Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 17 Feb 2003 04:00:18 -0700
From:      Scott Long <scott_long@btc.adaptec.com>
To:        "Dubinin, Alexander" <Alexander.Dubinin@intel.com>
Cc:        "'Scott Long'" <scottl@freebsd.org>, freebsd-bugs@freebsd.org
Subject:   Re: kern/40481: Kernel fault on detecting Mylex eXtreme RAID 3000 controller
Message-ID:  <3E50C0C2.4080800@btc.adaptec.com>
In-Reply-To: <67B5ACB373D0D411B9BD00508BD951A7CF9878@nnsmsx30.inn.intel.com>
References:  <67B5ACB373D0D411B9BD00508BD951A7CF9878@nnsmsx30.inn.intel.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Dubinin, Alexander wrote:

> Hi Scott,
>
> Ok. I'll do it, but only week later - Ok?
>
> Yes, it seems to work in 5.0-RELEASE, but then I tried to move data on 
> RAID
> it just hangs without any messages in kernel log, approximately after
> copying ~1 Gb of data.
> And it gives lot of messages like "Can't update cache" in kernel log 
> then I
> making partition and slices.
>
> Unfortunately, system was reinstalled, and I have no 5.0 anymore.
> I'll do more experiments for you, as soon as find some free time.
>
> Regards,
>   Alexander Dubinin.
>
> PS: It's not a card's bug - it working good enougth under Linux and 
> Windows.


Alexander,

Thanks for the reply.  The driver in FreeBSD 5.0 has a bug that is
most likely causing the problem that you're seeing in there.  I
fixed it about a week ago in 5-CURRENT, so you'll need to update in
order for it to work.  As for 4.x, I discovered that the driver there
was never updated for the newer generation of cards, of which I think
the ER3000 is part of.  If the card does wind up working well on
5-CURRENT, I'll work on updating the driver in 4.x.

Scott

>
>
> >-----Original Message-----
> >From: Scott Long [mailto:scottl@FreeBSD.org]
> >Sent: Saturday, February 15, 2003 2:58 AM
> >To: alexander.dubinin@intel.com; scottl@FreeBSD.org;
> >freebsd-bugs@FreeBSD.org
> >Subject: Re: kern/40481: Kernel fault on detecting Mylex
> >eXtreme RAID 3000 controller
> >
> >
> >Synopsis: Kernel fault on detecting Mylex eXtreme RAID 3000 controller
> >
> >State-Changed-From-To: open->feedback
> >State-Changed-By: scottl
> >State-Changed-When: Fri Feb 14 15:56:15 PST 2003
> >State-Changed-Why:
> >I only have access to an eXtreme RAID 2000, and it appears to
> >work fine.
> >Can you try removing the card, installing onto another disk, inserting
> >the card, and capturing the crash via a serial console?  Also, does it
> >behave any different under 5.0-R?
> >
> >http://www.freebsd.org/cgi/query-pr.cgi?pr=40481
> >




To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E50C0C2.4080800>