Date: Thu, 04 Oct 2001 01:43:59 +0300 From: Stoian Mishinev <mishinev@digsys.bg> To: freebsd-stable@freebsd.org Subject: Aironet driver Message-ID: <200110032243.BAA10360@ws5-plovdiv.digsys.bg>
next in thread | raw e-mail | index | archive | help
Hi List,
I'm trying to set max TX speed on Cisco Aironet adapter and having the folowing problem:
s2.05# ifconfig an0 media DS/1Mbps
ifconfig: SIOCGIFMEDIA: Operation not permitted
su-2.05# ifconfig -m an0
an0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 193.68.24.143 netmask 0xffffffe0 broadcast 193.68.24.159
ether 00:07:0e:b3:95:2a
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: associated
supported media:
media autoselect
media autoselect mediaopt adhoc
media DS/11Mbps
media DS/11Mbps mediaopt adhoc
media DS/5.5Mbps
media DS/5.5Mbps mediaopt adhoc
media DS/2Mbps
media DS/2Mbps mediaopt adhoc
media DS/1Mbps
media DS/1Mbps mediaopt adhoc
ssid SSID-TEST
stationname NAME-TEST
channel 7 authmode OPEN powersavemode OFF powersavesleep 200
wepmode OFF weptxkey 1
after that I've trying to set via ancontrol, there wasnt errors but wasnt and efect :-).
befor ancontrol:
su-2.05# ancontrol -i an0 -S
MAC address: [ 00:07:0e:b3:95:2a ]
Operating mode: [ configured MAC ON RX ON synced associated ]
Error code: [ 00 ]
Signal quality: [ 1d ]
Current TX rate: [ 11 ]
Current SSID: [ SSID-TEST ]
Current AP name: [ SOME BRI342 ]
Current BSSID: [ 00:40:96:34:d3:eb ]
Beacon period: [ 100 ]
DTIM period: [ 2 ]
ATIM duration: [ 0 ]
HOP period: [ 200 ]
Channel set: [ 0 ]
Current channel: [ 7 ]
Hops to backbone: [ 1 ]
Total AP load: [ 0 ]
Our generated load: [ 0 ]
Accumulated ARL: [ 0 ]
u-2.05#
then :
su-2.05#
su-2.05# ancontrol -i an0 -t 1
su-2.05#
and the result is:
su-2.05ancontrol -i an0 -S
MAC address: [ 00:07:0e:b3:95:2a ]
Operating mode: [ configured MAC ON RX ON synced associated ]
Error code: [ 00 ]
Signal quality: [ 1d ]
Current TX rate: [ 11 ]
Current SSID: [ SSID-TEST ]
Current AP name: [ SOME BRI342 ]
Current BSSID: [ 00:40:96:34:d3:eb ]
Beacon period: [ 100 ]
DTIM period: [ 2 ]
ATIM duration: [ 0 ]
HOP period: [ 200 ]
Channel set: [ 0 ]
Current channel: [ 7 ]
Hops to backbone: [ 1 ]
Total AP load: [ 0 ]
Our generated load: [ 0 ]
Accumulated ARL: [ 0 ]
su-2.05#
Any Ideas?!!
Regards,
Stoian Mishienv
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200110032243.BAA10360>