Date: Sun, 14 Apr 2002 16:56:42 +0200 (CEST) From: Marc Fonvieille <marc@blackend.org> To: FreeBSD-gnats-submit@FreeBSD.org Subject: docs/37061: Extra-spaces and wrong indentation in laptop article Message-ID: <200204141456.g3EEugL37470@gothic.blackend.org>
index | next in thread | raw e-mail
>Number: 37061
>Category: docs
>Synopsis: Extra-spaces and wrong indentation in laptop article
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-doc
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: change-request
>Submitter-Id: current-users
>Arrival-Date: Sun Apr 14 08:00:03 PDT 2002
>Closed-Date:
>Last-Modified:
>Originator: Marc Fonvieille
>Release: FreeBSD 4.5-STABLE i386
>Organization:
>Environment:
System: FreeBSD gothic.blackend.org 4.5-STABLE FreeBSD 4.5-STABLE #23: Mon Mar 11 12:05:20 CET 2002 marc@gothic.blackend.org:/usr/src/sys/compile/GOTHIC i386
>Description:
Extra-spaces after each dot, and wrong indentation in the sgml source.
>How-To-Repeat:
>Fix:
--- article.sgml.diff begins here ---
--- article.sgml.org Sun Apr 14 10:01:48 2002
+++ article.sgml Sun Apr 14 16:48:50 2002
@@ -24,158 +24,161 @@
to different hardware requirements from desktops, are
discussed below.</para>
</abstract>
- </articleinfo>
+ </articleinfo>
<para>FreeBSD is often thought of as a server operating system, but
it works just fine on the desktop, and if you want to use it on
your laptop you can enjoy all the usual benefits: systematic
layout, easy administration and upgrading, the ports/packages
- system for adding software, and so on. (Its other benefits,
+ system for adding software, and so on. (Its other benefits,
such as stability, network performance, and performance under
a heavy load, may not be obvious on a laptop, of course.)
However, installing it on laptops often involves problems which
are not encountered on desktop machines and are not commonly
discussed (laptops, even more than desktops, are fine-tuned for
- Microsoft Windows). This article aims to discuss some of these
+ Microsoft Windows). This article aims to discuss some of these
issues.</para>
- <sect1>
- <title>XFree86</title>
+ <sect1>
+ <title>XFree86</title>
- <para>Recent versions of XFree86 work with most display adapters
- available on laptops these days. Acceleration may not be
- supported, but a generic SVGA configuration should work.</para>
-
- <para>Check your laptop documentation for which card you have,
- and check in the XFree86 documentation (or setup program)
- to see whether it is specifically supported. If it is not, use
- a generic device (do not go for a name which just looks
- similar). In XFree86 version 4, you can try your luck
- with the command <userinput>XFree86 -configure</userinput>
- which auto-detects a lot of configurations.</para>
-
- <para>The problem often is configuring the monitor. Common
- resources for XFree86 focus on CRT monitors; getting a
- suitable modeline for an LCD display may be tricky. You may
- be lucky and not need to specify a modeline, or just need to
- specify suitable HorizSync and VertRefresh ranges. If that
- does not work, the best option is to check web resources
- devoted to configuring X on laptops (these are often
- linux-oriented sites but it does not matter because both systems
- use XFree86) and copy a modeline posted by someone for similar
- hardware.</para>
-
- <para>Most laptops come with two buttons on their pointing
- devices, which is rather problematic in X (since the middle
- button is commonly used to paste text); you can map a
- simultaneous left-right click in your X configuration to
- a middle button click with the line</para>
-
-<programlisting>
-Option "Emulate3Buttons"
-</programlisting>
-
- <para>in the XF86Config file in the <literal>InputDevice</literal> section (for XFree86
- version 4; for version 3, put just the line <literal>Emulate3Buttons</literal>,
- without the quotes, in the <literal>Pointer</literal> section.)</para>
- </sect1>
-
- <sect1>
- <title>Modems</title>
- <para>
- Laptops usually come with internal (on-board) modems.
- Unfortunately, this almost always means they are <quote>winmodems</quote> whose
- functionality is implemented in software, for which only windows
- drivers are normally available (though a few drivers are beginning
- to show up for other operating systems). Otherwise, you
- need to buy an external modem: the most compact option is
- probably a PC-Card (PCMCIA) modem, discussed below, but
- serial or USB modems may be cheaper. Generally, regular
- modems (non-winmodems) should work fine.
