Date: Tue, 22 Jul 2008 14:27:28 +0300 From: Manolis Kiagias <sonic2000gr@gmail.com> To: Achilleas Mantzios <achill@matrix.gatewaynet.com> Cc: Tore Lund <tl32@next.online.no>, freebsd-questions@freebsd.org Subject: Re: Monitoring CPU temperature: mbmon shows 201 degrees C Message-ID: <4885C420.9080307@gmail.com> In-Reply-To: <200807221404.29646.achill@matrix.gatewaynet.com> References: <48849FFD.10285.C71CED5@iwrtech.iwr.ru.ac.za> <200807220943.42926.achill@matrix.gatewaynet.com> <48858932.60206@gmail.com> <200807221404.29646.achill@matrix.gatewaynet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Achilleas Mantzios wrote:
>>
>>> While experimenting, i noticed the 1st and 3rd temperatures from mbmon to be updated in a fashion that seems
>>> natural.
>>> [achix@panix ~]% mbmon
>>> Temp.= 41.0, 201.0, 42.0; Rot.= 3443, 0, 0
>>> Vcore = 1.50, 1.81; Volt. = 3.30, 5.08, 11.43, -11.74, -1.69
>>>
>>>
>> What chipset is the mobo based on? mbmon runs fine on my 865G and a 3Ghz
>> P4 CPU. You are probably correct, the middle temp may represent a sensor
>> that is not recognized, but the other readings seem normal.
>>
>>
>
> i'll let you know next time i open the case. Is there any reading from dmesg or sysctl that can reveal
> that info?
>
>
Sure. There are various places to get this info. Sometimes the BIOS
startup messages contain a hint on the chipset (like 865, 915 and so on).
My dmesg also shows:
agp0: <Intel 82865 host to AGP bridge> on hostb0
And you can also use pciconf -v -l
hdr=0x00
vendor = 'Intel Corporation'
device = '82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface'
class = bridge
subclass = HOST-PCI
Considering that you are running an older P4, probably socket 478,
chances are you are using an 845 or 848 or 865 chipset.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4885C420.9080307>