From owner-freebsd-questions Mon Nov 15 22:33:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mayhem.com (mayhem.com [204.254.116.10]) by hub.freebsd.org (Postfix) with ESMTP id A595814D83 for ; Mon, 15 Nov 1999 22:33:11 -0800 (PST) (envelope-from jacob@mayhem.com) Received: (from jacob@localhost) by mayhem.com (8.9.1/8.9.1) id BAA00397 for freebsd-questions@freebsd.org; Tue, 16 Nov 1999 01:33:10 -0500 (EST) (envelope-from jacob) From: Jacob DeGlopper Message-Id: <199911160633.BAA00397@mayhem.com> Subject: SCSI/CAM errors with Yamaha CRW6416sz CD-RW and NCR 815 card To: freebsd-questions@freebsd.org Date: Tue, 16 Nov 1999 01:33:10 -0500 (EST) X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am running FreeBSD 3.0-RELEASE. I have recently acquired a Yamaha CRZ6416sz SCSI CD-RW drive. I have an existing SCSI chain with a NCR 815 card, Seagate disk, and HP DAT drive; all those have been working fine. When booting the system with the new drive installed, I get some errors, and then the system halts. Running a kernel without the SCSI cd device configured gets the CD-ROM recognized by the pass driver without errors. I have double-checked the terminator, and tried other SCSI ids with no change. The drive appears to work fine in Windows. I have also tried adjusting the SCSI_DELAY timeout up to 20 seconds with no change. The specific errors I get are: cd0:ncr0:0:2:0: got CAM status 0x4a fatal error, failed to attach to device (cd0:ncr0:0:2:0) removing device entry then, I get the message ncr0: timeout nccb= (skip) -- Jacob DeGlopper, FF/EMT-B, N3RHI jacob@mayhem.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message