Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 23 Aug 1997 21:15:52 +0200
From:      Dirk Froemberg <dirk@activ-consult.de>
To:        smp@freebsd.org
Subject:   SMP on a ASUS P65UP5?!
Message-ID:  <19970823211552.26652@activ-consult.de>

next in thread | raw e-mail | index | archive | help

--17pEHd4RhPHOinZp
Content-Type: text/plain; charset=us-ascii

Hello!

Has anybody run FreeBSD-SMP successfully on a ASUS P65UP5 with
C-P6ND (Dual Pentium Pro Card)?

After booting from a SMP-GENERIC-kernel from 3.0-970815-SNAP the
machine hangs for a few minutes after

	APIC_IO: routing 8254 via 8259 on pin 0	.

Then

	Timedout SCB handled by another timeout

is printed on the console twice.

After another few minutes timeouts concerning ahc0 and sd0 are printed.

The output from mptable -verbose -dmesg is attached below.

Any ideas?

	Best regards Dirk

-- 
--------------------------------------------------------------
Dirk Froemberg                              ACTIV-CONSULT GmbH
                                         Online Service Center
                                            Nordhauser Str. 30
                                                  10589 Berlin          
mailto:dirk.froemberg@activ-consult.de    FON +49-30-34602-272
http://www.activ-consult.de/              FAX +49-30-34602-222                  
--------------------------------------------------------------

--17pEHd4RhPHOinZp
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="mptable.out"


===============================================================================

MPTable, version 2.0.13

 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00
 searching CMOS 'top of mem' @ 0x0009f800 (638K)
 searching default 'top of mem' @ 0x0009fc00 (639K)
 searching BIOS @ 0x000f0000

 MP FPS found in BIOS @ physical addr: 0x000f60b0

-------------------------------------------------------------------------------

MP Floating Pointer Structure:

  location:			BIOS
  physical address:		0x000f60b0
  signature:			'_MP_'
  length:			16 bytes
  version:			1.1
  checksum:			0x8e
  mode:				Virtual Wire

-------------------------------------------------------------------------------

MP Config Table Header:

  physical address:		0x000f5caa
  signature:			'PCMP'
  base table length:		244
  version:			1.1
  checksum:			0x42
  OEM ID:			'OEM00000'
  Product ID:			'PROD00000000'
  OEM table pointer:		0x00000000
  OEM table size:		0
  entry count:			22
  local APIC address:		0xfee00000
  extended table length:	0
  extended table checksum:	0

-------------------------------------------------------------------------------

MP Config Base Table Entries:

--
Processors:	APIC ID	Version	State		Family	Model	Step	Flags
		 1	 0x11	 BSP, usable	 6	 1	 9	 0xfbff
		 0	 0x11	 AP, usable	 6	 1	 9	 0xfbff
--
Bus:		Bus ID	Type
		 0	 PCI   
		 1	 ISA   
--
I/O APICs:	APIC ID	Version	State		Address
		 2	 0x11	 usable		 0xfec00000
--
I/O Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	INT#
		ExtINT	 conforms    conforms	     1	   0	      2	   0
		INT	 conforms    conforms	     1	   1	      2	   1
		INT	 conforms    conforms	     1	   0	      2	   2
		INT	 conforms    conforms	     1	   3	      2	   3
		INT	 conforms    conforms	     1	   4	      2	   4
		INT	 conforms    conforms	     1	   5	      2	   5
		INT	 conforms    conforms	     1	   6	      2	   6
		INT	 conforms    conforms	     1	   7	      2	   7
		INT	 conforms    conforms	     1	   8	      2	   8
		INT	 conforms    conforms	     1	  10	      2	  10
		INT	 conforms    conforms	     1	  12	      2	  12
		INT	 conforms    conforms	     1	  14	      2	  14
		INT	 conforms    conforms	     1	  15	      2	  15
		INT	active-lo       level	     1	  11	      2	  17
		INT	active-lo       level	     1	   9	      2	  19
--
Local Ints:	Type	Polarity    Trigger	Bus ID	 IRQ	APIC ID	INT#
		ExtINT	active-hi        edge	     1	   0	    255	   0
		NMI	active-hi        edge	     1	   0	    255	   1

-------------------------------------------------------------------------------

# SMP kernel config file options:


# Required:
options		SMP			# Symmetric MultiProcessor Kernel
options		APIC_IO			# Symmetric (APIC) I/O

# Useful:
#options		SMP_AUTOSTART		# start the additional CPUs during boot

# Optional (built-in defaults will work in most cases):
#options		NCPU=2			# number of CPUs
#options		NBUS=2			# number of busses
#options		NAPIC=1			# number of IO APICs
#options		NINTR=24		# number of INTs

-------------------------------------------------------------------------------

dmesg output:

Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 3.0-970815-SNAP #0: Fri Aug 15 09:33:39 GMT 1997
    root@make.ican.net:/usr/src/sys/compile/GENERIC
CPU: Pentium Pro (199.43-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping=9
  Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory  = 68091904 (66496K bytes)
avail memory = 63680512 (62188K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0
chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.1.0
ide_pci0: <Intel PIIX3 Bus-master IDE controller> rev 0x00 on pci0.1.1
ahc0: <Adaptec 2940 SCSI host adapter> rev 0x00 int a irq 11 on pci0.11.0
ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <QUANTUM LIGHTNING 730S 241E> type 0 fixed SCSI 2
sd0: Direct-Access 699MB (1431760 512 byte sectors)
vga0: <VGA-compatible display device> rev 0x01 int a irq 9 on pci0.13.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0: disabled, not probed.
fe0: disabled, not probed.
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1: disabled, not probed.
mse0: disabled, not probed.
psm0: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0: disabled, not probed.
wdc1: disabled, not probed.
bt0: disabled, not probed.
uha0: disabled, not probed.
aha0: disabled, not probed.
aic0: disabled, not probed.
nca0: disabled, not probed.
nca1: disabled, not probed.
sea0: disabled, not probed.
wt0: disabled, not probed.
mcd0: disabled, not probed.
matcdc0: disabled, not probed.
scd0: disabled, not probed.
ie0: disabled, not probed.
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: aui/utp/bnc[*BNC*] address 00:60:97:3d:e5:c2
ex0: disabled, not probed.
le0: disabled, not probed.
lnc0: disabled, not probed.
ze0: disabled, not probed.
zp0: disabled, not probed.
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
changing root device to sd0a

===============================================================================


--17pEHd4RhPHOinZp--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19970823211552.26652>