0:A:0:0): Received WDTR 1 filtered to 1 ahc0: target 0 using 16bit transfers (ahc0:A:0:0): Sending SDTR period c, offset 8 (ahc0:A:0:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 ahc0: target 0 synchronous at 20.0MHz, offset = 0x8 ahc1: Selection Timeout on A:9. 0 SCBs aborted ahc1: Selection Timeout on A:10. 0 SCBs aborted pass0 at ahc0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-3 device pass0: Serial Number AJH87942 pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 4 lun 0 pass1: Removable Sequential Access SCSI-3 device pass1: Serial Number HN000A4 pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) sa0 at ahc0 bus 0 target 4 lun 0 sa0: Removable Sequential Access SCSI-3 device sa0: Serial Number HN000A4 sa0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit) GEOM: new disk da0 SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number AJH87942 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C) [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17767827 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 9097127424 end 9097159679 GEOM: Configure da0s1a, start 0 length 268435456 end 268435455 GEOM: Configure da0s1b, start 268435456 length 536870912 end 805306367 GEOM: Configure da0s1c, start 0 length 9097127424 end 9097127423 GEOM: Configure da0s1e, start 805306368 length 268435456 end 1073741823 GEOM: Configure da0s1f, start 1073741824 length 4294967296 end 5368709119 GEOM: Configure da0s1g, start 5368709120 length 3728418304 end 9097127423 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/init --3uo+9/B/ebqu+fSQ--