Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Apr 2005 19:40:20 +0200
From:      Marc Olzheim <marcolz@stack.nl>
To:        freebsd-stable@freebsd.org
Subject:   Reproducible panic 5.4-stable when booting with -v
Message-ID:  <20050427174020.GA6256@stack.nl>
In-Reply-To: <20050427153023.GA5786@stack.nl>
References:  <20050427153023.GA5786@stack.nl>

next in thread | previous in thread | raw e-mail | index | archive | help

--ZoaI/ZTpAVc4A5k6
Content-Type: multipart/mixed; boundary="jI8keyz6grp/JLjh"
Content-Disposition: inline


--jI8keyz6grp/JLjh
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

The same system about which I just mailed, crashes when booting with
verbose logging enabled. With a normal boot, everything's ok...

Marc

--jI8keyz6grp/JLjh
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="ttyS22.data.noverbose"
Content-Transfer-Encoding: quoted-printable

KDB: debugger backends: ddb=0D
KDB: current backend: ddb=0D
131072K of memory above 4GB ignored=0D
Copyright (c) 1992-2005 The FreeBSD Project.=0D
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0D
	The Regents of the University of California. All rights reserved.=0D
FreeBSD 5.4-STABLE #8: Wed Apr 27 18:19:02 CEST 2005=0D
    root@rave.ilse.net:/usr/obj/usr/src/sys/SE3DEBUG=0D
WARNING: WITNESS option enabled, expect reduced performance.=0D
ACPI APIC Table: <PTLTD  	 APIC  >=0D
Timecounter "i8254" frequency 1193182 Hz quality 0=0D
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3199.11-MHz 686-class CPU)=0D
  Origin =3D "GenuineIntel"  Id =3D 0xf25  Stepping =3D 5=0D
  Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0D
  Hyperthreading: 2 logical CPUs=0D
real memory  =3D 4160225280 (3967 MB)=0D
avail memory =3D 4073390080 (3884 MB)=0D
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs=0D
 cpu0 (BSP): APIC ID:  0=0D
 cpu1 (AP): APIC ID:  1=0D
 cpu2 (AP): APIC ID:  6=0D
 cpu3 (AP): APIC ID:  7=0D
ioapic0 <Version 2.0> irqs 0-23 on motherboard=0D
ioapic1 <Version 2.0> irqs 24-47 on motherboard=0D
ioapic2 <Version 2.0> irqs 48-71 on motherboard=0D
npx0: <math processor> on motherboard=0D
npx0: INT 16 interface=0D
acpi0: <PTLTD   RSDT> on motherboard=0D
acpi0: Power Button (fixed)=0D
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0D
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0=0D
cpu0: <ACPI CPU (2 Cx states)> on acpi0=0D
cpu1: <ACPI CPU (2 Cx states)> on acpi0=0D
cpu2: <ACPI CPU (2 Cx states)> on acpi0=0D
cpu3: <ACPI CPU (2 Cx states)> on acpi0=0D
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0D
pci0: <ACPI PCI bus> on pcib0=0D
pci0: <unknown> at device 0.1 (no driver attached)=0D
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0=0D
pci1: <ACPI PCI bus> on pcib1=0D
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver att=
ached)=0D
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1=0D
pci2: <ACPI PCI bus> on pcib2=0D
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3000-0=
x303f mem 0xfc200000-0xfc21ffff irq 54 at device 3.0 on pci2=0D
em0: Ethernet address: 00:30:48:2b:4d:06=0D
em0:  Speed:N/A  Duplex:N/A=0D
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3040-0=
x307f mem 0xfc220000-0xfc23ffff irq 55 at device 3.1 on pci2=0D
em1: Ethernet address: 00:30:48:2b:4d:07=0D
em1:  Speed:N/A  Duplex:N/A=0D
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver att=
ached)=0D
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1=0D
pci3: <ACPI PCI bus> on pcib3=0D
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x4=
4ff mem 0xfc300000-0xfc301fff irq 28 at device 2.0 on pci3=0D
aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 101-133Mhz, 512 SCBs=0D
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4=
cff mem 0xfc302000-0xfc303fff irq 29 at device 2.1 on pci3=0D
aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 101-133Mhz, 512 SCBs=0D
pci0: <serial bus, USB> at device 29.0 (no driver attached)=0D
pci0: <serial bus, USB> at device 29.1 (no driver attached)=0D
pci0: <serial bus, USB> at device 29.2 (no driver attached)=0D
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0=0D
pci4: <ACPI PCI bus> on pcib4=0D
pci4: <display, VGA> at device 1.0 (no driver attached)=0D
isab0: <PCI-ISA bridge> at device 31.0 on pci0=0D
isa0: <ISA bus> on isab0=0D
atapci0: <Intel ICH3 UDMA100 controller> port 0x2060-0x206f,0x376,0x170-0x1=
77 at device 31.1 on pci0=0D
ata2: channel #0 on atapci0=0D
ata1: channel #1 on atapci0=0D
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)=0D
acpi_button0: <Power Button> on acpi0=0D
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0=0D
atkbd0: <AT Keyboard> irq 1 on atkbdc0=0D
kbd0 at atkbd0=0D
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp=
i0=0D
sio0: type 16550A, console=0D
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0=
=0D
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0D
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xca000-0xcafff,0xc9000-0x=
c9fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0=0D
pmtimer0 on isa0=0D
sc0: <System console> at flags 0x100 on isa0=0D
sc0: VGA <16 virtual consoles, flags=3D0x100>=0D
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0D
Timecounters tick every 10.000 msec=0D
IPv6 packet filtering initialized, default to accept, logging disabled=0D
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default=
 to accept, logging disabled=0D
acd0: CDROM <CD-224E/1.9A> at ata1-master PIO4=0D
Waiting 5 seconds for SCSI devices to settle=0D
ses0 at ahd0 bus 0 target 6 lun 0=0D
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device =0D
ses0: 3.300MB/s transfers=0D
ses0: SAF-TE Compliant Device=0D
da0 at ahd0 bus 0 target 0 lun 0=0D
da0: <HITACHI DK32DJ-36MC D4D4> Fixed Direct Access SCSI-3 device =0D
da0: 3.300MB/s transfers, Tagged Queueing Enabled=0D
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)=0D
da2 at ahd0 bus 0 target 2 lun 0=0D
da2: <MAXTOR ATLAS10K4_146SCA DF90> Fixed Direct Access SCSI-3 device =0D
da2: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing=
 Enabled=0D
da2: 140299MB (287332384 512 byte sectors: 255H 63S/T 17885C)=0D
da1 at ahd0 bus 0 target 1 lun 0=0D
da1: <SEAGATE ST3146707LC 0003> Fixed Direct Access SCSI-3 device =0D
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing =
Enabled=0D
da1: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)=0D
SMP: AP CPU #1 Launched!=0D
SMP: AP CPU #2 Launched!=0D
SMP: AP CPU #3 Launched!=0D
Mounting root from ufs:/dev/da0s1a=0D
em0: Link is up 100 Mbps Full Duplex=0D
em1: Link is up 100 Mbps Full Duplex=0D
boot() called on cpu#0=0D
Waiting (max 60 seconds) for system process `vnlru' to stop...done=0D
Waiting (max 60 seconds) for system process `syncer' to stop...=0D
Syncing disks, vnodes remaining...1 1 1 1 1 1 0 0 0 0 done=0D
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done=0D
No buffers busy after final sync=0D
Uptime: 41m12s=0D
Shutting down ACPI=0D
    ACPI-0265: *** Error: Hardware never changed modes=0D
Rebooting...=0D
cpu_reset called on cpu#0=0D
cpu_reset: Stopping other CPUs=0D

--jI8keyz6grp/JLjh
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="ttyS22.data.verbose"
Content-Transfer-Encoding: quoted-printable

KDB: debugger backends: ddb=0D
KDB: current backend: ddb=0D
SMAP type=3D01 base=3D0000000000000000 len=3D000000000009f400=0D
SMAP type=3D02 base=3D000000000009f400 len=3D0000000000000c00=0D
SMAP type=3D02 base=3D00000000000e0000 len=3D0000000000020000=0D
SMAP type=3D01 base=3D0000000000100000 len=3D00000000f7df0000=0D
