From owner-freebsd-hackers Wed Jun 26 02:44:36 1996 Return-Path: owner-hackers Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id CAA26682 for hackers-outgoing; Wed, 26 Jun 1996 02:44:36 -0700 (PDT) Received: from fgate.flevel.co.uk (fgate.flevel.co.uk [194.6.101.2]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id CAA26677 for ; Wed, 26 Jun 1996 02:44:31 -0700 (PDT) Received: from localhost (dev@localhost) by fgate.flevel.co.uk (8.6.12/8.6.9) with SMTP id KAA06566; Wed, 26 Jun 1996 10:48:01 +0100 Date: Wed, 26 Jun 1996 10:48:01 +0100 (BST) From: Developer To: Michael Smith cc: hackers@freebsd.org Subject: Re: BSD V2.2 In-Reply-To: <199606260850.SAA05396@genesis.atrad.adelaide.edu.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-hackers@freebsd.org X-Loop: FreeBSD.org Precedence: bulk On Wed, 26 Jun 1996, Michael Smith wrote: > Firstly, my apologies to you and one other party; I wasn't aware that > there'd been another 2.2 SNAP recently (I didn't get my subscription CD?!), > the only 9606* SNAP I'd seen was the 2.1-960606 version. > > Now, to address your question; have you built a new copy of the 'config' > program to match the kernel? What you're seeing is a classic symptom > of the two being out of sync. Yes, I did re-compile config.. I found the problem was that my config was wrong because the device names had changed in the new config. Now I get the problem that when I boot the kernel on a 486 dx 100 VBL machine it just loads the kernel into memory and then reboots :( Here is my config:- # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # $Id: GENERIC,v 1.46.2.6 1995/10/25 17:29:51 jkh Exp $ # machine "i386" #cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" ident GENERIC maxusers 48 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options GATEWAY #Routing on options MROUTING #Multicast routing options KTRACE #Kernel tracing options FAILSAFE #Be conservative? options USER_LDT #For win emu options SYSVSHM options SYSVSEM options SYSVMSG options COMPAT_LINUX #For linux emu options QUOTA #Enable quotas config kernel root on wd0 controller isa0 controller pci0 controller eisa0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #not as lkm device wcd0 #IDE CD-ROM controller ncr0 controller ahb0 controller ahc0 controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr controller aic0 at isa? port 0x340 bio irq 11 vector aicintr controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 device sd0 device od0 device st0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty device lpt2 at isa? port? tty device mse0 at isa? port 0x23c tty irq 5 vector mseintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 device ed0 at isa? port 0x260 net irq 3 iomem 0xd8000 vector edintr device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr device ep0 at isa? port 0x300 net irq 10 vector epintr device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 8 pseudo-device sppp pseudo-device bpfilter 4 pseudo-device tun 8 pseudo-device pty 64 pseudo-device gzip # Exec gzipped a.out's Any help would be appreciated. Regards, Trefor S.