Date: Tue, 9 Feb 2021 18:28:34 +0100 From: Jesper Schmitz Mouridsen <jsm@FreeBSD.org> To: KIRIYAMA Kazuhiko <kiri@truefc.org> Cc: freebsd-arm@freebsd.org Subject: Re: Pinebook Pro display. Message-ID: <ec92dd19-851e-84de-f602-11607439cb6e@FreeBSD.org> In-Reply-To: <202102090747.1197ln92039484@kx.truefc.org> References: <3161cf79-0ec1-a3bc-801f-084d014ca92d@FreeBSD.org> <202102040606.11466HZB089892@kx.truefc.org> <9dcde0d6-ccd9-af13-dffa-5a80d221cff9@FreeBSD.org> <202102080652.1186qEGm050474@kx.truefc.org> <36699f90-fadd-86db-d6ee-62fadc0caf95@FreeBSD.org> <202102082257.118MverB010524@kx.truefc.org> <13e0a834-6c93-7d59-120f-59a5112fe365@FreeBSD.org> <202102090747.1197ln92039484@kx.truefc.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 09.02.2021 08.47, KIRIYAMA Kazuhiko wrote: > On Tue, 09 Feb 2021 16:26:52 +0900, > Jesper Schmitz Mouridsen wrote: >> >> On 08.02.2021 23.57, KIRIYAMA Kazuhiko wrote: >>> On Mon, 08 Feb 2021 17:20:38 +0900, >>> Jesper Schmitz Mouridsen wrote: >>>> On 08.02.2021 07.52, KIRIYAMA Kazuhiko wrote: >>>>> On Thu, 04 Feb 2021 22:24:05 +0900, >>>>> Jesper Schmitz Mouridsen wrote: >>>>>> On 04.02.2021 07.06, KIRIYAMA Kazuhiko wrote: >>>>>>> Hi, Jesper >>>>>>> >>>>>>> On Mon, 01 Feb 2021 00:49:24 +0900, >>>>>>> Jesper Schmitz Mouridsen wrote: >>>>>>>> Hi >>>>>>>> >>>>>>>> Just for information, I did some trial and error on u-boot for the >>>>>>>> >>>>>>>> Pinebook Pro in order to have display working without hacking >>>>>>>> >>>>>>>> the kernel. See https://github.com/jsm222/ports and >>>>>>> I've modified for u-boot-2020.10 [1] and remade >>>>>>> idbloader.img and u-boot.itb then install those and reboot. >>>>>>> But could not display console ;-( >>>>>> I sent you a PM with a patch. >>>>>> >>>>>> Also we did some duplicate work, see >>>>>> >>>>>> https://github.com/jsm222/u-boot-pinebookpro >>>>> I've tested above, it display until FreeBSD kernel boot but >>>>> blackout after. Namely display console >>>>> from `U-Boot 2020.10 (Feb 08 2021 -10:55:28 +0900)' >>>>> to `masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000' >>>>> and blackout after '---<<BOOT>>---' in the below log : >>>>> >>>>> root@kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0 >>>>> Connected >>>>> >>>>> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28) >>>>> Channel 0: LPDDR4, 50MHz >>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB >>>>> Channel 1: LPDDR4, 50MHz >>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB >>>>> 256B stride >>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1 >>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0 >>>>> Trying to boot from BOOTROM >>>>> Returning to boot ROM... >>>> Hi, you also need to copy the u-boot dtb files to the efi partition >>>> >>>> from /usr/ports/sysutils/u-boot-pinebookpro/work/u-boot-2020.10. >>>> >>>> sudo find . -name "*.dtb" -exec cp -iv {} /mnt/dtb/rockchip/ \; >>> I'd copied *.dtb to /mnt/dtb/rockchip as follows : >>> >>> root@kazu:~ # gpart show mmcsd0 >>> => 40 244277168 mmcsd0 GPT (116G) >>> 40 32728 - free - (16M) >>> 32768 102400 1 efi (50M) >>> 135168 16777216 2 freebsd-swap (8.0G) >>> 16912384 227364736 3 freebsd-ufs (108G) >>> 244277120 88 - free - (44K) >>> >>> root@kazu:~ # mount_msdosfs /dev/mmcsd0p1 /mnt >>> root@kazu:~ # ll /mnt/dtb/rockchip/ >>> total 1624 >>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 dt-spl.dtb* >>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 dt.dtb* >>> -rwxr-xr-x 1 root wheel 58854 Feb 8 20:02 rk3399-evb.dtb* >>> -rwxr-xr-x 1 root wheel 62750 Feb 8 20:02 rk3399-ficus.dtb* >>> -rwxr-xr-x 1 root wheel 63968 Feb 8 20:02 rk3399-firefly.dtb* >>> -rwxr-xr-x 1 root wheel 66411 Feb 8 20:02 rk3399-gru-bob.dtb* >>> -rwxr-xr-x 1 root wheel 63354 Feb 8 20:02 rk3399-khadas-edge-captain.dtb* >>> -rwxr-xr-x 1 root wheel 63346 Feb 8 20:02 rk3399-khadas-edge-v.dtb* >>> -rwxr-xr-x 1 root wheel 63291 Feb 8 20:02 rk3399-khadas-edge.dtb* >>> -rwxr-xr-x 1 root wheel 61094 Feb 8 20:02 rk3399-leez-p710.dtb* >>> -rwxr-xr-x 1 root wheel 63784 Feb 8 20:02 rk3399-nanopc-t4.dtb* >>> -rwxr-xr-x 1 root wheel 62897 Feb 8 20:02 rk3399-nanopi-m4-2gb.dtb* >>> -rwxr-xr-x 1 root wheel 62897 Feb 8 20:02 rk3399-nanopi-m4.dtb* >>> -rwxr-xr-x 1 root wheel 62753 Feb 8 20:02 rk3399-nanopi-neo4.dtb* >>> -rwxr-xr-x 1 root wheel 64009 Feb 8 20:02 rk3399-orangepi.dtb* >>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 rk3399-pinebook-pro.dtb* >>> -rwxr-xr-x 1 root wheel 56223 Feb 8 20:02 rk3399-puma-haikou.dtb* >>> -rwxr-xr-x 1 root wheel 65035 Feb 8 20:02 rk3399-roc-pc-mezzanine.dtb* >>> -rwxr-xr-x 1 root wheel 63850 Feb 8 20:02 rk3399-roc-pc.dtb* >>> -rwxr-xr-x 1 root wheel 55473 Feb 8 20:02 rk3399-rock-pi-4a.dtb* >>> -rwxr-xr-x 1 root wheel 62227 Feb 8 20:02 rk3399-rock-pi-4b.dtb* >>> -rwxr-xr-x 1 root wheel 62227 Feb 8 20:02 rk3399-rock-pi-4c.dtb* >>> -rwxr-xr-x 1 root wheel 62376 Feb 8 20:02 rk3399-rock960.dtb* >>> -rwxr-xr-x 1 root wheel 63651 Feb 8 20:02 rk3399-rockpro64.dtb* >>> -rwxr-xr-x 1 root wheel 59921 Feb 8 20:02 rk3399pro-rock-pi-n10.dtb* >>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 u-boot-spl.dtb* >>> -rwxr-xr-x 1 root wheel 11861 Feb 8 20:02 u-boot-tpl.dtb* >>> -rwxr-xr-x 1 root wheel 67273 Feb 8 20:02 u-boot.dtb* >>> root@kazu:~ # >>> >>> But does not display console as well ;-) Boot log is as >>> follows : >> Hi, >> >> What is your output of >> >> sysctl hw.clock.aclk_vop1 >> >> my output is: >> >> hw.clock.aclk_vop1.enable_cnt: 0 >> hw.clock.aclk_vop1.childrens: >> hw.clock.aclk_vop1.parents: aclk_vop1_pre >> hw.clock.aclk_vop1.parent: aclk_vop1_pre >> hw.clock.aclk_vop1.frequency: 594000000 >> and sysctl hw.clock.cpll >> >> my output is: >> >> hw.clock.cpll.enable_cnt: 16 >> hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c >> aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c clk_crypto0_c clk_crypto1_c >> clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c >> clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src >> clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c >> aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre >> clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c >> clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace >> cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src >> cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src >> cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c clk_sdmmc_c >> hw.clock.cpll.parents: xin24m xin32k >> hw.clock.cpll.parent: xin24m >> hw.clock.cpll.frequency: 800000000 > My outputs are : > > root@kazu:~ # sysctl hw.clock.aclk_vop1 > hw.clock.aclk_vop1.enable_cnt: 0 > hw.clock.aclk_vop1.childrens: > hw.clock.aclk_vop1.parents: aclk_vop1_pre > hw.clock.aclk_vop1.parent: aclk_vop1_pre > hw.clock.aclk_vop1.frequency: 594000000 > root@kazu:~ # sysctl hw.clock.cpll > hw.clock.cpll.enable_cnt: 14 > hw.clock.cpll.childrens: pclk_ddr_c aclk_vcodec_pre_c aclk_vdu_pre_c aclk_iep_pre_c aclk_rga_pre_c clk_rga_core_c hclk_sd_c clk_crypto0_c clk_crypto1_c clk_i2s0_div_c clk_i2s1_div_c clk_i2s2_div_c clk_spdif_rec_dptx_c clk_spdif_div_c clk_uart_src clk_uart0_src clk_testout2_pll_src clk_testout1_pll_src aclk_hdcp_c aclk_vio_c pclk_edp_c aclk_isp0_c aclk_isp1_c aclk_gic_pre_c clk_cifout_src_c clk_spi5_c clk_test_pre clk_spi0_c clk_spi4_c clk_spi2_c clk_i2c5_c clk_i2c1_c clk_i2c6_c clk_i2c2_c clk_i2c7_c clk_i2c3_c cpll_cs cpll_cci_trace cpll_aclk_cci_src cpll_aclk_perihp_src cpll_aclk_emmc_src cpll_aclk_gmac_src cpll_fclk_cm0s_src cpll_aclk_perilp0_src cpll_hclk_perilp1_src clk_uphy0_tcpdcore_c clk_uphy1_tcpdcore_c > hw.clock.cpll.parents: xin24m xin32k > hw.clock.cpll.parent: xin24m > hw.clock.cpll.frequency: 800000000 > root@kazu:~ # > > Regards > > --- > Kazuhiko Kiriyama <kiri@truefc.org> > Hi, Can you try [1] on a sd card with uart disabled and emmc blocked? It works for me. I