SMAP type=3D03 base=3D00000000f7ef0000 len=3D0000000000008000=0D
SMAP type=3D04 base=3D00000000f7ef8000 len=3D0000000000008000=0D
SMAP type=3D01 base=3D00000000f7f00000 len=3D0000000000080000=0D
SMAP type=3D02 base=3D00000000f7f80000 len=3D0000000000080000=0D
SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000010000=0D
SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000=0D
SMAP type=3D02 base=3D00000000ff800000 len=3D0000000000400000=0D
SMAP type=3D02 base=3D00000000fff00000 len=3D0000000000100000=0D
SMAP type=3D01 base=3D0000000100000000 len=3D0000000008000000=0D
131072K of memory above 4GB ignored=0D
Copyright (c) 1992-2005 The FreeBSD Project.=0D
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0D
	The Regents of the University of California. All rights reserved.=0D
FreeBSD 5.4-STABLE #8: Wed Apr 27 18:19:02 CEST 2005=0D
    root@rave.ilse.net:/usr/obj/usr/src/sys/SE3DEBUG=0D
WARNING: WITNESS option enabled, expect reduced performance.=0D
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0876000.=0D
Preloaded elf module "/boot/kernel/mem.ko" at 0xc08762e4.=0D
Preloaded elf module "/boot/kernel/io.ko" at 0xc087638c.=0D
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0876434.=0D
Table 'FACP' at 0xf7ef4519=0D
Table 'APIC' at 0xf7ef7eec=0D
MADT: Found table at 0xf7ef7eec=0D
MP Configuration Table version 1.4 found at 0xc009f9a0=0D
APIC: Using the MADT enumerator.=0D
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled=0D
SMP: Added CPU 0 (AP)=0D
MADT: Found CPU APIC ID 6 ACPI ID 1: enabled=0D
SMP: Added CPU 6 (AP)=0D
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled=0D
SMP: Added CPU 1 (AP)=0D
MADT: Found CPU APIC ID 7 ACPI ID 3: enabled=0D
SMP: Added CPU 7 (AP)=0D
ACPI APIC Table: <PTLTD  	 APIC  >=0D
Calibrating clock(s) ... i8254 clock: 1193354 Hz=0D
CLK_USE_I8254_CALIBRATION not specified - using default frequency=0D
Timecounter "i8254" frequency 1193182 Hz quality 0=0D
Calibrating TSC clock ... TSC clock: 3199109396 Hz=0D
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3199.11-MHz 686-class CPU)=0D
  Origin =3D "GenuineIntel"  Id =3D 0xf25  Stepping =3D 5=0D
  Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0D
  Hyperthreading: 2 logical CPUs=0D
real memory  =3D 4160225280 (3967 MB)=0D
Physical memory chunk(s):=0D
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)=0D
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)=0D
0x0000000000c28000 - 0x00000000f3909fff, 4073594880 bytes (994530 pages)=0D
0x00000000f7f00000 - 0x00000000f7f77fff, 491520 bytes (120 pages)=0D
avail memory =3D 4073390080 (3884 MB)=0D
APIC ID: physical 0, logical 0:0=0D
APIC ID: physical 1, logical 0:1=0D
APIC ID: physical 6, logical 0:2=0D
APIC ID: physical 7, logical 0:3=0D
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs=0D
 cpu0 (BSP): APIC ID:  0=0D
 cpu1 (AP): APIC ID:  1=0D
 cpu2 (AP): APIC ID:  6=0D
 cpu3 (AP): APIC ID:  7=0D
bios32: Found BIOS32 Service Directory header at 0xc00f6cd0=0D
bios32: Entry =3D 0xfd6a1 (c00fd6a1)  Rev =3D 0  Len =3D 1=0D
pcibios: PCI BIOS entry at 0xfd6a0+0x225=0D
pnpbios: Found PnP BIOS data at 0xc00f6d30=0D
pnpbios: Entry =3D f0000:975a  Rev =3D 1.0=0D
Other BIOS signatures found:=0D
APIC: CPU 0 has ACPI ID 0=0D
APIC: CPU 1 has ACPI ID 2=0D
APIC: CPU 2 has ACPI ID 1=0D
APIC: CPU 3 has ACPI ID 3=0D
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000=0D
ioapic0: Routing external 8259A's -> intpin 0=0D
ioapic0: intpin 0 -> ExtINT (edge, high)=0D
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)=0D
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)=0D
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)=0D
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)=0D
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)=0D
