Date: Tue, 21 Jan 2003 17:39:42 -0600 (CST) From: Stephen Cravey <cravey@gotbrains.org> To: silby@silby.com Cc: freebsd-bugs@FreeBSD.org Subject: Re: kern/47251: 5.0 RELEASE, panic in mii_physubr.c (xl0 Driver) Message-ID: <20030121171746.F37185@www.gotbrains.org>
next in thread | raw e-mail | index | archive | help
Could you please post a patch applicable to RELEASE rather than just CURRENT ? The line numbers are different between the two for some reason (more patches maybe) and I think a functioning -RELEASE patch would be more beneficial to those of us trying to run an (expendable backup) production server. Maybe a commit to RELEASE as a patch since it makes some 905s unuseable. I think it'll solve my problem. I have a cruddy HP computer with 2 PCI slots i've been running as a 4.x router/test box. 1 slot has a 905cx-txm and the other is a 905b-txnm. Both get the same irq on boot. In 5.0, on boot, the link light for the B seems o turn off when the kernel loads or thereabouts making it unuseable. The C is then useable, but creates a slew of network problems. when ssh'd in from another machine, I get a Disconnecting: Corrupted MAC on input. error during the session or: key_verify failed for server_host_key during negotiation. Failures seem to occur after a light (4-5K) amount of data has been transfered through the interface. By removing the B, the problems decrease to about 5% the frequency. by removing the C instead, they seem to go away totally. Both cards were working fine previously. I suspect that the xl driver is totally unsuitable ATM for production use. For those of us who work with a few dozen 905's, it's not a little problem with the release. Thanks for making FreeBSD better. -Stephen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030121171746.F37185>