Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 12 May 2015 15:33:42 -0300
From:      Luiz Otavio O Souza <lists.br@gmail.com>
To:        Dan Raymond <draymond@foxvalley.net>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: state of FreeBSD ARM (less stable than 6 months ago)
Message-ID:  <CAB=2f8zYShMH1P96MsdfP0ReMEwpkDJ%2Bq8dvMHHHjiMGmqnrqg@mail.gmail.com>
In-Reply-To: <555177D9.8080001@foxvalley.net>
References:  <5550C252.6030001@foxvalley.net> <1431357226.2428197.265704673.6A544F74@webmail.messagingengine.com> <555177D9.8080001@foxvalley.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On 12 May 2015 at 00:47, Dan Raymond wrote:
> On 5/11/2015 9:13 AM, Mark Felder wrote:
>>
>> On Mon, May 11, 2015, at 09:53, Dan Raymond wrote:
>>>
>>> I've been running an email and web server using FreeBSD 11 on a
>>> Raspberry Pi B+ since November.  It has crashed 3 times since then
>>> (roughly every two months).  I'm currently running r277334.  I thought
>>> I'd try the latest build to see if stability has improved. I purchased a
>>> Raspberry Pi 2 and used the latest crochet to built r282738.  No
>>> problems building it and it booted up fine.  However, it crashes about
>>> an hour into building some ports I use for my server (nginx, php,
>>> etc.).  I tried twice last night and it crashed both times.  Is anybody
>>> looking into these stability issues?
>>>
>> RPi2 support is something like less than a week old for SMP and DMA
>> transport. I'm not sure more than a handful of people have actually
>> tried it yet. The bugs here will be worked out in time, but if you have
>> any core dumps or info that can assist in tracking down issues you're
>> experiencing that would certainly be appreciated.
>>
>
> These panics always seem to be mmcsd related.  I doubt it has anything to do
> with RPi2 or SMP.
>
> sdhci_bcm0-slot0:  Controller timeout
> sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
> sdhci_bcm0-slot0: Sys addr: 0x4d295a00 | Version:  0x00009902
> sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000020
> sdhci_bcm0-slot0: Argument: 0x002d19c0 | Trn mode: 0x0000193a
> sdhci_bcm0-slot0: Present:  0x01ff0506 | Host ctl: 0x00000003
> sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
> sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00000507
> sdhci_bcm0-slot0: Timeout:  0x0000000e | Int stat: 0x00000010
> sdhci_b
>
>
>
> mmcsd0: Error indicated: 1 Timeout
> g_vfs_done():mmcsd0s2a[WRITE(offset=1460830208, length=24576)]error = 5
> panic: No b_bufobj 0xd767ca00
> cpuid = 1
> KDB: enter: panic
> [ thread pid 12 tid 100013 ]
> Stopped at      $d.7:   ldrb   r15, [r15, r15, ror r15]!
> db>

Hm, I have seen this already, it is the sdhci software timeout.

The 'happens at night' part rings a bell for me.

In my case it happened only with a card that has failed a few weeks
later, so I thought it was a pre-fail case.

But in certain cases (depending on the card) I think this timeout can
be triggered with normal usage.

Please try the attached patch and let me know if it works for you.

Luiz

Index: sys/dev/sdhci/sdhci.c
===================================================================
--- sys/dev/sdhci/sdhci.c       (revision 282210)
+++ sys/dev/sdhci/sdhci.c       (working copy)
@@ -872,7 +872,7 @@
        /* Start command. */
        WR2(slot, SDHCI_COMMAND_FLAGS, (cmd->opcode << 8) | (flags & 0xff));
        /* Start timeout callout. */
-       callout_reset(&slot->timeout_callout, 2*hz, sdhci_timeout, slot);
+       callout_reset(&slot->timeout_callout, 10*hz, sdhci_timeout, slot);
 }

 static void



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB=2f8zYShMH1P96MsdfP0ReMEwpkDJ%2Bq8dvMHHHjiMGmqnrqg>