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)=0D
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)=0D
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)=0D
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)=0D
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)=0D
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)=0D
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)=0D
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)=0D
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)=0D
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)=0D
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)=0D
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)=0D
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)=0D
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)=0D
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)=0D
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)=0D
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)=0D
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)=0D
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec80000=0D
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)=0D
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)=0D
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)=0D
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)=0D
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)=0D
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)=0D
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)=0D
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)=0D
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)=0D
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)=0D
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)=0D
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)=0D
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)=0D
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)=0D
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)=0D
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)=0D
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)=0D
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)=0D
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)=0D
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)=0D
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)=0D
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)=0D
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)=0D
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)=0D
MADT: Found IO APIC ID 4, Interrupt 48 at 0xfec80400=0D
ioapic2: intpin 0 -> PCI IRQ 48 (level, low)=0D
ioapic2: intpin 1 -> PCI IRQ 49 (level, low)=0D
ioapic2: intpin 2 -> PCI IRQ 50 (level, low)=0D
ioapic2: intpin 3 -> PCI IRQ 51 (level, low)=0D
ioapic2: intpin 4 -> PCI IRQ 52 (level, low)=0D
ioapic2: intpin 5 -> PCI IRQ 53 (level, low)=0D
ioapic2: intpin 6 -> PCI IRQ 54 (level, low)=0D
ioapic2: intpin 7 -> PCI IRQ 55 (level, low)=0D
ioapic2: intpin 8 -> PCI IRQ 56 (level, low)=0D
ioapic2: intpin 9 -> PCI IRQ 57 (level, low)=0D
ioapic2: intpin 10 -> PCI IRQ 58 (level, low)=0D
ioapic2: intpin 11 -> PCI IRQ 59 (level, low)=0D
ioapic2: intpin 12 -> PCI IRQ 60 (level, low)=0D
ioapic2: intpin 13 -> PCI IRQ 61 (level, low)=0D
ioapic2: intpin 14 -> PCI IRQ 62 (level, low)=0D
ioapic2: intpin 15 -> PCI IRQ 63 (level, low)=0D
ioapic2: intpin 16 -> PCI IRQ 64 (level, low)=0D
ioapic2: intpin 17 -> PCI IRQ 65 (level, low)=0D
ioapic2: intpin 18 -> PCI IRQ 66 (level, low)=0D
ioapic2: intpin 19 -> PCI IRQ 67 (level, low)=0D
ioapic2: intpin 20 -> PCI IRQ 68 (level, low)=0D
ioapic2: intpin 21 -> PCI IRQ 69 (level, low)=0D
ioapic2: intpin 22 -> PCI IRQ 70 (level, low)=0D
ioapic2: intpin 23 -> PCI IRQ 71 (level, low)=0D
