Date: Wed, 26 Jun 1996 13:29:58 +0100 (BST) From: Developer <dev@fgate.flevel.co.uk> To: "Jordan K. Hubbard" <jkh@time.cdrom.com> Cc: hackers@freebsd.org Subject: Re: BSD V2.2 Message-ID: <Pine.BSI.3.93.960626132800.13679A-100000@fgate.flevel.co.uk> In-Reply-To: <17770.835783296@time.cdrom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 26 Jun 1996, Jordan K. Hubbard wrote: > Uh, this is an utterly insane kernel configuration file. You started > with LINT, didn't you? Not a good idea - those options aren't meant > to work all at the same time, it's just a reference. Use GENERIC and > go from there. Ive tried a new configuration built from GENERIC, but it still reboots the same:( Any ideas? THanks. Trefor S. # # Tref's config # # $Id: TREF,v 1.70 1996/05/13 04:29:13 nate Exp $ # machine "i386" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident TREF maxusers 48 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative #Options for routing options GATEWAY options MROUTING #kernel tracing options KTRACE #compat/other options options COMPAT_LINUX options QUOTA config kernel root on wd0 controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc) is sufficient # for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller aic0 at isa? port 0x340 bio irq 11 vector aicintr controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 device sd0 device od0 device st0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5 #options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # PCCARD (PCMCIA) support #controller crd0 #device pcic0 at crd? #device pcic1 at crd? device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty device lpt2 at isa? port? tty device mse0 at isa? port 0x23c tty irq 5 vector mseintr device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 device fxp0 device vx0 device ed0 at isa? port 0x260 net irq 3 iomem 0xd8000 vector edintr device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr device ep0 at isa? port 0x300 net irq 10 vector epintr device fe0 at isa? port 0x300 net irq ? vector feintr device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device bpfilter 4 pseudo-device ether pseudo-device log pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 8 pseudo-device sppp pseudo-device tun 8 pseudo-device pty 64 # keep this if you want to be able to continue to use /stand/sysinstall pseudo-device gzip # Exec gzipped a.out's
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.93.960626132800.13679A-100000>