Date: Sun, 27 Mar 2011 00:45:40 +0700 From: =?KOI8-R?B?69PFztrP1yDhzMXL08XK?= <aksenzov@gmail.com> To: freebsd-acpi@freebsd.org Subject: Atheros 9285 & Atheros AR8131 Message-ID: <AANLkTiniOhLqYT_GVWTw%2BiCOH_KK096M9te_y8aR6tus@mail.gmail.com> In-Reply-To: <AANLkTi=-rourdUbyH0MVceHi81vAHcNdpaxjpmxJ_BCk@mail.gmail.com> References: <AANLkTi=-rourdUbyH0MVceHi81vAHcNdpaxjpmxJ_BCk@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Network cards do not work. Tried on systems 8.0, 8.1, and 8.2. Notebook Aser
Extenza 5635ZG. Tried to change Wi-Fi adapter on the other, but the
situation has not changed. In all kinds of windows and linux, works fine.
ath0: <Atheros 9285> irq 19 at device 0.0 on pci7
ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
ath0: cannot map register space
device_attach: ath0 attach returned 6
alc0: <Atheros AR8131 PCIe Gigabit Ethernet> irq 17 at device 0.0 on pci9
alc0: 0x40000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
alc0: cannot allocate memory resources.
device_attach: alc0 attach returned 6
Attached: dmesg, sysctl hw.acpi and acpidump -t -d
[-- Attachment #2 --]
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0fdb000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2194757323 Hz
CPU: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz (2194.76-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x400e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
2nd-level cache: 1 MB, 4-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
L2 cache: 1024 kbytes, 4-way associative, 64 bytes/line
real memory = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001026000 - 0x000000007d464fff, 2084827136 bytes (508991 pages)
0x000000007f8a7000 - 0x000000007f9c9fff, 1191936 bytes (291 pages)
0x000000007fa0f000 - 0x000000007fb08fff, 1024000 bytes (250 pages)
0x000000007fd0f000 - 0x000000007fd18fff, 40960 bytes (10 pages)
0x000000007fd1f000 - 0x000000007fd63fff, 282624 bytes (69 pages)
0x000000007fd9f000 - 0x000000007fdd0fff, 204800 bytes (50 pages)
avail memory = 2086244352 (1989 MB)
Table 'FACP' at 0x7fde5000
Table 'HPET' at 0x7fdfeefc
Table 'MCFG' at 0x7fdfef34
Table 'APIC' at 0x7fdfef70
APIC: Found table at 0x7fdfef70
MP Configuration Table version 1.4 found at 0xc009f971
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
bios32: Found BIOS32 Service Directory header at 0xc00f75a0
bios32: Entry = 0xfda21 (c00fda21) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfda20+0x221
pnpbios: Found PnP BIOS data at 0xc00f7620
pnpbios: Entry = f0000:bf0c Rev = 1.0
Other BIOS signatures found:
x86bios: IVT 0x000000-0x0004ff at 0xc0000000
x86bios: SSEG 0x010000-0x01ffff at 0xc51be000
x86bios: EBDA 0x09f000-0x09ffff at 0xc009f000
x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf7510 00024 (v02 PTLTD )
ACPI: XSDT 0x7fdf5a67 00064 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
ACPI: FACP 0x7fde5000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 0x7fde6000 092A1 (v02 Intel CANTIGA 06040000 INTL 20061109)
ACPI: FACS 0x7fd9efc0 00040
ACPI: HPET 0x7fdfeefc 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 0x7fdfef34 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: APIC 0x7fdfef70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x7fdfefd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 0x7fde4000 00655 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 0x7fde3000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x7fde2000 0020F (v01 PmRef ApTst 00003000 INTL 20061109)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <PTLTD XSDT> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
pcibios: BIOS version 3.00
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc51b8000 pa 0x1000
unknown: I/O range not supported
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 4 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0x7fd1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x7fd19620 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0x7fd1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 001CF (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 0x7fd1af20 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 0008D (v01 PmRef ApCst 00003000 INTL 20061109)
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 7 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a40, revid=0x07
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a41, revid=0x07
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x18 (6000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2937, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x1800, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
found-> vendor=0x8086, dev=0x2938, revid=0x03
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
found-> vendor=0x8086, dev=0x293c, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf0404000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 19
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0404000
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf0400000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x03
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2946, revid=0x03
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x294a, revid=0x03
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2934, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
found-> vendor=0x8086, dev=0x2935, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
found-> vendor=0x8086, dev=0x2936, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
found-> vendor=0x8086, dev=0x2939, revid=0x03
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
found-> vendor=0x8086, dev=0x293a, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf0404400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0404400
found-> vendor=0x8086, dev=0x2448, revid=0x93
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2919, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2928, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x18f0, size 3, enabled
map[14]: type I/O Port, range 32, base 0x18e4, size 2, enabled
map[18]: type I/O Port, range 32, base 0x18e8, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x18e0, size 2, enabled
map[20]: type I/O Port, range 32, base 0x18d0, size 4, enabled
map[24]: type I/O Port, range 32, base 0x18c0, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 64, base 0, size 8, enabled
map[20]: type I/O Port, range 32, base 0x1c00, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 19
found-> vendor=0x8086, dev=0x292d, revid=0x03
domain=0, bus=0, slot=31, func=5
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x1c48, size 3, enabled
map[14]: type I/O Port, range 32, base 0x18fc, size 2, enabled
map[18]: type I/O Port, range 32, base 0x1c40, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x18f8, size 2, enabled
map[20]: type I/O Port, range 32, base 0x1c30, size 4, enabled
map[24]: type I/O Port, range 32, base 0x1c20, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xcc000000-0xceffffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x06ec, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xce000000, size 24, enabled
