From owner-freebsd-hackers Thu Aug 28 08:00:21 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id IAA02431 for hackers-outgoing; Thu, 28 Aug 1997 08:00:21 -0700 (PDT) Received: from icicle.winternet.com (adm@icicle.winternet.com [198.174.169.13]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id IAA02420 for ; Thu, 28 Aug 1997 08:00:14 -0700 (PDT) Received: (from adm@localhost) by icicle.winternet.com (8.8.7/8.8.6) id KAA05298 for ; Thu, 28 Aug 1997 10:00:10 -0500 (CDT) Received: from tundra.winternet.com(198.174.169.11) by icicle.winternet.com via smap (V2.0) id xma005240; Thu, 28 Aug 97 09:59:36 -0500 Received: from localhost (mestery@localhost) by tundra.winternet.com (8.8.4/8.8.4) with SMTP id JAA26827 for ; Thu, 28 Aug 1997 09:59:36 -0500 (CDT) X-Authentication-Warning: tundra.winternet.com: mestery owned process doing -bs Date: Thu, 28 Aug 1997 09:59:35 -0500 (CDT) From: Kyle Mestery To: freebsd-hackers@freebsd.org Subject: Sig 12's with user PPP Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-hackers@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi all. I am running 3.0 from this weekend and a kernel from Tuesday, but this problem has been affecting me off and on since June. The problem is that I get Sig 12's with user PPP some of the time. It seems to happen like this. I start user PPP, login to my ISP for the first time, log off, no sig12. Then, right away afterwards, I login again, and if I log off within 2-3 minutes, right after disconnecting I get a sig12. Also, the second time I log in if I dont wait at least 5 minutes, my routing table is all screwed up and I have to logout before anything works. Like I said, this has been happening since about June. I am runnign the SMP kernel, and tonite I am going to try a UP kernel to see if this occurs. The problem with the routing table should be independant of which kernel I run though, right? Also, is there any way (besides a remote serial console) I can get to the debugger from X? And, is there any way other than copying by hand the trace output to save a trace output? thanks! Kyle Mestery StorageTek's Network Systems Group 7600 Boone Ave. N., Brooklyn Park, MN 55428 mesteka@anubis.network.com, mestery@winternet.com