Date: Thu, 25 May 2006 09:56:20 -0400 From: John Nielsen <lists@jnielsen.net> To: freebsd-sparc64@freebsd.org, andreamodesto.rossi01@ateneopv.it Subject: Re: Sparc Ultra 5 360Mhz Message-ID: <200605250956.20259.lists@jnielsen.net> In-Reply-To: <200605251438.23133.andreamodesto.rossi01@ateneopv.it> References: <200605251438.23133.andreamodesto.rossi01@ateneopv.it>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-00=_EebdEK1xCJ8qAs4
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
On Thursday 25 May 2006 10:38, Andrea Modesto Rossi wrote:
> I've a Sun Ultra 5 sparc system with 360Mhz rics chip.
> Can i install FreBSD 6.0?
>
> One question,is there a VGA support for this machine?For example,this
> machine has a VGA card integreted on the main board,FreeBSD " know" this
> card?Or else i buy another grafic chip(for example?)
I have a similar system (Ultra 5 333MHz) running FreeBSD 6.1 quite nicely. (I
actually installed 6.0 on it and have been doing source upgrades). I don't
have a console on it at the moment but when I did the video worked fine in
both the console and in X. I'll attach a dmesg, my kernel config and my
xorg.conf in case you're interested.
I did have a couple glitches with it but they seem to be resolved now; search
the archive for details.
JN
--Boundary-00=_EebdEK1xCJ8qAs4
Content-Type: text/plain;
charset="iso-8859-1";
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #0: Thu May 11 20:14:25 EDT 2006
john@moonpie:/usr/obj/usr/src/sys/MOONPIE
Timecounter "tick" frequency 333000000 Hz quality 1000
real memory = 536870912 (512 MB)
avail memory = 515301376 (491 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (333.00 MHz CPU)
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Sabre, impl 0, version 0, ign 0x7c0, bus A
pcib0: [FAST]
pcib0: [FAST]
pcib0: [GIANT-LOCKED]
pcib0: [GIANT-LOCKED]
pcib0 dvma: DVMA map: 0xc0000000 to 0xc3ffffff
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 1.0 on pci1
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart0: console (38400,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart2: keyboard (1200,n,8,1)
uart2: keyboard not present
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x140030015c-0x140030015d,0x1400700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80a79107
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x140070400f,0x1400722000-0x1400722003 irq 35,36 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:a7:91:07
machfb0: <ATI 3D Rage Pro> mem 0xe1000000-0xe1ffffff,0xe2000000-0xe2000fff at device 2.0 on pci1
machfb0: 16 MB aperture at 0xd58e8000, 1 KB registers at 0xe17ffc00
machfb0: 4096 KB SGRAM 98.924 MHz, maximum RAMDAC clock 230 MHz, DSP
machfb0: resolution 1152x900 at 8 bpp
atapci0: <CMD 646 WDMA2 controller> port 0xc00000-0xc00007,0xc00008-0xc0000b,0xc00010-0xc00017,0xc00018-0xc0001b,0xc00020-0xc0002f at device 3.0 on pci1
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x400-0x47f mem 0x2000-0x207f at device 1.0 on pci2
miibus1: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus1
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:50:da:2d:b4:7f
syscons0: <System console> on nexus0
syscons0: Unknown <16 virtual consoles, flags=0x100>
Timecounters tick every 2.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled
ad0: 8693MB <Seagate ST39111A 3.21> at ata2-master WDMA2
ad1: 57259MB <MAXTOR 6L060J3 A93.0500> at ata2-slave WDMA2
acd0: CDRW <CRD-8322B/1.03> at ata3-master PIO4
Trying to mount root from ufs:/dev/ad0a
--Boundary-00=_EebdEK1xCJ8qAs4
Content-Type: text/plain;
charset="iso-8859-1";
name="MOONPIE"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="MOONPIE"
machine sparc64
cpu SUN4U
ident MOONPIE
#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
makeoptions COPTFLAGS="-O -pipe"
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options ADAPTIVE_GIANT # Giant mutex is adaptive.
# Standard busses
device ebus
device isa
device pci
device sbus
device central
device fhc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
# syscons is the default console driver, resembling an SCO console
device sc
device machfb # ATI Mach64 framebuffers
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# Builtin hardware
device auxio # auxiliary I/O device
device clkbrd # Clock Board (blinkenlight on Sun Exx00)
device genclock # Generic clock interface
device eeprom # eeprom (really a front-end for the MK48Txx)
device mk48txx # Mostek MK48Txx clocks
device rtc # rtc (really a front-end for the MC146818)
device mc146818 # Motorola MC146818 and compatible clocks
# Serial (COM) ports
device uart # Multi-uart driver
device puc # Multi-channel uarts
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device hme # Sun HME (Happy Meal Ethernet)
device rl # RealTek 8129/8139
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device tap
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device bpf # Berkeley packet filter
device snp
options IPFIREWALL
options IPFIREWALL_FORWARD
options DUMMYNET
options HZ=500
#options LIBMCHAIN
#options LIBICONV
#options NETSMB
#options NETSMBCRYPTO
#options SMBFS
options SC_HISTORY_SIZE=2000
--Boundary-00=_EebdEK1xCJ8qAs4
Content-Type: text/plain;
charset="iso-8859-1";
name="xorg.conf"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="xorg.conf"
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
# Driver "kbd"
Driver "keyboard"
Option "XkbRules" "sun"
Option "XkbModel" "type5_euro"
Option "XkbLayout" "us"
Option "XkbVariant" "basic"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
# Option "Protocol" "auto"
Option "Protocol" "mousesystems"
Option "Device" "/dev/cuau3"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
VertRefresh 50-160
HorizSync 30-70
Modeline "1400x1050@126i" 139.43 1400 1432 1960 1992 1050 1071 1082 1103 interlace
Modeline "1400x1050@63" 139.43 1400 1432 1960 1992 1050 1071 1082 1103
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "test_mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "3D Rage Pro 215GP"
ChipSet "ati"
ChipId 0x4750
ChipRev 0x5c
BusID "PCI:1:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 15
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1400x1050@63"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
--Boundary-00=_EebdEK1xCJ8qAs4--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200605250956.20259.lists>