From owner-freebsd-questions Sat Sep 16 09:34:08 1995 Return-Path: owner-questions Received: (from root@localhost) by freefall.freebsd.org (8.6.12/8.6.6) id JAA08110 for questions-outgoing; Sat, 16 Sep 1995 09:34:08 -0700 Received: from aslan.cdrom.com (aslan.cdrom.com [192.216.223.142]) by freefall.freebsd.org (8.6.12/8.6.6) with ESMTP id JAA08104 for ; Sat, 16 Sep 1995 09:34:06 -0700 Received: from localhost.cdrom.com (localhost.cdrom.com [127.0.0.1]) by aslan.cdrom.com (8.6.12/8.6.9) with SMTP id JAA05551; Sat, 16 Sep 1995 09:33:23 -0700 Message-Id: <199509161633.JAA05551@aslan.cdrom.com> X-Authentication-Warning: aslan.cdrom.com: Host localhost.cdrom.com didn't use HELO protocol To: "Mr. Samuel TinLok Chan" cc: questions@FreeBSD.org Subject: Re: AHA-2940 problem In-reply-to: Your message of "Sat, 16 Sep 1995 20:22:50 +0800." Date: Sat, 16 Sep 1995 09:33:23 -0700 From: "Justin T. Gibbs" Sender: owner-questions@FreeBSD.org Precedence: bulk >I have purchase a FreeBSD version 2.0.5. When I boot up my machine with >the boot floop, it couldn't found my SCSI hard disk. I am using a mother >board with build-in AHA-2940. I have tried to use the "Config" utility to >alter the setting of my SCSI controller, however, I couldn't found the >device "ahc0" in the listing.("ahc0" is the device name of AHA-2940 >specified in the file "hardware") What's wrong with my kernel? Am I >purchased a wrong version of FreeBSD? Please help me to fixed this >problem because I am hurry to install the FreeBSD, thanks a lot! > >Regards, > >Samuel Chan >(Hong Kong) Are you sure that you have an aic7870 based motherboard control? It sounds like you have an aic7850 on your motherboard which is not (as yet) supported. -- Justin T. Gibbs =========================================== Software Developer - Walnut Creek CDROM FreeBSD: Turning PCs into workstations ===========================================