have not tested it with uart enabled.. [1] http://build.schmitz.computer/build/FreeBSD-13.0-ALPHA2-arm64-aarch64-ROCKPRO64-pbp-mod2-20210122-02611ef8ee9-256201.img.xz /Jesper. >> /Jesper >> >> >>> root@kazu:/home/kiri/bootimg # cu -s 1500000 -l /dev/cuaU0 >>> Connected >>> >>> U-Boot TPL 2020.10 (Feb 08 2021 - 10:55:28) >>> Channel 0: LPDDR4, 50MHz >>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB >>> Channel 1: LPDDR4, 50MHz >>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB >>> 256B stride >>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1 >>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0 >>> Trying to boot from BOOTROM >>> Returning to boot ROM... >>> >>> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900) >>> Trying to boot from MMC2 >>> >>> >>> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900) >>> Consoles: EFI console >>> Reading loader env vars from /efi/freebsd/loader.env >>> Setting currdev to disk0p1: >>> FreeBSD/arm64 EFI loader, Revision 1.1 >>> (Fri Jan 8 12:04:36 JST 2021 admin@lmainkx) >>> >>> Command line arguments: loader.efi >>> Image base: 0xf3df0000 >>> EFI version: 2.80 >>> EFI Firmware: Das U-Boot (rev 8224.4096) >>> Console: comconsole (0) >>> Load Path: /efi\boot\bootaa64.efi >>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) >>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) >>> Setting currdev to disk0p1: >>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000) >>> Setting currdev to disk0p2: >>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80) >>> Setting currdev to disk0p3: >>> Loading /boot/defaults/loader.conf >>> Loading /boot/defaults/loader.conf >>> Loading /boot/device.hints >>> Loading /boot/loader.conf >>> Loading /boot/loader.conf.local >>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_| ! > |_| ! >>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop >>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop >>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop >>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop >>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop >>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop >>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop >>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop >>> [25;0HLoading kernel... >>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e] >>> Loading configured modules... >>> /etc/hostid size=0x25 >>> /boot/entropy size=0x1000 >>> Using DTB provided by EFI at 0x80ec000. >>> EFI framebuffer information: >>> addr, size 0xf7800000, 0x3f4800 >>> dimensions 1920 x 1080 >>> stride 1920 >>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000 >>> ---<<BOOT>>--- >>> KDB: debugger backends: ddb >>> KDB: current backend: ddb >>> Copyright (c) 1992-2020 The FreeBSD Project. >>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >>> The Regents of the University of California. All rights reserved. >>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 >>> admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 >>> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) >>> WARNING: WITNESS option enabled, expect reduced performance. >>> VT(efifb): resolution 1920x1080 >>> module firmware already present! >>> real memory = 4158373888 (3965 MB) >>> avail memory = 4025094144 (3838 MB) >>> Starting CPU 1 (1) >>> Starting CPU 2 (2) >>> Starting CPU 3 (3) >>> Starting CPU 4 (100) >>> Starting CPU 5 (101) >>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs >>> random: unblocking device. >>> random: entropy device external interface >>> MAP f3f16000 mode 2 pages 4 >>> MAP f3f1b000 mode 2 pages 4 >>> MAP f6f40000 mode 2 pages 16 >>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. >>> kbd0 at kbdmux0 >>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. >>> ofwbus0: <Open Firmware Device Tree> >>> clk_fixed0: <Fixed clock> on ofwbus0 >>> simplebus0: <Flattened device tree simple bus> on ofwbus0 >>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0 >>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0 >>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0 >>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0 >>> regfix0: <Fixed Regulator> on ofwbus0 >>> regfix1: <Fixed Regulator> on ofwbus0 >>> regfix2: <Fixed Regulator> on ofwbus0 >>> regfix3: <Fixed Regulator> on ofwbus0 >>> regfix4: <Fixed Regulator> on ofwbus0 >>> regfix5: <Fixed Regulator> on ofwbus0 >>> regfix6: <Fixed Regulator> on ofwbus0 >>> regfix7: <Fixed Regulator> on ofwbus0 >>> regfix8: <Fixed Regulator> on ofwbus0 >>> regfix9: <Fixed Regulator> on ofwbus0 >>> regfix10: <Fixed Regulator> on ofwbus0 >>> regfix11: <Fixed Regulator> on ofwbus0 >>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0 >>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0 >>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0 >>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0 >>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 >>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0 >>> gpiobus0: <OFW GPIO bus> on gpio0 >>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0 >>> gpiobus1: <OFW GPIO bus> on gpio1 >>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0 >>> gpiobus2: <OFW GPIO bus> on gpio2 >>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0 >>> gpiobus3: <OFW GPIO bus> on gpio3 >>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0 >>> gpiobus4: <OFW GPIO bus> on gpio4 >>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 >>> iicbus0: <OFW I2C bus> on rk_i2c0 >>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 >>> iicbus1: <OFW I2C bus> on rk_i2c1 >>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 >>> iicbus2: <OFW I2C bus> on rk_i2c2 >>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 >>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 >>> iicbus3: <OFW I2C bus> on rk_i2c3 >>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 >>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 >>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 >>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 >>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0 >>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0 >>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0 >>> cpulist0: <Open Firmware CPU Group> on ofwbus0 >>> cpu0: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt0: <Generic cpufreq driver> on cpu0 >>> cpu1: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt1: <Generic cpufreq driver> on cpu1 >>> cpu2: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt2: <Generic cpufreq driver> on cpu2 >>> cpu3: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt3: <Generic cpufreq driver> on cpu3 >>> cpu4: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt4: <Generic cpufreq driver> on cpu4 >>> cpu5: <Open Firmware CPU> on cpulist0 >>> cpufreq_dt5: <Generic cpufreq driver> on cpu5 >>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0 >>> pcib0: Gen1 link training timeouted: 0x00080001. >>> pci0: <PCI bus> on pcib0 >>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0 >>> pcib0: failed to reserve resource for pcib1 >>> pcib1: failed to allocate initial memory window: 0-0xfffff >>> pci1: <PCI bus> on pcib1 >>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0 >>> rockchip_dwmmc0: Hardware version ID is 270a >>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 >>> rockchip_dwmmc1: Hardware version ID is 270a >>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0 >>> rk_emmcphy0: got emmcclk clock >>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. >>> sdhci_fdt0: 1 slot(s) allocated >>> mmc0: <MMC/SD bus> on sdhci_fdt0 >>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0 >>> usbus0: EHCI version 1.0 >>> usbus0 on ehci0 >>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0 >>> usbus1 on ohci0 >>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0 >>> usbus2: EHCI version 1.0 >>> usbus2 on ehci1 >>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0 >>> usbus3 on ohci1 >>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 >>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30 >>> xhci0: 64 bytes context size, 32-bit DMA >>> usbus4: trying to attach >>> usbus4 on xhci0 >>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 >>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31 >>> xhci1: 64 bytes context size, 32-bit DMA >>> usbus5: trying to attach >>> usbus5 on xhci1 >>> iicbus0: <unknown card> at addr 0x22 >>> iic0: <I2C generic I/O> on iicbus0 >>> iic1: <I2C generic I/O> on iicbus1 >>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0 >>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0 >>> uart1: console (1500000,n,8,1) >>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 >>> spibus0: <OFW SPI bus> on spi0 >>> spibus0: <unknown card> at cs 0 mode 0 >>> iicbus2: <unknown card> at addr 0x82 >>> iic2: <I2C generic I/O> on iicbus2 >>> iicbus3: <unknown card> at addr 0x44 >>> iic3: <I2C generic I/O> on iicbus3 >>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 >>> pwmbus0: <OFW PWM bus> on pwm0 >>> pwmc0: <PWM Control> channel 0 on pwmbus0 >>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 >>> pwmbus1: <OFW PWM bus> on pwm1 >>> pwmc1: <PWM Control> channel 0 on pwmbus1 >>> gpioc0: <GPIO controller> on gpio0 >>> gpioc1: <GPIO controller> on gpio1 >>> gpioc2: <GPIO controller> on gpio2 >>> gpioc3: <GPIO controller> on gpio3 >>> gpioc4: <GPIO controller> on gpio4 >>> gpioled0: <GPIO LEDs> on ofwbus0 >>> cryptosoft0: <software crypto> >>> Timecounters tick every 1.000 msec >>> usbus0: 480Mbps High Speed USB v2.0 >>> usbus1: 12Mbps Full Speed USB v1.0 >>> usbus2: 480Mbps High Speed USB v2.0 >>> usbus3: 12Mbps Full Speed USB v1.0 >>> usbus4: 5.0Gbps Super Speed USB v3.0 >>> usbus5: 5.0Gbps Super Speed USB v3.0 >>> ugen3.1: <Generic OHCI root HUB> at usbus3 >>> uhub0 on usbus3 >>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 >>> ugen2.1: <Generic EHCI root HUB> at usbus2 >>> uhub1 on usbus2 >>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 >>> ugen1.1: <Generic OHCI root HUB> at usbus1 >>> uhub2 on usbus1 >>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >>> ugen0.1: <Generic EHCI root HUB> at usbus0 >>> uhub3 on usbus0 >>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >>> ugen5.1: <Synopsys XHCI root HUB> at usbus5 >>> uhub4 on usbus5 >>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 >>> ugen4.1: <Synopsys XHCI root HUB> at usbus4 >>> uhub5 on usbus4 >>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 >>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block >>> mmcsd0boot0: 4MB partition 1 at mmcsd0 >>> mmcsd0boot1: 4MB partition 2 at mmcsd0 >>> mmcsd0rpmb: 17MB partition 3 at mmcsd0 >>> Release APs...done >>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> >>> Instruction Set Attributes 1 = <> >>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> >>> Processor Features 1 = <> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>> Memory Model Features 1 = <8bit VMID> >>> Memory Model Features 2 = <32bit CCIDX,48bit VA> >>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]... >>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> >>> Debug Features 1 = <> >>> Auxiliary Features 0 = <> >>> Auxiliary Features 1 = <> >>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 >>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> >>> CPU 5: ARM Cortex- Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> >>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> >>> WARNING: WITNESS option enabled, expect reduced performance. >>> Unresolved linked clock found: clkin_gmac >>> uhub0: 1 port with 1 removable, self powered >>> uhub2: 1 port with 1 removable, self powered >>> uhub5: 2 ports with 2 removable, self powered >>> Warning: no time-of-day clock registered, uhub4: 2 ports with 2 removable, self powered >>> system time will not be set accurately >>> uhub1: 1 port with 1 removable, self powered >>> uhub3: 1 port with 1 removable, self powered >>> Setting hostuuid: 31323634-3737-6236-6162-336630376339. >>> Setting hostid: 0x5d4b60f9. >>> Starting file system checks: >>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS >>> /dev/mmcsd0p3: clean, 27264084 free (348 frags, 3407967 blocks, 0.0% fragmentation) >>> lock order reversal: >>> 1st 0xffffa00062d92810 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724 >>> 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918 >>> lock order devfs -> ufs established at: >>> #0 0xffff000000569234 at witness_checkorder+0x448 >>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8 >>> #2 0xffff00000075ad38 at ffs_lock+0x64 >>> #3 0xffff0000005ed57c at _vn_lock+0x54 >>> #4 0xffff0000005ce630 at vfs_domount+0xdf8 >>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4 >>> #6 0xffff0000005d0e78 at kernel_mount+0x4c >>> #7 0xffff0000005d3564 at parse_mount+0x49c >>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc >>> #9 0xffff00000048dc68 at start_init+0x24 >>> #10 0xffff0000004b7474 at fork_exit+0x7c >>> lock order ufs -> devfs attempted at: >>> #0 0xffff000000569a40 at witness_checkorder+0xc54 >>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50 >>> #2 0xffff0000005ed57c at _vn_lock+0x54 >>> #3 0xffff0000005d77d8 at vget_finish+0x4c >>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0 >>> #5 0xffff0000003b12c0 at devfs_root+0x44 >>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154 >>> #7 0xffff0000005d89b0 at vflush+0x5c >>> #8 0xffff0000003b11c8 at devfs_unmount+0x34 >>> #9 0xffff0000005cf4c4 at dounmount+0x43c >>> #10 0xffff0000005cf040 at kern_unmount+0x2d8 >>> #11 0xffff000000812d0c at do_el0_sync+0x454 >>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90 >>> Mounting local filesystems:. >>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat >>> Setting hostname: kazu.tfc. >>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 >>> ukbd0 on uhub2 >>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1 >>> kbd1 at ukbd0 >>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED >>> Feeding entropy: . >>> lo0: link state changed to UP >>> Starting Network: lo0. >>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> >>> inet6 ::1 prefixlen 128 >>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 >>> inet 127.0.0.1 netmask 0xff000000 >>> groups: lo >>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >>> Starting devd. >>> Autoloading module: mx25l.ko >>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K >>> Autoloading module: pwm_backlight.ko >>> link_elf: symbol backlight_get_info_desc undefined >>> kldload: can't load pwm_backlight.ko: No such file or directory >>> Autoloading module: uhid.ko >>> Autoloading module: wmt.ko >>> add host 127.0.0.1: gateway lo0 fib 0: route already in table >>> route: writing to routing socket: Network is unreachable >>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable >>> add host ::1: gateway lo0 fib 0: route already in table >>> add net fe80::: gateway ::1 >>> add net ff02::: gateway ::1 >>> add net ::ffff:0.0.0.0: gateway ::1 >>> add net ::0.0.0.0: gateway ::1 >>> Updating /var/run/os-release done. >>> Creating and/or trimming log files. >>> Updating motd:. >>> Clearing /tmp (X related). >>> Starting syslogd. >>> No core dumps found. >>> Mounting late filesystems:. >>> Security policy loaded: MAC/ntpd (mac_ntpd) >>> Starting ntpd. >>> Feb 9 07:23:09 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 43 days ago >>> Performing sanity check on sshd configuration. >>> Starting sshd. >>> Starting cron. >>> Starting sendmail. >>> Starting sendmail_msp_queue. >>> Feb 