pcib1: requested memory range 0xce000000-0xceffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
map[1c]: type Memory, range 64, base 0xcc000000, size 25, enabled
pcib1: requested memory range 0xcc000000-0xcdffffff: good
map[24]: type I/O Port, range 32, base 0x2000, size 7, enabled
pcib1: requested I/O range 0x2000-0x207f: in range
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xce000000-0xceffffff,0xd0000000-0xdfffffff,0xcc000000-0xcdffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 16 at device 26.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 21 at device 26.1 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0404000-0xf04043ff irq 19 at device 26.7 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 51
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 4
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib3: domain 0
pcib3: secondary bus 7
pcib3: subordinate bus 7
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci7: <ACPI PCI bus> on pcib3
pci7: domain=0, physical bus=7
found-> vendor=0x168c, dev=0x002b, revid=0x01
domain=0, bus=7, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0, size 16, memory disabled
pcib3: matched entry for 7.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 19
ath0: <Atheros 9285> irq 19 at device 0.0 on pci7
pcib3: ath0 requested unsupported memory range 0-0xffffffff (decoding 0-0, 0-0)
ath0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
ath0: cannot map register space
device_attach: ath0 attach returned 6
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib4: domain 0
pcib4: secondary bus 9
pcib4: subordinate bus 9
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.RP06 - AE_NOT_FOUND
pci9: <ACPI PCI bus> on pcib4
pci9: domain=0, physical bus=9
found-> vendor=0x1969, dev=0x1063, revid=0xc0
domain=0, bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0, size 18, memory disabled
map[18]: type I/O Port, range 32, base 0, size 7, port disabled
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
pcib4: slot 0 INTA is routed to irq 17
alc0: <Atheros AR8131 PCIe Gigabit Ethernet> irq 17 at device 0.0 on pci9
pcib4: alc0 requested unsupported memory range 0-0xffffffff (decoding 0-0, 0-0)
alc0: 0x40000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
alc0: cannot allocate memory resources.
device_attach: alc0 attach returned 6
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
uhci2: [MPSAFE]
uhci2: [ITHREAD]
usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 19 at device 29.1 on pci0
uhci3: [MPSAFE]
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
uhci4: [MPSAFE]
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 16 at device 29.3 on pci0
uhci5: [MPSAFE]
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf0404400-0xf04047ff irq 23 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: domain 0
pcib5: secondary bus 10
pcib5: subordinate bus 10
pcib5: I/O decode 0xf000-0xfff
pcib5: no prefetched decode
pcib5: Subtractively decoded bridge.
pci10: <ACPI PCI bus> on pcib5
pci10: domain=0, physical bus=10
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18d0-0x18df,0x18c0-0x18cf irq 19 at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18d0
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x18f0
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x18e4
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x18e8
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x18e0
ata3: reset tp1 mask=03 ostat0=50 ostat1=00
ata3: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata3: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata3: reset tp2 stat0=00 stat1=00 devices=0x30000
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ATA controller> port 0x1c48-0x1c4f,0x18fc-0x18ff,0x1c40-0x1c47,0x18f8-0x18fb,0x1c30-0x1c3f,0x1c20-0x1c2f irq 19 at device 31.5 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1c30
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1c48
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x18fc
ata4: reset tp1 mask=03 ostat0=7f ostat1=7f
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata4: reset tp2 stat0=ff stat1=ff devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x1c40
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x18f8
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 54
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 55
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xe0000-0xe17ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57
ata1: [MPSAFE]
ata1: [ITHREAD]
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99761700 Hz
Timecounter "TSC" frequency 2194757323 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00000000
ata0: New devices: 00000000
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
acpi_acad0: acline initialization start
battery0: battery initialization start
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wireacpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: setting UDMA33
ad4: 305245MB <Seagate ST9320325AS 0001SDM1> at ata2-master UDMA33
ad4: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00030000
ata3: New devices: 00030000
ata3: timeout waiting for read DRQ
ata3: timeout waiting for read DRQ
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
acd0: setting UDMA33
acd0: <TSSTcorp CDDVDW TS-L633C/AC01> DVDR drive at ata3 as master
acd0: read 10820KB/s (10820KB/s) write 5410KB/s (5410KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: DVD 120mm data disc
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 1 vector 49
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 1 vector 52
uhub2: 4 ports with 4 removable, self powered
uhub7: 8 ports with 8 removable, self powered
ugen0.2: <A4Tech> at usbus0
ums0: <A4Tech PS/2+USB Mouse, class 0/0, rev 1.10/0.02, addr 2> on usbus0
ums0: 8 buttons and [XYZ] coordinates ID=0
ugen7.2: <SuYin> at usbus7
Trying to mount root from ufs:/dev/ad4s1a
ct_to_ts([2011-03-26 16:48:17]) = 1301158097.000000000
start_init: trying /sbin/init
[-- Attachment #3 --]
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: NONE
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 0
hw.acpi.reset_video: 0
hw.acpi.cpu.cx_lowest: C1
hw.acpi.acline: 1
hw.acpi.battery.life: -1
hw.acpi.battery.time: -1
hw.acpi.battery.state: 7
hw.acpi.battery.units: 1
hw.acpi.battery.info_expire: 5
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 10
hw.acpi.thermal.user_override: 0
hw.acpi.thermal.tz0.temperature: 73.0C
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.passive_cooling: 1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 105.0C
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 108.0C
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.thermal.tz0._TC1: 2
hw.acpi.thermal.tz0._TC2: 3
hw.acpi.thermal.tz0._TSP: 40
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTiniOhLqYT_GVWTw%2BiCOH_KK096M9te_y8aR6tus>