Date: Tue, 10 Feb 2004 22:29:26 +1100 From: Tony Frank <tfrank@optushome.com.au> To: Guido Winkelmann <guido@prophetic-entertainment.de> Cc: freebsd-hardware@freebsd.org Subject: Re: Performance problems with a Via Rhine II and a rtl8139C NIC on a Via Epia MB Message-ID: <20040210112926.GA15812@marvin.home.local> In-Reply-To: <200402092310.54580.guido@prophetic-entertainment.de> References: <200402081402.59616.guido@prophetic-entertainment.de> <20040209130216.GB6585@marvin.home.local> <200402092310.54580.guido@prophetic-entertainment.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, On Mon, Feb 09, 2004 at 11:10:26PM +0100, Guido Winkelmann wrote: > > Have you checked that you have the NIC setup for same speed/duplex as your > > switch/hub/other pc ? > The autonegotiated setting for the card is 100baseTX <full-duplex>, according > to ifconfig, which is the same setting all the other cards connected to that > switch are using. I meant check that the port on the switch is running in 100 full duplex. If the switch port is half-duplex mode you will likely run into collisions or similar. Perhaps a 'netstat -i' will show if you are having errors on your interface? Tony
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040210112926.GA15812>