9 07:23:10 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8) >>> Configuring vt: blanktime screensaverkldload: can't load logo_saver: No such file or directory >>> /etc/rc: WARNING: Unable to load kernel module logo_saver >>> . >>> Starting background file system checks in 60 seconds. >>> >>> Tue Feb 9 07:23:11 JST 2021 >>> >>> FreeBSD/arm64 (kazu.tfc) (ttyu1) >>> >>> login: >>> >>>> after make. Otherwise the ACLK_VOP1 goes to 800000000, and >>>> >>>> we lose display. >>>> >>>> /Jesper >>>> >>>>> U-Boot SPL 2020.10 (Feb 08 2021 - 10:55:28 +0900) >>>>> Trying to boot from MMC2 >>>>> >>>>> >>>>> U-Boot 2020.10 (Feb 08 2021 - 10:55:28 +0900) >>>>> Consoles: EFI console >>>>> Reading loader env vars from /efi/freebsd/loader.env >>>>> Setting currdev to disk0p1: >>>>> FreeBSD/arm64 EFI loader, Revision 1.1 >>>>> (Fri Jan 8 12:04:36 JST 2021 admin@lmainkx) >>>>> >>>>> Command line arguments: loader.efi >>>>> Image base: 0xf3df0000 >>>>> EFI version: 2.80 >>>>> EFI Firmware: Das U-Boot (rev 8224.4096) >>>>> Console: comconsole (0) >>>>> Load Path: /efi\boot\bootaa64.efi >>>>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) >>>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x8000,0x19000) >>>>> Setting currdev to disk0p1: >>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x21000,0x1000000) >>>>> Setting currdev to disk0p2: >>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,1e4d25d1-69d4-11eb-8cb0-7b17e459e283,0x1021000,0xd8d4f80) >>>>> Setting currdev to disk0p3: >>>>> Loading /boot/defaults/loader.conf >>>>> Loading /boot/defaults/loader.conf >>>>> Loading /boot/device.hints >>>>> Loading /boot/loader.conf >>>>> Loading /boot/loader.conf.local >>>>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_| ! > ! >>> |_| ! >>>>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop >>>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop >>>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop >>>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop >>>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop >>>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop >>>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop >>>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop >>>>> [25;0HLoading kernel... >>>>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e] >>>>> Loading configured modules... >>>>> /etc/hostid size=0x25 >>>>> /boot/entropy size=0x1000 >>>>> Using DTB provided by EFI at 0x80ec000. >>>>> EFI framebuffer information: >>>>> addr, size 0xf7800000, 0x3f4800 >>>>> dimensions 1920 x 1080 >>>>> stride 1920 >>>>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000 >>>>> ---<<BOOT>>--- >>>>> KDB: debugger backends: ddb >>>>> KDB: current backend: ddb >>>>> Copyright (c) 1992-2020 The FreeBSD Project. >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >>>>> The Regents of the University of California. All rights reserved. >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 >>>>> admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 >>>>> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) >>>>> WARNING: WITNESS option enabled, expect reduced performance. >>>>> VT(efifb): resolution 1920x1080 >>>>> module firmware already present! >>>>> real memory = 4158373888 (3965 MB) >>>>> avail memory = 4025094144 (3838 MB) >>>>> Starting CPU 1 (1) >>>>> Starting CPU 2 (2) >>>>> Starting CPU 3 (3) >>>>> Starting CPU 4 (100) >>>>> Starting CPU 5 (101) >>>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs >>>>> random: unblocking device. >>>>> random: entropy device external interface >>>>> MAP f3f16000 mode 2 pages 4 >>>>> MAP f3f1b000 mode 2 pages 4 >>>>> MAP f6f40000 mode 2 pages 16 >>>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. >>>>> kbd0 at kbdmux0 >>>>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. >>>>> ofwbus0: <Open Firmware Device Tree> >>>>> clk_fixed0: <Fixed clock> on ofwbus0 >>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0 >>>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0 >>>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0 >>>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0 >>>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0 >>>>> regfix0: <Fixed Regulator> on ofwbus0 >>>>> regfix1: <Fixed Regulator> on ofwbus0 >>>>> regfix2: <Fixed Regulator> on ofwbus0 >>>>> regfix3: <Fixed Regulator> on ofwbus0 >>>>> regfix4: <Fixed Regulator> on ofwbus0 >>>>> regfix5: <Fixed Regulator> on ofwbus0 >>>>> regfix6: <Fixed Regulator> on ofwbus0 >>>>> regfix7: <Fixed Regulator> on ofwbus0 >>>>> regfix8: <Fixed Regulator> on ofwbus0 >>>>> regfix9: <Fixed Regulator> on ofwbus0 >>>>> regfix10: <Fixed Regulator> on ofwbus0 >>>>> regfix11: <Fixed Regulator> on ofwbus0 >>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0 >>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0 >>>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0 >>>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0 >>>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 >>>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0 >>>>> gpiobus0: <OFW GPIO bus> on gpio0 >>>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0 >>>>> gpiobus1: <OFW GPIO bus> on gpio1 >>>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0 >>>>> gpiobus2: <OFW GPIO bus> on gpio2 >>>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0 >>>>> gpiobus3: <OFW GPIO bus> on gpio3 >>>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0 >>>>> gpiobus4: <OFW GPIO bus> on gpio4 >>>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 >>>>> iicbus0: <OFW I2C bus> on rk_i2c0 >>>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 >>>>> iicbus1: <OFW I2C bus> on rk_i2c1 >>>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 >>>>> iicbus2: <OFW I2C bus> on rk_i2c2 >>>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 >>>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 >>>>> iicbus3: <OFW I2C bus> on rk_i2c3 >>>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 >>>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 >>>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 >>>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 >>>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0 >>>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0 >>>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0 >>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0 >>>>> cpu0: <Open Firmware CPU> on cpulist0 >>>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0 >>>>> cpu1: <Open Firmware CPU> on cpulist0 >>>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1 >>>>> cpu2: <Open Firmware CPU> on cpulist0 >>>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2 >>>>> cpu3: <Open Firmware CPU> on cpulist0 >>>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3 >>>>> cpu4: <Open Firmware CPU> on cpulist0 >>>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4 >>>>> cpu5: <Open Firmware CPU> on cpulist0 >>>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5 >>>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0 >>>>> pcib0: Gen1 link training timeouted: 0x00080001. >>>>> pci0: <PCI bus> on pcib0 >>>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0 >>>>> pcib0: failed to reserve resource for pcib1 >>>>> pcib1: failed to allocate initial memory window: 0-0xfffff >>>>> pci1: <PCI bus> on pcib1 >>>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0 >>>>> rockchip_dwmmc0: Hardware version ID is 270a >>>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 >>>>> rockchip_dwmmc1: Hardware version ID is 270a >>>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0 >>>>> rk_emmcphy0: got emmcclk clock >>>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. >>>>> sdhci_fdt0: 1 slot(s) allocated >>>>> mmc0: <MMC/SD bus> on sdhci_fdt0 >>>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0 >>>>> usbus0: EHCI version 1.0 >>>>> usbus0 on ehci0 >>>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0 >>>>> usbus1 on ohci0 >>>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0 >>>>> usbus2: EHCI version 1.0 >>>>> usbus2 on ehci1 >>>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0 >>>>> usbus3 on ohci1 >>>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 >>>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30 >>>>> xhci0: 64 bytes context size, 32-bit DMA >>>>> usbus4: trying to attach >>>>> usbus4 on xhci0 >>>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 >>>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31 >>>>> xhci1: 64 bytes context size, 32-bit DMA >>>>> usbus5: trying to attach >>>>> usbus5 on xhci1 >>>>> iicbus0: <unknown card> at addr 0x22 >>>>> iic0: <I2C generic I/O> on iicbus0 >>>>> iic1: <I2C generic I/O> on iicbus1 >>>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0 >>>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0 >>>>> uart1: console (1500000,n,8,1) >>>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 >>>>> spibus0: <OFW SPI bus> on spi0 >>>>> spibus0: <unknown card> at cs 0 mode 0 >>>>> iicbus2: <unknown card> at addr 0x82 >>>>> iic2: <I2C generic I/O> on iicbus2 >>>>> iicbus3: <unknown card> at addr 0x44 >>>>> iic3: <I2C generic I/O> on iicbus3 >>>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 >>>>> pwmbus0: <OFW PWM bus> on pwm0 >>>>> pwmc0: <PWM Control> channel 0 on pwmbus0 >>>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 >>>>> pwmbus1: <OFW PWM bus> on pwm1 >>>>> pwmc1: <PWM Control> channel 0 on pwmbus1 >>>>> gpioc0: <GPIO controller> on gpio0 >>>>> gpioc1: <GPIO controller> on gpio1 >>>>> gpioc2: <GPIO controller> on gpio2 >>>>> gpioc3: <GPIO controller> on gpio3 >>>>> gpioc4: <GPIO controller> on gpio4 >>>>> gpioled0: <GPIO LEDs> on ofwbus0 >>>>> cryptosoft0: <software crypto> >>>>> Timecounters tick every 1.000 msec >>>>> usbus0: 480Mbps High Speed USB v2.0 >>>>> usbus1: 12Mbps Full Speed USB v1.0 >>>>> usbus2: 480Mbps High Speed USB v2.0 >>>>> usbus3: 12Mbps Full Speed USB v1.0 >>>>> usbus4: 5.0Gbps Super Speed USB v3.0 >>>>> usbus5: 5.0Gbps Super Speed USB v3.0 >>>>> ugen3.1: <Generic OHCI root HUB> at usbus3 >>>>> uhub0 on usbus3 >>>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 >>>>> ugen2.1: <Generic EHCI root HUB> at usbus2 >>>>> uhub1 on usbus2 >>>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 >>>>> ugen1.1: <Generic OHCI root HUB> at usbus1 >>>>> uhub2 on usbus1 >>>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >>>>> ugen0.1: <Generic EHCI root HUB> at usbus0 >>>>> uhub3 on usbus0 >>>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >>>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5 >>>>> uhub4 on usbus5 >>>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 >>>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4 >>>>> uhub5 on usbus4 >>>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 >>>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block >>>>> mmcsd0boot0: 4MB partition 1 at mmcsd0 >>>>> mmcsd0boot1: 4MB partition 2 at mmcsd0 >>>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0 >>>>> Release APs...done >>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> >>>>> Instruction Set Attributes 1 = <> >>>>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> >>>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]... >>>>> Processor Features 1 = <> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>>>> Memory Model Features 1 = <8bit VMID> >>>>> Memory Model Features 2 = <32bit CCIDX,48bit VA> >>>>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> >>>>> Debug Features 1 = <> >>>>> Auxiliary Features 0 = <> >>>>> Auxiliary Features 1 = <> >>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>>>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>>>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>>>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> >>>>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1 >>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> >>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> >>>>> WARNING: WITNESS option enabled, expect reduced performance. >>>>> Unresolved linked clock found: clkin_gmac >>>>> uhub0: 1 port with 1 removable, self powered >>>>> uhub2: 1 port with 1 removable, self powered >>>>> uhub5: 2 ports with 2 removable, self powered >>>>> uhub4: 2 ports with 2 removable, self powered >>>>> Warning: no time-of-day clock registered, system time will not be set accurately >>>>> uhub1: 1 port with 1 removable, self powered >>>>> uhub3: 1 port with 1 removable, self powered >>>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339. >>>>> Setting hostid: 0x5d4b60f9. >>>>> Starting file system checks: >>>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS >>>>> /dev/mmcsd0p3: clean, 27264803 free (363 frags, 3408055 blocks, 0.0% fragmentation) >>>>> lock order reversal: >>>>> 1st 0xffffa00062c99440 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724 >>>>> 2nd 0xffffa00062c99dc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918 >>>>> lock order devfs -> ufs established at: >>>>> #0 0xffff000000569234 at witness_checkorder+0x448 >>>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8 >>>>> #2 0xffff00000075ad38 at ffs_lock+0x64 >>>>> #3 0xffff0000005ed57c at _vn_lock+0x54 >>>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8 >>>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4 >>>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c >>>>> #7 0xffff0000005d3564 at parse_mount+0x49c >>>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc >>>>> #9 0xffff00000048dc68 at start_init+0x24 >>>>> #10 0xffff0000004b7474 at fork_exit+0x7c >>>>> lock order ufs -> devfs attempted at: >>>>> #0 0xffff000000569a40 at witness_checkorder+0xc54 >>>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50 >>>>> #2 0xffff0000005ed57c at _vn_lock+0x54 >>>>> #3 0xffff0000005d77d8 at vget_finish+0x4c >>>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0 >>>>> #5 0xffff0000003b12c0 at devfs_root+0x44 >>>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154 >>>>> #7 0xffff0000005d89b0 at vflush+0x5c >>>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34 >>>>> #9 0xffff0000005cf4c4 at dounmount+0x43c >>>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8 >>>>> #11 0xffff000000812d0c at do_el0_sync+0x454 >>>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90 >>>>> Mounting local filesystems:. >>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat >>>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 >>>>> ukbd0 on uhub2 >>>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1 >>>>> kbd1 at ukbd0 >>>>> Setting hostname: kazu.tfc. >>>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED >>>>> Feeding entropy: . >>>>> lo0: link state changed to UP >>>>> Starting Network: lo0. >>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >>>>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> >>>>> inet6 ::1 prefixlen 128 >>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 >>>>> inet 127.0.0.1 netmask 0xff000000 >>>>> groups: lo >>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >>>>> Starting devd. >>>>> Autoloading module: mx25l.ko >>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >>>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K >>>>> Autoloading module: pwm_backlight.ko >>>>> link_elf: symbol backlight_get_info_desc undefined >>>>> kldload: can't load pwm_backlight.ko: No such file or directory >>>>> Autoloading module: uhid.ko >>>>> Autoloading module: wmt.ko >>>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table >>>>> route: writing to routing socket: Network is unreachable >>>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable >>>>> add host ::1: gateway lo0 fib 0: route already in table >>>>> add net fe80::: gateway ::1 >>>>> add net ff02::: gateway ::1 >>>>> add net ::ffff:0.0.0.0: gateway ::1 >>>>> add net ::0.0.0.0: gateway ::1 >>>>> Updating /var/run/os-release done. >>>>> Creating and/or trimming log files. >>>>> Updating motd:. >>>>> Clearing /tmp (X related). >>>>> Starting syslogd. >>>>> No core dumps found. >>>>> Mounting late filesystems:. >>>>> Security policy loaded: MAC/ntpd (mac_ntpd) >>>>> Starting ntpd. >>>>> Feb 8 15:24:40 kazu ntpd[1000]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 43 days ago >>>>> Performing sanity check on sshd configuration. >>>>> Starting sshd. >>>>> Starting cron. >>>>> Starting sendmail. >>>>> Starting sendmail_msp_queue. >>>>> Feb 8 15:24:41 kazu ntpd[1000]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8) >>>>> Configuring vt: blanktime screensaverkldload: can't load logo_saver: No such file or directory >>>>> /etc/rc: WARNING: Unable to load kernel module logo_saver >>>>> . >>>>> Starting background file system checks in 60 seconds. >>>>> >>>>> Mon Feb 8 15:24:42 JST 2021 >>>>> >>>>> FreeBSD/arm64 (kazu.tfc) (ttyu1) >>>>> >>>>> login: >>>>> >>>>> >>>>>> regards >>>>>> >>>>>> /Jesper >>>>>> >>>>>>> root@kazu:~ # cu -s 1500000 -l /dev/cuaU0 >>>>>>> Connected >>>>>>> >>>>>>> U-Boot TPL 2020.10 (Feb 03 2021 - 11:13:01) >>>>>>> Channel 0: LPDDR4, 50MHz >>>>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB >>>>>>> Channel 1: LPDDR4, 50MHz >>>>>>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB >>>>>>> 256B stride >>>>>>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1 >>>>>>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0 >>>>>>> Trying to boot from BOOTROM >>>>>>> Returning to boot ROM... >>>>>>> >>>>>>> U-Boot SPL 2020.10 (Feb 03 2021 - 11:13:01 +0900) >>>>>>> Trying to boot from MMC2 >>>>>>> >>>>>>> >>>>>>> U-Boot 2020.10 (Feb 03 2021 - 11:13:01 +0900) >>>>>>> >>>>>>> SoC: Rockchip rk3399 >>>>>>> Reset cause: POR >>>>>>> Model: Pine64 Pinebook Pro >>>>>>> DRAM: 3.9 GiB >>>>>>> PMIC: RK808 >>>>>>> MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0 >>>>>>> Loading Environment from SPIFlash... Invalid bus 0 (err=-19) >>>>>>> *** Warning - spi_flash_probe_bus_cs() failed, using default environment >>>>>>> >>>>>>> In: serial >>>>>>> Out: serial >>>>>>> Err: serial >>>>>>> Model: Pine64 Pinebook Pro >>>>>>> Net: No ethernet found. >>>>>>> Failed to load 'splash.bmp' >>>>>>> Card did not respond to voltage select! >>>>>>> Hit any key to stop autoboot: 0 >>>>>>> Consoles: EFI console >>>>>>> Read loader env vars from /efi/freebsd/loader.env >>>>>>> Setting currdev to disk0p1: >>>>>>> FreeBSD/arm64 EFI loader, Revision 1.1 >>>>>>> (Fri Jan 8 12:04:36 JST 2021 admin@lmainkx) >>>>>>> >>>>>>> Command line arguments: loader.efi >>>>>>> Image base: 0xf3dee000 >>>>>>> EFI version: 2.80 >>>>>>> EFI Firmware: Das U-Boot (rev 8224.4096) >>>>>>> Console: comconsole (0) >>>>>>> Load Path: /efi\boot\bootaa64.efi >>>>>>> Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000) >>>>>>> Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(1,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x8000,0x19000) >>>>>>> Setting currdev to disk0p1: >>>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(2,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x21000,0x1000000) >>>>>>> Setting currdev to disk0p2: >>>>>>> Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(0)/eMMC(0)/HD(3,GPT,4d89c0a3-65e7-11eb-b928-7ba121e2a6c9,0x1021000,0xd8d4f80) >>>>>>> Setting currdev to disk0p3: >>>>>>> Loading /boot/defaults/loader.conf >>>>>>> Loading /boot/defaults/loader.conf >>>>>>> Loading /boot/device.hints >>>>>>> Loading /boot/loader.conf >>>>>>> Loading /boot/loader.conf.local >>>>>>> c[H[J[8;48H [31m``` [31;1m`[31m[9;48H s` `.....---...[31;1m....--.``` -/[31m[10;48H +o .--` [31;1m/y:` +.[31m[11;48H yo`:. [31;1m:o `+-[31m[12;48H y/ [31;1m-/` -o/[31m[13;48H .- [31;1m::/sy+:.[31m[14;48H / [31;1m`-- /[31m[15;48H `: [31;1m:`[31m[16;48H `: [31;1m:`[31m[17;48H / [31;1m/[31m[18;48H .- [31;1m-.[31m[19;48H -- [31;1m-.[31m[20;48H `:` [31;1m`:`[21;48H [31;1m.-- `--.[22;48H .---.....----.[m[1;2H ______ ____ _____ _____ [2;2H | ____| | _ \ / ____| __ \ [3;2H | |___ _ __ ___ ___ | |_) | (___ | | | |[4;2H | ___| '__/ _ \/ _ \| _ < \___ \| | | |[5;2H | | | | | __/ __/| |_) |____) | |__| |[6;2H | | | | | | || | | |[7;2H |_! > | ! >>> ! >>>>> |_| ! >>>>>>> \___|\___||____/|_____/|_____/ [9;2H+[22;2H+[9;44H+[22;44H+[9;3H-----------------------------------------[22;3H-----------------------------------------[10;2H|[10;44H|[11;2H|[11;44H|[12;2H|[12;44H|[13;2H|[13;44H|[14;2H|[14;44H|[15;2H|[15;44H|[16;2H|[16;44H|[17;2H|[17;44H|[18;2H|[18;44H|[19;2H|[19;44H|[20;2H|[20;44H|[21;2H|[21;44H|[9;14HWelcome to FreeBSD[11;5H1. [1mB[22moot Multi user [1m[Enter][22m[12;5H2. Boot [1mS[22mingle user[13;5H3. [1mEsc[22mape to loader prompt[14;5H4. [1mR[22meboot[15;5H5. [1mC[22mons: Video[16;5H[17;5HOptions:[18;5H6. [1mK[22mernel: default/[32mkernel[39m (1 of 1)[19;5H7. Boot [1mO[22mptions[25;0H[23;4HAutoboot in 10 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 9 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 8 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 7 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 6 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 5 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 4 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 3 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 2 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 1 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0H[23;4HAutoboot in 0 seconds, hit [Enter] to boot or any other key to stop >>>>>>> [25;0HLoading kernel... >>>>>>> /boot/kernel/kernel text=0x2a8 text=0x87de9c text=0x1f04bc data=0x19b3c0 data=0x0+0x53ffc6 syms=[0x8+0x116910+0x8+0x13b60e] >>>>>>> Loading configured modules... >>>>>>> /etc/hostid size=0x25 >>>>>>> /boot/entropy size=0x1000 >>>>>>> Using DTB provided by EFI at 0x80ec000. >>>>>>> EFI framebuffer information: >>>>>>> addr, size 0xf7800000, 0x3f4800 >>>>>>> dimensions 1920 x 1080 >>>>>>> stride 1920 >>>>>>> masks 0x0000f800, 0x000007e0, 0x0000001f, 0x00000000 >>>>>>> ---<<BOOT>>--- >>>>>>> KDB: debugger backends: ddb >>>>>>> KDB: current backend: ddb >>>>>>> Copyright (c) 1992-2020 The FreeBSD Project. >>>>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >>>>>>> The Regents of the University of California. All rights reserved. >>>>>>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>>>>>> FreeBSD 13.0-CURRENT #0 r367712M: Fri Jan 8 20:33:21 JST 2021 >>>>>>> admin@lmainkx:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64 >>>>>>> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git llvmorg-11.0.0-0-g176249bd673) >>>>>>> WARNING: WITNESS option enabled, expect reduced performance. >>>>>>> VT(efifb): resolution 1920x1080 >>>>>>> module firmware already present! >>>>>>> real memory = 4158377984 (3965 MB) >>>>>>> avail memory = 4025098240 (3838 MB) >>>>>>> Starting CPU 1 (1) >>>>>>> Starting CPU 2 (2) >>>>>>> Starting CPU 3 (3) >>>>>>> Starting CPU 4 (100) >>>>>>> Starting CPU 5 (101) >>>>>>> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs >>>>>>> random: unblocking device. >>>>>>> random: entropy device external interface >>>>>>> MAP f3f16000 mode 2 pages 4 >>>>>>> MAP f3f1b000 mode 2 pages 4 >>>>>>> MAP f6f40000 mode 2 pages 16 >>>>>>> WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0. >>>>>>> kbd0 at kbdmux0 >>>>>>> WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0. >>>>>>> ofwbus0: <Open Firmware Device Tree> >>>>>>> clk_fixed0: <Fixed clock> on ofwbus0 >>>>>>> simplebus0: <Flattened device tree simple bus> on ofwbus0 >>>>>>> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0 >>>>>>> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff750fff on ofwbus0 >>>>>>> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff on ofwbus0 >>>>>>> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0 >>>>>>> regfix0: <Fixed Regulator> on ofwbus0 >>>>>>> regfix1: <Fixed Regulator> on ofwbus0 >>>>>>> regfix2: <Fixed Regulator> on ofwbus0 >>>>>>> regfix3: <Fixed Regulator> on ofwbus0 >>>>>>> regfix4: <Fixed Regulator> on ofwbus0 >>>>>>> regfix5: <Fixed Regulator> on ofwbus0 >>>>>>> regfix6: <Fixed Regulator> on ofwbus0 >>>>>>> regfix7: <Fixed Regulator> on ofwbus0 >>>>>>> regfix8: <Fixed Regulator> on ofwbus0 >>>>>>> regfix9: <Fixed Regulator> on ofwbus0 >>>>>>> regfix10: <Fixed Regulator> on ofwbus0 >>>>>>> regfix11: <Fixed Regulator> on ofwbus0 >>>>>>> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310fff on ofwbus0 >>>>>>> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 >>>>>>> gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff irq 18 on ofwbus0 >>>>>>> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0 >>>>>>> rk_iodomain0: <RockChip IO Voltage Domain> mem 0-0xff31ffff,0-0xfff on rk_grf0 >>>>>>> rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>>>> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 >>>>>>> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 on rk_pinctrl0 >>>>>>> gpiobus0: <OFW GPIO bus> on gpio0 >>>>>>> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 on rk_pinctrl0 >>>>>>> gpiobus1: <OFW GPIO bus> on gpio1 >>>>>>> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 on rk_pinctrl0 >>>>>>> gpiobus2: <OFW GPIO bus> on gpio2 >>>>>>> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 on rk_pinctrl0 >>>>>>> gpiobus3: <OFW GPIO bus> on gpio3 >>>>>>> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 on rk_pinctrl0 >>>>>>> gpiobus4: <OFW GPIO bus> on gpio4 >>>>>>> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 >>>>>>> iicbus0: <OFW I2C bus> on rk_i2c0 >>>>>>> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 >>>>>>> iicbus1: <OFW I2C bus> on rk_i2c1 >>>>>>> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 >>>>>>> iicbus2: <OFW I2C bus> on rk_i2c2 >>>>>>> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 >>>>>>> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 >>>>>>> iicbus3: <OFW I2C bus> on rk_i2c3 >>>>>>> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2 >>>>>>> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 >>>>>>> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 >>>>>>> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 >>>>>>> rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 35 on ofwbus0 >>>>>>> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffffrk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>>>> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>>>> rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1 >>>>>>> rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on ofwbus0 >>>>>>> rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on ofwbus0 >>>>>>> cpulist0: <Open Firmware CPU Group> on ofwbus0 >>>>>>> cpu0: <Open Firmware CPU> on cpulist0 >>>>>>> cpufreq_dt0: <Generic cpufreq driver> on cpu0 >>>>>>> cpu1: <Open Firmware CPU> on cpulist0 >>>>>>> cpufreq_dt1: <Generic cpufreq driver> on cpu1 >>>>>>> cpu2: <Open Firmware CPU> on cpulist0 >>>>>>> cpufreq_dt2: <Generic cpufreq driver> on cpu2 >>>>>>> cpu3: <Open Firmware CPU> on cpulist0 >>>>>>> cpufreq_dt3: <Generic cpufreq driver> on cpu3 >>>>>>> cpu4: <Open Firmware CPU> on cpulist0 >>>>>>> cpufreq_dt4: <Generic cpufreq driver> on cpu4 >>>>>>> cpu5: <Open Firmware CPU> on cpulist0 >>>>>>> cpufreq_dt5: <Generic cpufreq driver> on cpu5 >>>>>>> pcib0: <Rockchip PCIe controller> mem 0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0 >>>>>>> pcib0: Gen1 link training timeouted: 0x00080001. >>>>>>> pci0: <PCI bus> on pcib0 >>>>>>> pcib1: <PCI-PCI bridge> at device 0.0 on pci0 >>>>>>> pcib0: failed to reserve resource for pcib1 >>>>>>> pcib1: failed to allocate initial memory window: 0-0xfffff >>>>>>> pci1: <PCI bus> on pcib1 >>>>>>> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0 >>>>>>> rockchip_dwmmc0: Hardware version ID is 270a >>>>>>> rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0 >>>>>>> rockchip_dwmmc1: Hardware version ID is 270a >>>>>>> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33ffff irq 12 on ofwbus0 >>>>>>> rk_emmcphy0: got emmcclk clock >>>>>>> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BROKEN_TIMEOUT quirk. >>>>>>> sdhci_fdt0: 1 slot(s) allocated >>>>>>> mmc0: <MMC/SD bus> on sdhci_fdt0 >>>>>>> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus0 >>>>>>> usbus0: EHCI version 1.0 >>>>>>> usbus0 on ehci0 >>>>>>> ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on ofwbus0 >>>>>>> usbus1 on ohci0 >>>>>>> ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on ofwbus0 >>>>>>> usbus2: EHCI version 1.0 >>>>>>> usbus2 on ehci1 >>>>>>> ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on ofwbus0 >>>>>>> usbus3 on ohci1 >>>>>>> rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0 >>>>>>> xhci0: <Synopsys Designware DWC3> mem 0xfe800000-0xfe8fffff irq 77 on rk_dwc30 >>>>>>> xhci0: 64 bytes context size, 32-bit DMA >>>>>>> usbus4: trying to attach >>>>>>> usbus4 on xhci0 >>>>>>> rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0 >>>>>>> xhci1: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 78 on rk_dwc31 >>>>>>> xhci1: 64 bytes context size, 32-bit DMA >>>>>>> usbus5: trying to attach >>>>>>> usbus5 on xhci1 >>>>>>> iicbus0: <unknown card> at addr 0x22 >>>>>>> iic0: <I2C generic I/O> on iicbus0 >>>>>>> iic1: <I2C generic I/O> on iicbus1 >>>>>>> uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0 >>>>>>> uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0 >>>>>>> uart1: console (1500000,n,8,1) >>>>>>> spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0 >>>>>>> spibus0: <OFW SPI bus> on spi0 >>>>>>> spibus0: <unknown card> at cs 0 mode 0 >>>>>>> iicbus2: <unknown card> at addr 0x82 >>>>>>> iic2: <I2C generic I/O> on iicbus2 >>>>>>> iicbus3: <unknown card> at addr 0x44 >>>>>>> iic3: <I2C generic I/O> on iicbus3 >>>>>>> pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0 >>>>>>> pwmbus0: <OFW PWM bus> on pwm0 >>>>>>> pwmc0: <PWM Control> channel 0 on pwmbus0 >>>>>>> pwm1: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0 >>>>>>> pwmbus1: <OFW PWM bus> on pwm1 >>>>>>> pwmc1: <PWM Control> channel 0 on pwmbus1 >>>>>>> gpioc0: <GPIO controller> on gpio0 >>>>>>> gpioc1: <GPIO controller> on gpio1 >>>>>>> gpioc2: <GPIO controller> on gpio2 >>>>>>> gpioc3: <GPIO controller> on gpio3 >>>>>>> gpioc4: <GPIO controller> on gpio4 >>>>>>> gpioled0: <GPIO LEDs> on ofwbus0 >>>>>>> cryptosoft0: <software crypto> >>>>>>> Timecounters tick every 1.000 msec >>>>>>> usbus0: 480Mbps High Speed USB v2.0 >>>>>>> usbus1: 12Mbps Full Speed USB v1.0 >>>>>>> usbus2: 480Mbps High Speed USB v2.0 >>>>>>> usbus3: 12Mbps Full Speed USB v1.0 >>>>>>> usbus4: 5.0Gbps Super Speed USB v3.0 >>>>>>> usbus5: 5.0Gbps Super Speed USB v3.0 >>>>>>> ugen3.1: <Generic OHCI root HUB> at usbus3 >>>>>>> uhub0 on usbus3 >>>>>>> uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 >>>>>>> ugen2.1: <Generic EHCI root HUB> at usbus2 >>>>>>> uhub1 on usbus2 >>>>>>> uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 >>>>>>> ugen1.1: <Generic OHCI root HUB> at usbus1 >>>>>>> uhub2 on usbus1 >>>>>>> uhub2: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >>>>>>> ugen0.1: <Generic EHCI root HUB> at usbus0 >>>>>>> uhub3 on usbus0 >>>>>>> uhub3: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 >>>>>>> ugen5.1: <Synopsys XHCI root HUB> at usbus5 >>>>>>> uhub4 on usbus5 >>>>>>> uhub4: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 >>>>>>> ugen4.1: <Synopsys XHCI root