Date: Fri, 9 Sep 2005 11:29:47 +0100 (BST) From: "Dominic Marks" <dom@helenmarks.co.uk> To: freebsd-hackers@freebsd.org Cc: dominic.marks@graphdata.co.uk Subject: FreeBSD 6.0-BETA4 panics when when configuring pfsync0 Message-ID: <2845.195.12.22.194.1126261787.squirrel@www.helenmarks.co.uk>
next in thread | raw e-mail | index | archive | help
Hello,
I am setting up a redundant firewall setup for our company, the systems
are identically configured Dell servers running FreeBSD 6.0-BETA4.
Software being used is pf, carp, pfsync and altq.
When I attempt to configure the pfsync0 interface the systems panic. The
systems currently have HTT enabled, I've googled but I didn't find
anything to suggest pfsync was not SMP/HTT friendly. Could this be a
configuration problem?
interface:
# ifconfig em2
em2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 172.16.254.2 netmask 0xffffff00 broadcast 172.16.254.255
ether 00:04:23:bd:7a:ef
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
command:
# ifconfig pfsync0 syncdev em2 syncpeer 172.16.254.1
panic message:
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x24
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc067bfdc
stack pointer = 0x28:0xcca18aa0
frame pointer = 0x28:0xcca18ab4
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 84 (swi4: clock sio)
trap number = 12
panic: page fault
cpuid = 0
Uptime: 17m1s
Dumping 255 MB (2 chunks)
backtrace:
#0 doadump () at pcpu.h:165
165 pcpu.h: No such file or directory.
in pcpu.h
(kgdb) bt
#0 doadump () at pcpu.h:165
#1 0xc065b55d in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:397
#2 0xc065b881 in panic (fmt=0xc0854645 "%s")
at /usr/src/sys/kern/kern_shutdown.c:553
#3 0xc080cdfc in trap_fatal (frame=0xcca18a60, eva=36)
at /usr/src/sys/i386/i386/trap.c:841
#4 0xc080c5b6 in trap (frame=
{tf_fs = 8, tf_es = 40, tf_ds = 40, tf_edi = -1043696512, tf_esi =
-106424 5856, tf_ebp = -861828428, tf_isp =
-861828468, tf_ebx = -1051017216, tf_edx = -
1043696512, tf_ecx = -1051126400, tf_eax = 0, tf_trapno = 12,
tf_err = 0, tf_eip = -1066942500, tf_cs =
32, tf_eflags = 65670, tf_esp = 52, tf_ss = 0})
at /usr/src/sys/i386/i386/trap.c:272
#5 0xc07fa5ca in calltrap () at /usr/src/sys/i386/i386/exception.s:139
#6 0x00000008 in ?? ()
#7 0x00000028 in ?? ()
#8 0x00000028 in ?? ()
#9 0xc1ca7480 in ?? ()
#10 0xc090e5a0 in pfi_buffer_max ()
#11 0xcca18ab4 in ?? ()
#12 0xcca18a8c in ?? ()
#13 0xc15ac000 in ?? ()
#14 0xc1ca7480 in ?? ()
#15 0xc1591580 in ?? ()
#16 0x00000000 in ?? ()
#17 0x0000000c in ?? ()
#18 0x00000000 in ?? ()
#19 0xc067bfdc in propagate_priority (td=0xc1ca7480)
at /usr/src/sys/kern/subr_turnstile.c:234
#20 0xc067c8f1 in turnstile_wait (lock=0xc090e5a0, owner=0xc1ca7480)
at /usr/src/sys/kern/subr_turnstile.c:629
#21 0xc0652cb0 in _mtx_lock_sleep (m=0xc090e5a0, tid=3243950080, opts=0,
file=0x0, line=0) at /usr/src/sys/kern/kern_mutex.c:549
#22 0xc04768ed in pf_test (dir=2, ifp=0xc16ae000, m0=0xcca18c18, eh=0x0,
inp=0x0) at /usr/src/sys/contrib/pf/net/pf.c:6284
#23 0xc047f74b in pf_check_out (arg=0x0, m=0xcca18c18, ifp=0xc16ae000, dir=2,
inp=0x0) at /usr/src/sys/contrib/pf/net/pf_ioctl.c:3386
#24 0xc06d1837 in pfil_run_hooks (ph=0xc0934740, mp=0xcca18c8c,
ifp=0xc16ae000, dir=2, inp=0x0) at /usr/src/sys/net/pfil.c:139
#25 0xc06f7172 in ip_output (m=0xc177e900, opt=0xc177e988, ro=0xcca18c58,
flags=2, imo=0xc16e3e08, inp=0x0) at /usr/src/sys/netinet/ip_output.c:666
#26 0xc0469dc2 in pfsync_senddef (arg=0xc16e3e00)
at /usr/src/sys/contrib/pf/net/if_pfsync.c:1829
#27 0xc0667bea in softclock (dummy=0x0) at
/usr/src/sys/kern/kern_timeout.c:295
#28 0xc0646d11 in ithread_loop (arg=0xc15bc480)
at /usr/src/sys/kern/kern_intr.c:545
#29 0xc0645dd5 in fork_exit (callout=0xc0646bc4 <ithread_loop>,
arg=0xc15bc480, frame=0xcca18d38) at /usr/src/sys/kern/kern_fork.c:789
#30 0xc07fa62c in fork_trampoline () at
/usr/src/sys/i386/i386/exception.s:208
dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA4 #1: Tue Sep 6 15:44:57 BST 2005
root@HOSTNAME:/usr/obj/usr/src/sys/FIREWALL
ACPI APIC Table: <DELL PESC1425>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.12-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACP
I,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
Hyperthreading: 2 logical CPUs
real memory = 268173312 (255 MB)
avail memory = 252772352 (241 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 4
ioapic2: WARNING: intbase 64 != expected base 56
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PESC1425> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 3 on acpi0
pci_link5: <ACPI PCI Link LNKF> on acpi0
pci_link6: <ACPI PCI Link LNKG> on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 6 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xecc0-0xecff mem 0xdfde0000-0xdfdfffff irq
32 at device 4.0 on pci2
em0: Ethernet address: 00:14:22:72:7c:73
em0: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xdcc0-0xdcff mem 0xdfbe0000-0xdfbfffff,0xd
fb80000-0xdfbbffff irq 66 at device 7.0 on pci3
em1: Ethernet address: 00:04:23:bd:79:0a
em1: Speed:N/A Duplex:N/A
em2: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xdc80-0xdcbf mem 0xdfbc0000-0xdfbdffff,0xd
fb40000-0xdfb7ffff irq 67 at device 7.1 on pci3
em2: Ethernet address: 00:04:23:bd:79:0b
em2: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver
attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff irq
16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf irq
19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff00000-0xdff003ff irq
23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
em3: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xccc0-0xccff mem 0xdf7e0000-0xdf7fffff irq
20 at device 3.0 on pci4
em3: Ethernet address: 00:14:22:72:7c:74
em3: Speed:N/A Duplex:N/A
pci4: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.
1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xbcb8-0xbcbf,0xbcb0-0xbcb3,0xbca0-0xbca7,0xbc98-0xbc9b,0xbc80-
0xbc8f irq 18 at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <HL-DT-ST GCR-8240N/1.06> at ata0-master UDMA33
ad4: 152587MB <Maxtor 6Y160M0 YAR51HW0> at ata2-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
A debug kernel and core file (45MB) are available to developers interested
in investigating the problem. Mail me for access.
Thanks,
--
Dominic Marks
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2845.195.12.22.194.1126261787.squirrel>