MADT: Interrupt override: source 0, irq 2=0D
ioapic0: Routing IRQ 0 -> intpin 2=0D
ioapic0: intpin 2 trigger: edge=0D
ioapic0: intpin 2 polarity: high=0D
MADT: Interrupt override: source 9, irq 9=0D
ioapic0: intpin 9 trigger: level=0D
ioapic0: intpin 9 polarity: high=0D
lapic0: Routing NMI -> LINT1=0D
lapic0: LINT1 trigger: edge=0D
lapic0: LINT1 polarity: active-high=0D
lapic6: Routing NMI -> LINT1=0D
lapic6: LINT1 trigger: edge=0D
lapic6: LINT1 polarity: active-high=0D
lapic1: Routing NMI -> LINT1=0D
lapic1: LINT1 trigger: edge=0D
lapic1: LINT1 polarity: active-high=0D
lapic7: Routing NMI -> LINT1=0D
lapic7: LINT1 trigger: edge=0D
lapic7: LINT1 polarity: active-high=0D
ioapic0 <Version 2.0> irqs 0-23 on motherboard=0D
ioapic1 <Version 2.0> irqs 24-47 on motherboard=0D
ioapic2 <Version 2.0> irqs 48-71 on motherboard=0D
cpu0 BSP:=0D
     ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff=0D
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff=0D
random: <entropy source, Software, Yarrow>=0D
mem: <memory>=0D
Pentium Pro MTRR support enabled=0D
io: <I/O>=0D
null: <null device, zero device>=0D
npx0: [FAST]=0D
npx0: <math processor> on motherboard=0D
npx0: INT 16 interface=0D
acpi0: <PTLTD   RSDT> on motherboard=0D
acpi0: [MPSAFE]=0D
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80031000=0D
pci_open(1a):	mode1res=3D0x80000000 (0x80000000)=0D
pci_cfgcheck:	device 0 [class=3D060000] [hdr=3D80] is there (id=3D254c8086)=
=0D
pcibios: BIOS version 2.10=0D
Found $PIR table, 24 entries at 0xc00fde40=0D
PCI-Only Interrupts: none=0D
Location  Bus Device Pin  Link  IRQs=0D
slot 1      2    1    A   0x68  3 4 5 7 10 11 12 14 15=0D
slot 1      2    1    B   0x68  3 4 5 7 10 11 12 14 15=0D
slot 1      2    1    C   0x68  3 4 5 7 10 11 12 14 15=0D
slot 1      2    1    D   0x68  3 4 5 7 10 11 12 14 15=0D
slot 10     2    3    A   0x68  3 4 5 7 10 11 12 14 15=0D
slot 10     2    3    B   0x68  3 4 5 7 10 11 12 14 15=0D
slot 10     2    3    C   0x68  3 4 5 7 10 11 12 14 15=0D
slot 10     2    3    D   0x68  3 4 5 7 10 11 12 14 15=0D
slot 3      2    2    A   0x68  3 4 5 7 10 11 12 14 15=0D
slot 3      2    2    B   0x68  3 4 5 7 10 11 12 14 15=0D
slot 3      2    2    C   0x68  3 4 5 7 10 11 12 14 15=0D
slot 3      2    2    D   0x68  3 4 5 7 10 11 12 14 15=0D
slot 2      3    1    A   0x68  3 4 5 7 10 11 12 14 15=0D
slot 2      3    1    B   0x68  3 4 5 7 10 11 12 14 15=0D
slot 2      3    1    C   0x68  3 4 5 7 10 11 12 14 15=0D
slot 2      3    1    D   0x68  3 4 5 7 10 11 12 14 15=0D
slot 5      3    2    A   0x68  3 4 5 7 10 11 12 14 15=0D
slot 5      3    2    B   0x68  3 4 5 7 10 11 12 14 15=0D
slot 5      3    2    C   0x68  3 4 5 7 10 11 12 14 15=0D
slot 5      3    2    D   0x68  3 4 5 7 10 11 12 14 15=0D
slot 6      3    3    A   0x68  3 4 5 7 10 11 12 14 15=0D
slot 6      3    3    B   0x68  3 4 5 7 10 11 12 14 15=0D
slot 6      3    3    C   0x68  3 4 5 7 10 11 12 14 15=0D
slot 6      3    3    D   0x68  3 4 5 7 10 11 12 14 15=0D
slot 11     3    4    A   0x68  3 4 5 7 10 11 12 14 15=0D
slot 11     3    4    B   0x68  3 4 5 7 10 11 12 14 15=0D
slot 11     3    4    C   0x68  3 4 5 7 10 11 12 14 15=0D
slot 11     3    4    D   0x68  3 4 5 7 10 11 12 14 15=0D
slot 3     17    1    A   0x63  3 4 5 7 10 11 12 14 15=0D
slot 3     17    1    B   0x63  3 4 5 7 10 11 12 14 15=0D
slot 3     17    1    C   0x63  3 4 5 7 10 11 12 14 15=0D
slot 3     17    1    D   0x63  3 4 5 7 10 11 12 14 15=0D
slot 4     18    1    A   0x63  3 4 5 7 10 11 12 14 15=0D
slot 4     18    1    B   0x63  3 4 5 7 10 11 12 14 15=0D
slot 4     18    1    C   0x63  3 4 5 7 10 11 12 14 15=0D
slot 4     18    1    D   0x63  3 4 5 7 10 11 12 14 15=0D
slot 7      4    1    A   0x60  3 4 5 7 10 11 12 14 15=0D
