Date: Tue, 1 Nov 2005 16:55:57 GMT From: Martin <nobody@junk.com> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/88340: enabling AGP on an ASUS K8V-X motherboard locks up/freezes/hangs the machine (Xorg, ATI Radeon 9250 graphics card, 0x5960, 0x1102; 0x1106, 0x0282; 0x1106, 0xb188) Message-ID: <200511011655.jA1Gtv3L039412@www.freebsd.org> Resent-Message-ID: <200511011700.jA1H0TQC017080@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 88340
>Category: i386
>Synopsis: enabling AGP on an ASUS K8V-X motherboard locks up/freezes/hangs the machine (Xorg, ATI Radeon 9250 graphics card, 0x5960, 0x1102; 0x1106, 0x0282; 0x1106, 0xb188)
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Nov 01 17:00:29 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator: Martin
>Release: RELENG_6_0 as of 2005-10-30
>Organization:
>Environment:
FreeBSD marvin.xyzzy 6.0-RC1 FreeBSD 6.0-RC1 #0: Mon Oct 31 09:12:20 CET 2005 root@marvin.xyzzy:/usr/VOL/OBJ/FreeBSD/RELENG_6_0/src/sys/MARVIN i386
>Description:
Environment:
- Motherboard ASUS K8V-X SE
- Graphics (no-name) ATI 9250 (probes as PCI id 1002:5960, with a
secondary card as 1002:5940 - see below)
- Running RELENG_6_0 as of 2005-10-30, in i386 mode (not 64 bit)
- Running XORG-6_8_99_901
Problem:
- Enabling DRI in the X server freezes/hangs the system
Possible cause:
- I have a feeling that it is either wrong or not enough to set
the K8T880Pro CPU to PCI Bridge (1106:0282), as seen from dmesg.boot.
There still is the Apollo K8HTB CPU to AGP 2.0/3.0 Bridge (1106:b188),
and it seems that nothing in the kernel sources touches/sets that.
Could some insightful soul please look into this?
Comments:
- What is intriguing to me is that a very similar PCI id of 1106:3188
is also handled in agp_amd64.c, but the (again similar) PCI id of
1106:3189 is handled in agp_via.c. I am wondering what would happen
if I just commented out both 1106:0282 and 1106:3188 from agp_amd64.c,
and added the latter to agp_via.c. But I don't really dare doing this
for fear of burning up my hardware.
- On Linux, the system freezes both with the Xorg stuff (but this then
is only SuSE 9.2, so somewhat dated), and the fglrx proprietary driver.
I don't know what would possibly happen with the latest Linux sources.
I looked at the stuff in http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;h=0e6c3a31d3448a820f4f8a95d8f43d6d6d2a9915;hb=1e4c85f97fe26fbd70da12148b3992c0e00361fd;f=drivers/char/agp/amd64-agp.c,
and it looks a lot more complicated than what we have in FreeBSD.
Output of pciconf -l -v follows:
--------------------------------------------------
hostb0@pci0:0:0: class=0x060000 card=0x80a31043 chip=0x02821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb1@pci0:0:1: class=0x060000 card=0x00000000 chip=0x12821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:2: class=0x060000 card=0x00000000 chip=0x22821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:3: class=0x060000 card=0x00000000 chip=0x32821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:4: class=0x060000 card=0x00000000 chip=0x42821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:7: class=0x060000 card=0x00000000 chip=0x72821106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'K8T880Pro CPU to PCI Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1881106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'Apollo K8HTB CPU to AGP 2.0/3.0 Bridge'
class = bridge
subclass = PCI-PCI
atapci0@pci0:15:0: class=0x010400 card=0x80ed1043 chip=0x31491106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 VT6410 SATA RAID Controller'
class = mass storage
subclass = RAID
atapci1@pci0:15:1: class=0x01018a card=0x80ed1043 chip=0x05711106 rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
uhci0@pci0:16:0: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci1@pci0:16:1: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci2@pci0:16:2: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
uhci3@pci0:16:3: class=0x0c0300 card=0x80ed1043 chip=0x30381106 rev=0x81 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
class = serial bus
subclass = USB
ehci0@pci0:16:4: class=0x0c0320 card=0x80ed1043 chip=0x31041106 rev=0x86 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6202 USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
isab0@pci0:17:0: class=0x060100 card=0x80ed1043 chip=0x32271106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 PCI-to-ISA Bridge'
class = bridge
subclass = PCI-ISA
pcm0@pci0:17:5: class=0x040100 card=0x810d1043 chip=0x30591106 rev=0x60 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
class = multimedia
subclass = audio
vr0@pci0:18:0: class=0x020000 card=0x80ed1043 chip=0x30651106 rev=0x78 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6102 Rhine II PCI Fast Ethernet Controller'
class = network
subclass = ethernet
hostb6@pci0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb7@pci0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb8@pci0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb9@pci0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
none0@pci1:0:0: class=0x030000 card=0x00011536 chip=0x59601002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV280 Radeon 9200 Pro'
class = display
subclass = VGA
none1@pci1:0:1: class=0x038000 card=0x00001536 chip=0x59401002 rev=0x01 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RV280 Radeon 9200 Pro - Secondary'
class = display
--------------------------------------------------
Contents of /var/run/dmesg.boot follows:
--------------------------------------------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RC1 #0: Mon Oct 31 09:12:20 CET 2005
root@marvin.xyzzy:/usr/VOL/OBJ/FreeBSD/RELENG_6_0/src/sys/MARVIN
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 2800+ (1602.06-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 536543232 (511 MB)
avail memory = 515715072 (491 MB)
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA K8T800Pro host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xd800-0xd807,0xd400-0xd403,0xd000-0xd007,0xc800-0xc803,0xc400-0xc40f,0xc000-0xc0ff irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfbb00000-0xfbb000ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xa400-0xa4ff irq 22 at device 17.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1888 AC97 Codec>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xa000-0xa0ff mem 0xfba00000-0xfba000ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:13:d4:bc:cb:d5
vr0: [GIANT-LOCKED]
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
speaker0: <PC speaker> port 0x61 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1602060382 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad0: 152627MB <SAMSUNG SP1634N UZ100-03> at ata0-master UDMA100
acd0: CDROM <MATSHITA CR-587/7S13> at ata1-master PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA CD-ROM CR-587 7S13> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s3a
drm0: <ATI Radeon RV280 9200> port 0xe000-0xe0ff mem 0xe8000000-0xefffffff,0xfbe00000-0xfbe0ffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xe4000000 64MB
info: [drm] Initialized radeon 1.16.0 20050311 on minor 0
info: [drm] Loading R200 Microcode
--------------------------------------------------
>How-To-Repeat:
Run the (mostly latest) Xorg on the (mostly) latest RELENG_6_0 and try to enable DRI, using an ASUS K8V-X SE motherboard.
>Fix:
See my suggestions in the full description above.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511011655.jA1Gtv3L039412>