HUB> at usbus4 >>>>>>> uhub5 on usbus4 >>>>>>> uhub5: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4 >>>>>>> mmcsd0: 125GB <MMCHC DA4128 0.1 SN AD0EFC3E MFG 03/2019 by 69 0x0000> at mmc0 25.0MHz/8bit/65535-block >>>>>>> mmcsd0boot0: 4MB partition 1 at mmcsd0 >>>>>>> mmcsd0boot1: 4MB partition 2 at mmcsd0 >>>>>>> mmcsd0rpmb: 17MB partition 3 at mmcsd0 >>>>>>> Release APs...done >>>>>>> CPU 0: ARM Cortex-A53 r0p4 affinity: 0 0 >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>>>>>> Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL> >>>>>>> Instruction Set Attributes 1 = <> >>>>>>> Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32> >>>>>>> Processor Features 1 = <> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>>>>>> Memory Model Features 1 = <8bit VMID> >>>>>>> Memory Model Features 2 = <32bit CCIDX,48bit VA> >>>>>>> Trying to mount root from ufs:/dev/mmcsd0p3 [rw]... >>>>>>> Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8> >>>>>>> Debug Features 1 = <> >>>>>>> Auxiliary Features 0 = <> >>>>>>> Auxiliary Features 1 = <> >>>>>>> CPU 1: ARM Cortex-A53 r0p4 affinity: 0 1 >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>>>>>> CPU 2: ARM Cortex-A53 r0p4 affinity: 0 2 >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>>>>>> CPU 3: ARM Cortex-A53 r0p4 affinity: 0 3 >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA> >>>>>>> CPU 4: ARM Cortex-A72 r0p2 affinity: 1 0 >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> >>>>>>> CPU 5: ARM Cortex-A72 r0p2 affinity: 1 1 >>>>>>> Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG> >>>>>>> Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,16TB PA> >>>>>>> WARNING: WITNESS option enabled, expect reduced performance. >>>>>>> Unresolved linked clock found: clkin_gmac >>>>>>> uhub0: 1 port with 1 removable, self powered >>>>>>> uhub2: 1 port with 1 removable, self powered >>>>>>> Warning: no time-of-day clock registered, system time will not be set accurately >>>>>>> uhub4: 2 ports with 2 removable, self powered >>>>>>> uhub5: 2 ports with 2 removable, self powered >>>>>>> uhub3: 1 port with 1 removable, self powered >>>>>>> uhub1: 1 port with 1 removable, self powered >>>>>>> Setting hostuuid: 31323634-3737-6236-6162-336630376339. >>>>>>> Setting hostid: 0x5d4b60f9. >>>>>>> Starting file system checks: >>>>>>> /dev/mmcsd0p3: FILE SYSTEM CLEAN; SKIPPING CHECKS >>>>>>> /dev/mmcsd0p3: clean, 27264816 free (352 frags, 3408058 blocks, 0.0% fragmentation) >>>>>>> lock order reversal: >>>>>>> 1st 0xffffa00062dabbe0 ufs (ufs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:1724 >>>>>>> 2nd 0xffffa00062c9ddc8 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:2918 >>>>>>> lock order devfs -> ufs established at: >>>>>>> #0 0xffff000000569234 at witness_checkorder+0x448 >>>>>>> #1 0xffff0000004cbaec at lockmgr_lock_flags+0x1d8 >>>>>>> #2 0xffff00000075ad38 at ffs_lock+0x64 >>>>>>> #3 0xffff0000005ed57c at _vn_lock+0x54 >>>>>>> #4 0xffff0000005ce630 at vfs_domount+0xdf8 >>>>>>> #5 0xffff0000005cca08 at vfs_donmount+0x2b4 >>>>>>> #6 0xffff0000005d0e78 at kernel_mount+0x4c >>>>>>> #7 0xffff0000005d3564 at parse_mount+0x49c >>>>>>> #8 0xffff0000005d1b58 at vfs_mountroot+0x3fc >>>>>>> #9 0xffff00000048dc68 at start_init+0x24 >>>>>>> #10 0xffff0000004b7474 at fork_exit+0x7c >>>>>>> lock order ufs -> devfs attempted at: >>>>>>> #0 0xffff000000569a40 at witness_checkorder+0xc54 >>>>>>> #1 0xffff0000004cd560 at lockmgr_xlock+0x50 >>>>>>> #2 0xffff0000005ed57c at _vn_lock+0x54 >>>>>>> #3 0xffff0000005d77d8 at vget_finish+0x4c >>>>>>> #4 0xffff0000003b1b30 at devfs_allocv+0xd0 >>>>>>> #5 0xffff0000003b12c0 at devfs_root+0x44 >>>>>>> #6 0xffff0000005dcbc8 at vfs_cache_root_fallback+0x154 >>>>>>> #7 0xffff0000005d89b0 at vflush+0x5c >>>>>>> #8 0xffff0000003b11c8 at devfs_unmount+0x34 >>>>>>> #9 0xffff0000005cf4c4 at dounmount+0x43c >>>>>>> #10 0xffff0000005cf040 at kern_unmount+0x2d8 >>>>>>> #11 0xffff000000812d0c at do_el0_sync+0x454 >>>>>>> #12 0xffff0000007f2a24 at handle_el0_sync+0x90 >>>>>>> Mounting local filesystems:. >>>>>>> ELF ldconfig path: /lib /usr/lib /usr/lib/compat >>>>>>> Setting hostname: kazu.tfc. >>>>>>> ugen1.2: <HAILUCK CO.,LTD USB KEYBOARD> at usbus1 >>>>>>> ukbd0 on uhub2 >>>>>>> ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 2> on usbus1 >>>>>>> kbd1 at ukbd0 >>>>>>> Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED >>>>>>> Feeding entropy: . >>>>>>> lo0: link state changed to UP >>>>>>> Starting Network: lo0. >>>>>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 >>>>>>> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> >>>>>>> inet6 ::1 prefixlen 128 >>>>>>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 >>>>>>> inet 127.0.0.1 netmask 0xff000000 >>>>>>> groups: lo >>>>>>> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >>>>>>> Starting devd. >>>>>>> Autoloading module: mx25l.ko >>>>>>> mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 >>>>>>> mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase size 4K >>>>>>> Autoloading module: pwm_backlight.ko >>>>>>> link_elf: symbol backlight_get_info_desc undefined >>>>>>> kldload: can't load pwm_backlight.ko: No such file or directory >>>>>>> Autoloading module: uhid.ko >>>>>>> Autoloading module: wmt.ko >>>>>>> add host 127.0.0.1: gateway lo0 fib 0: route already in table >>>>>>> route: writing to routing socket: Network is unreachable >>>>>>> add net default: gateway 192.168.1.254 fib 0: Network is unreachable >>>>>>> add host ::1: gateway lo0 fib 0: route already in table >>>>>>> add net fe80::: gateway ::1 >>>>>>> add net ff02::: gateway ::1 >>>>>>> add net ::ffff:0.0.0.0: gateway ::1 >>>>>>> add net ::0.0.0.0: gateway ::1 >>>>>>> Updating /var/run/os-release done. >>>>>>> Creating and/or trimming log files. >>>>>>> Updating motd:. >>>>>>> Clearing /tmp (X related). >>>>>>> Starting syslogd. >>>>>>> No core dumps found. >>>>>>> Mounting late filesystems:. >>>>>>> Security policy loaded: MAC/ntpd (mac_ntpd) >>>>>>> Starting ntpd. >>>>>>> Feb 3 18:00:15 kazu ntpd[1004]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired 38 days ago >>>>>>> Performing sanity check on sshd configuration. >>>>>>> Starting sshd. >>>>>>> Starting cron. >>>>>>> Starting sendmail. >>>>>>> Starting sendmail_msp_queue. >>>>>>> Configuring vt: blanktime screensaverFeb 3 18:00:16 kazu ntpd[1004]: error resolving pool 0.freebsd.pool.ntp.org: Name does not resolve (8) >>>>>>> kldload: can't load logo_saver: No such file or directory >>>>>>> /etc/rc: WARNING: Unable to load kernel module logo_saver >>>>>>> . >>>>>>> Starting background file system checks in 60 seconds. >>>>>>> >>>>>>> Wed Feb 3 18:00:16 JST 2021 >>>>>>> >>>>>>> FreeBSD/arm64 (kazu.tfc) (ttyu1) >>>>>>> >>>>>>> login: >>>>>>> >>>>>>> >>>>>>> [1] https://github.com/TrueFC/ports/tree/master/sysutils/u-boot-pinebook-pro >>>>>>>> the twitter thread >>>>>>>> https://twitter.com/jsm22413542/status/1355896239104159748 >>>>>>>> >>>>>>>> Long story short I keep CPLL at 800000000 but set ACLK_VOP1 at 594000000.. >>>>>>>> >>>>>>>> >>>>>>>> /Jsm >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> freebsd-arm@freebsd.org mailing list >>>>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >>>>>>>> >>>>>>> --- >>>>>>> Kazuhiko Kiriyama <kiri@truefc.org> >>>>>> _______________________________________________ >>>>>> freebsd-arm@freebsd.org mailing list >>>>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >>>>>> >>>> _______________________________________________ >>>> freebsd-arm@freebsd.org mailing list >>>> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >>>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >>>> >> _______________________________________________ >> freebsd-arm@freebsd.org mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ec92dd19-851e-84de-f602-11607439cb6e>