slot 7      4    1    B   0x60  3 4 5 7 10 11 12 14 15=0D
slot 7      4    1    C   0x60  3 4 5 7 10 11 12 14 15=0D
slot 7      4    1    D   0x60  3 4 5 7 10 11 12 14 15=0D
slot 8      4    2    A   0x61  3 4 5 7 10 11 12 14 15=0D
slot 8      4    2    B   0x61  3 4 5 7 10 11 12 14 15=0D
slot 8      4    2    C   0x61  3 4 5 7 10 11 12 14 15=0D
slot 8      4    2    D   0x61  3 4 5 7 10 11 12 14 15=0D
slot 9      4    3    A   0x62  3 4 5 7 10 11 12 14 15=0D
slot 9      4    3    B   0x62  3 4 5 7 10 11 12 14 15=0D
slot 9      4    3    C   0x62  3 4 5 7 10 11 12 14 15=0D
slot 9      4    3    D   0x62  3 4 5 7 10 11 12 14 15=0D
embedded    0   29    A   0x60  3 4 5 7 10 11 12 14 15=0D
embedded    0   29    B   0x63  3 4 5 7 10 11 12 14 15=0D
embedded    0   29    C   0x62  3 4 5 7 10 11 12 14 15=0D
embedded    0   31    A   0x62  3 4 5 7 10 11 12 14 15=0D
embedded    0   31    B   0x61  3 4 5 7 10 11 12 14 15=0D
AcpiOsDerivePciId: bus 0 dev 31 func 0=0D
AcpiOsDerivePciId: bus 0 dev 31 func 0=0D
acpi0: Power Button (fixed)=0D
AcpiOsDerivePciId: bus 0 dev 0 func 0=0D
AcpiOsDerivePciId: bus 0 dev 31 func 0=0D
ACPI timer: 1/0 1/0 1/1 1/0 1/1 1/0 1/0 1/0 1/0 1/0 -> 10=0D
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0D
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0=0D
cpu0: <ACPI CPU (2 Cx states)> on acpi0=0D
cpu1: <ACPI CPU (2 Cx states)> on acpi0=0D
cpu2: <ACPI CPU (2 Cx states)> on acpi0=0D
cpu3: <ACPI CPU (2 Cx states)> on acpi0=0D
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0D
ACPI PCI link initial configuration:=0D
pci0: <ACPI PCI bus> on pcib0=0D
pci0: physical bus=3D0=0D
found->	vendor=3D0x8086, dev=3D0x254c, revid=3D0x01=0D
	bus=3D0, slot=3D0, func=3D0=0D
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0D
	cmdreg=3D0x0106, statreg=3D0x0090, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
found->	vendor=3D0x8086, dev=3D0x2541, revid=3D0x01=0D
	bus=3D0, slot=3D0, func=3D1=0D
	class=3Dff-00-00, hdrtype=3D0x00, mfdev=3D0=0D
	cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
found->	vendor=3D0x8086, dev=3D0x2543, revid=3D0x01=0D
	bus=3D0, slot=3D2, func=3D0=0D
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0D
	cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0D
	map[20]: type 4, range 32, base 00002000, size  5, enabled=0D
pcib0: matched entry for 0.29.INTA=0D
pcib0: slot 29 INTA hardwired to IRQ 16=0D
found->	vendor=3D0x8086, dev=3D0x2482, revid=3D0x02=0D
	bus=3D0, slot=3D29, func=3D0=0D
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1=0D
	cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
	intpin=3Da, irq=3D16=0D
	map[20]: type 4, range 32, base 00002020, size  5, enabled=0D
pcib0: matched entry for 0.29.INTB=0D
pcib0: slot 29 INTB hardwired to IRQ 19=0D
found->	vendor=3D0x8086, dev=3D0x2484, revid=3D0x02=0D
	bus=3D0, slot=3D29, func=3D1=0D
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0D
	cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
	intpin=3Db, irq=3D19=0D
	map[20]: type 4, range 32, base 00002040, size  5, enabled=0D
pcib0: matched entry for 0.29.INTC=0D
pcib0: slot 29 INTC hardwired to IRQ 18=0D
found->	vendor=3D0x8086, dev=3D0x2487, revid=3D0x02=0D
	bus=3D0, slot=3D29, func=3D2=0D
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0D
	cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
	intpin=3Dc, irq=3D18=0D
found->	vendor=3D0x8086, dev=3D0x244e, revid=3D0x42=0D
	bus=3D0, slot=3D30, func=3D0=0D
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0D
	cmdreg=3D0x0107, statreg=3D0x0080, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0 ns)=0D
found->	vendor=3D0x8086, dev=3D0x2480, revid=3D0x02=0D
	bus=3D0, slot=3D31, func=3D0=0D
	class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1=0D