- </para>
-
- </sect1>
-
- <sect1>
- <title>PCMCIA (PC-card) devices</title>
-
- <para> Most laptops come with PCMCIA (also called PC-card)
- slots; these are supported fine under FreeBSD. Look through
- your boot-up messages (using dmesg) and see whether these were
- detected correctly (they should appear as
- <devicename>pccard0</devicename>,
- <devicename>pccard1</devicename> etc on devices like
- <devicename>pcic0</devicename>).</para>
-
- <para>FreeBSD currently supports 16-bit PCMCIA cards, but not
- 32-bit (<quote>CardBus</quote>) cards. A database of supported cards is in
- the file <filename>/etc/defaults/pccard.conf</filename>. Look
- through it, and preferably buy cards listed there. Cards not
- listed may also work as <quote>generic</quote> devices: in particular most
- modems (16-bit) should work fine, provided they are not
- winmodems (these do exist even as PC-cards, so watch out). If
- your card is recognised as a generic modem, note that the
- default pccard.conf file specifies a delay time of 10 seconds
- (to avoid freezes on certain modems); this may well be
- over-cautious for your modem, so you may want to play with it,
- reducing it or removing it totally.</para>
-
- <para>Some parts of <filename>pccard.conf</filename> may need editing. Check the irq
- line, and be sure to remove any number already being used: in
- particular, if you have an on board sound card, remove irq 5
- (otherwise you may experience hangs when you insert a card).
- Check also the available memory slots; if your card is not
- being detected, try changing it to one of the other allowed
- values (listed in the man page &man.pccardc.8;).
- </para>
-
- <para>If it is not running already, start the pccardd daemon.
- (To enable it at boot time, add
- <programlisting>pccard_enable="YES"</programlisting> to
- <filename>/etc/rc.conf</filename>). Now your cards should be
- detected when you insert and remove them, and you should get
- log messages about new devices being enabled.</para>
-
- <para>There have been major changes to the pccard code
- (including ISA routing of interrupts, for machines whose
- PCIBIOS FreeBSD can not seem to use) before the FreeBSD 4.4
- release. If you have problems, try upgrading your system.</para>
+ <para>Recent versions of XFree86 work with most display adapters
+ available on laptops these days. Acceleration may not be
+ supported, but a generic SVGA configuration should work.</para>
+
+ <para>Check your laptop documentation for which card you have,
+ and check in the XFree86 documentation (or setup program)
+ to see whether it is specifically supported. If it is not, use
+ a generic device (do not go for a name which just looks
+ similar). In XFree86 version 4, you can try your luck
+ with the command <userinput>XFree86 -configure</userinput>
+ which auto-detects a lot of configurations.</para>
+
+ <para>The problem often is configuring the monitor. Common
+ resources for XFree86 focus on CRT monitors; getting a
+ suitable modeline for an LCD display may be tricky. You may
+ be lucky and not need to specify a modeline, or just need to
+ specify suitable HorizSync and VertRefresh ranges. If that
+ does not work, the best option is to check web resources
+ devoted to configuring X on laptops (these are often
+ linux-oriented sites but it does not matter because both systems
+ use XFree86) and copy a modeline posted by someone for similar
+ hardware.</para>
+
+ <para>Most laptops come with two buttons on their pointing
+ devices, which is rather problematic in X (since the middle
+ button is commonly used to paste text); you can map a
+ simultaneous left-right click in your X configuration to
+ a middle button click with the line</para>
+
+ <programlisting>
+ Option "Emulate3Buttons"
+ </programlisting>
+
+ <para>in the XF86Config file in the <literal>InputDevice</literal>
+ section (for XFree86 version 4; for version 3, put just the line
+ <literal>Emulate3Buttons</literal>, without the quotes, in the
+ <literal>Pointer</literal> section.)</para>
+ </sect1>
+
+ <sect1>
+ <title>Modems</title>
+ <para>
+ Laptops usually come with internal (on-board) modems.
+ Unfortunately, this almost always means they are
+ <quote>winmodems</quote> whose
+ functionality is implemented in software, for which only windows
+ drivers are normally available (though a few drivers are beginning
+ to show up for other operating systems). Otherwise, you
+ need to buy an external modem: the most compact option is
+ probably a PC-Card (PCMCIA) modem, discussed below, but
+ serial or USB modems may be cheaper. Generally, regular
+ modems (non-winmodems) should work fine.
+ </para>
+
+ </sect1>
+
+ <sect1>
+ <title>PCMCIA (PC-card) devices</title>
+
+ <para> Most laptops come with PCMCIA (also called PC-card)
+ slots; these are supported fine under FreeBSD. Look through
+ your boot-up messages (using dmesg) and see whether these were
+ detected correctly (they should appear as
+ <devicename>pccard0</devicename>,
+ <devicename>pccard1</devicename> etc on devices like
+ <devicename>pcic0</devicename>).</para>
+
+ <para>FreeBSD currently supports 16-bit PCMCIA cards, but not
+ 32-bit (<quote>CardBus</quote>) cards. A database of supported
+ cards is in the file <filename>/etc/defaults/pccard.conf</filename>.
