From owner-freebsd-hackers Mon Mar 27 11:57:01 1995 Return-Path: hackers-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id LAA02857 for hackers-outgoing; Mon, 27 Mar 1995 11:57:01 -0800 Received: from obiwan.pmr.com ([199.98.84.130]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id LAA02849 for ; Mon, 27 Mar 1995 11:56:59 -0800 Received: by obiwan.pmr.com (Smail3.1.29.1 #4) id m0rtH38-00030WC; Mon, 27 Mar 95 09:49 CST Message-Id: From: bob@obiwan.pmr.com (Bob Willcox) Subject: Re: Another fix for 3C509 To: babkin@hq.icb.chel.su (Serge A. Babkin) Date: Mon, 27 Mar 1995 09:49:49 -0600 (CST) Cc: davidg@Root.COM, freebsd-hackers@FreeBSD.org In-Reply-To: <199503272140.QAA06364@hq.icb.chel.su> from "Serge A. Babkin" at Mar 27, 95 04:40:26 pm X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 977 Sender: hackers-owner@FreeBSD.org Precedence: bulk Serge A. Babkin wrote: > > I have made another changes for 3C509 driver. In short the changes are: ... This reminds me, I have a 3C579 on a system here that is running -current (from about 3/26) and it fails to probe the card (has never successfully done so). My kernel configuration for the card is: device ep0 at isa? port 0x4000 net irq 12 vector epintr and I get this output during boot: Mar 26 19:56:26 luke /kernel: 1 3C5x9 board(s) on EISA found at 0x4000 Mar 26 19:56:26 luke /kernel: epprobe: interrupt number 4096 doesn't match Mar 26 19:56:26 luke /kernel: ep0 not found at 0x4000 Note that the card is in slot 4 and is configured to use IRQ 12. Any idea as to what is wrong or what I can do to get the probe to work? -- Bob Willcox ...!{rutgers|ames}!cs.utexas.edu!uudell!obiwan!bob Austin, TX or: @uudell.us.dell.com:obiwan!bob 512-258-4224 (home), 512-838-3914 (work) or: obiwan%bob@uunet.uu.net