+ Look through it, and preferably buy cards listed there. Cards not
+ listed may also work as <quote>generic</quote> devices: in
+ particular most modems (16-bit) should work fine, provided they
+ are not winmodems (these do exist even as PC-cards, so watch out).
+ If your card is recognised as a generic modem, note that the
+ default pccard.conf file specifies a delay time of 10 seconds
+ (to avoid freezes on certain modems); this may well be
+ over-cautious for your modem, so you may want to play with it,
+ reducing it or removing it totally.</para>
+
+ <para>Some parts of <filename>pccard.conf</filename> may need
+ editing. Check the irq line, and be sure to remove any number
+ already being used: in particular, if you have an on board sound
+ card, remove irq 5 (otherwise you may experience hangs when you
+ insert a card). Check also the available memory slots; if your
+ card is not being detected, try changing it to one of the other
+ allowed values (listed in the man page &man.pccardc.8;).
+ </para>
+
+ <para>If it is not running already, start the pccardd daemon.
+ (To enable it at boot time, add
+ <programlisting>pccard_enable="YES"</programlisting> to
+ <filename>/etc/rc.conf</filename>). Now your cards should be
+ detected when you insert and remove them, and you should get
+ log messages about new devices being enabled.</para>
+
+ <para>There have been major changes to the pccard code
+ (including ISA routing of interrupts, for machines whose
+ PCIBIOS FreeBSD can not seem to use) before the FreeBSD 4.4
+ release. If you have problems, try upgrading your system.</para>
- </sect1>
+ </sect1>
- <sect1>
+ <sect1>
- <title>Power management</title>
+ <title>Power management</title>
- <para>Unfortunately, this is not very reliably supported under
- FreeBSD. If you are lucky, some functions may work reliably;
- or they may not work at all.</para>
-
- <para>To enable this, you may need to compile a kernel with
- power management support (<literal>device apm0</literal>) or
- add the option <literal>enable apm0</literal> to <filename>/boot/loader.conf</filename>, and
- also enable the apm daemon at boot time (line
- <literal>apm_enable="YES"</literal> in
- <filename>/etc/rc.conf</filename>). The apm commands are
- listed in the &man.apm.8; manpage. For instance,
- <command>apm -b</command> gives you battery status (or 255 if
- not supported), <command>apm -Z</command> puts the laptop on
- standby, <command>apm -z</command> (or zzz) suspends it. To
- shutdown and power off the machine, use <command>shutdown -p</command>.
- Again, some or all of these functions may not work very well
- or at all. You may find that laptop suspension/standby works
- in console mode but not under X (that is, the screen does not
- come on again; in that case, switch to a virtual console
- (using Ctrl-Alt-F1 or another function key) and then execute
- the apm command.
- </para>
-
- <para>The X window system (XFree86) also includes display power
- management (look at the &man.xset.1; man page, and search for
- dpms there). You may want to investigate this. However, this,
- too, works inconsistently on laptops: it
- often turns off the display but does not turn off the
- backlight.</para>
+ <para>Unfortunately, this is not very reliably supported under
+ FreeBSD. If you are lucky, some functions may work reliably;
+ or they may not work at all.</para>
+
+ <para>To enable this, you may need to compile a kernel with
+ power management support (<literal>device apm0</literal>) or
+ add the option <literal>enable apm0</literal> to
+ <filename>/boot/loader.conf</filename>, and
+ also enable the apm daemon at boot time (line
+ <literal>apm_enable="YES"</literal> in
+ <filename>/etc/rc.conf</filename>). The apm commands are
+ listed in the &man.apm.8; manpage. For instance,
+ <command>apm -b</command> gives you battery status (or 255 if
+ not supported), <command>apm -Z</command> puts the laptop on
+ standby, <command>apm -z</command> (or zzz) suspends it. To
+ shutdown and power off the machine, use <command>shutdown -p</command>.
+ Again, some or all of these functions may not work very well
+ or at all. You may find that laptop suspension/standby works
+ in console mode but not under X (that is, the screen does not
+ come on again; in that case, switch to a virtual console
+ (using Ctrl-Alt-F1 or another function key) and then execute
+ the apm command.
+ </para>
+
+ <para>The X window system (XFree86) also includes display power
+ management (look at the &man.xset.1; man page, and search for
+ dpms there). You may want to investigate this. However, this,
+ too, works inconsistently on laptops: it
+ often turns off the display but does not turn off the
+ backlight.</para>
- </sect1>
+ </sect1>
</article>
--- article.sgml.diff ends here ---
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-doc" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200204141456.g3EEugL37470>