	cmdreg=3D0x010f, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
	map[10]: type 4, range 32, base 00000000, size  3, enabled=0D
	map[14]: type 4, range 32, base 00000000, size  2, enabled=0D
	map[20]: type 4, range 32, base 00002060, size  4, enabled=0D
found->	vendor=3D0x8086, dev=3D0x248b, revid=3D0x02=0D
	bus=3D0, slot=3D31, func=3D1=0D
	class=3D01-01-8b, hdrtype=3D0x00, mfdev=3D0=0D
	cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
	intpin=3Da, irq=3D255=0D
	map[20]: type 4, range 32, base 00001100, size  5, enabled=0D
found->	vendor=3D0x8086, dev=3D0x2483, revid=3D0x02=0D
	bus=3D0, slot=3D31, func=3D3=0D
	class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0=0D
	cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
	intpin=3Db, irq=3D255=0D
pci0: <unknown> at device 0.1 (no driver attached)=0D
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0=0D
pcib1:   secondary bus     1=0D
pcib1:   subordinate bus   3=0D
pcib1:   I/O decode        0x3000-0x4fff=0D
pcib1:   memory decode     0xfc100000-0xfc3fffff=0D
pcib1:   prefetched decode 0xfff00000-0xfffff=0D
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.HLB_ - AE_N=
OT_FOUND=0D
pci1: <ACPI PCI bus> on pcib1=0D
pci1: physical bus=3D1=0D
	map[10]: type 1, range 32, base fc100000, size 12, enabled=0D
pcib1: device (null) requested decoded memory range 0xfc100000-0xfc100fff=0D
found->	vendor=3D0x8086, dev=3D0x1461, revid=3D0x04=0D
	bus=3D1, slot=3D28, func=3D0=0D
	class=3D08-00-20, hdrtype=3D0x00, mfdev=3D0=0D
	cmdreg=3D0x0106, statreg=3D0x0030, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
found->	vendor=3D0x8086, dev=3D0x1460, revid=3D0x04=0D
	bus=3D1, slot=3D29, func=3D0=0D
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0D
	cmdreg=3D0x0107, statreg=3D0x0030, cachelnsz=3D16 (dwords)=0D
	lattimer=3D0x40 (1920 ns), mingnt=3D0x24 (9000 ns), maxlat=3D0x00 (0 ns)=0D
	map[10]: type 1, range 32, base fc101000, size 12, enabled=0D
pcib1: device (null) requested decoded memory range 0xfc101000-0xfc101fff=0D
found->	vendor=3D0x8086, dev=3D0x1461, revid=3D0x04=0D
	bus=3D1, slot=3D30, func=3D0=0D
	class=3D08-00-20, hdrtype=3D0x00, mfdev=3D0=0D
	cmdreg=3D0x0106, statreg=3D0x0030, cachelnsz=3D0 (dwords)=0D
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0D
found->	vendor=3D0x8086, dev=3D0x1460, revid=3D0x04=0D
	bus=3D1, slot=3D31, func=3D0=0D
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0=0D
	cmdreg=3D0x0107, statreg=3D0x0030, cachelnsz=3D16 (dwords)=0D
	lattimer=3D0x40 (1920 ns), mingnt=3D0x24 (9000 ns), maxlat=3D0x00 (0 ns)=0D
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver att=
ached)=0D
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1=0D
pcib2:   secondary bus     2=0D
pcib2:   subordinate bus   2=0D
pcib2:   I/O decode        0x3000-0x3fff=0D
pcib2:   memory decode     0xfc200000-0xfc2fffff=0D
pcib2:   prefetched decode 0xfff00000-0xfffff=0D
ACPI PCI link initial configuration:=0D
pci2: <ACPI PCI bus> on pcib2=0D
pci2: physical bus=3D2=0D
	map[10]: type 1, range 64, base fc200000, size 17, enabled=0D
pcib2: device (null) requested decoded memory range 0xfc200000-0xfc21ffff=0D
pcib1: device (null) requested decoded memory range 0xfc200000-0xfc21ffff=0D
	map[20]: type 4, range 32, base 00003000, size  6, enabled=0D
pcib2: device (null) requested decoded I/O range 0x3000-0x303f=0D
pcib1: device (null) requested decoded I/O range 0x3000-0x303f=0D
pcib2: matched entry for 2.3.INTA=0D
pcib2: slot 3 INTA hardwired to IRQ 54=0D
found->	vendor=3D0x8086, dev=3D0x1010, revid=3D0x01=0D
	bus=3D2, slot=3D3, func=3D0=0D
	class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1=0D
	cmdreg=3D0x0117, statreg=3D0x0230, cachelnsz=3D8 (dwords)=0D
	lattimer=3D0x40 (1920 ns), mingnt=3D0xff (63750 ns), maxlat=3D0x00 (0 ns)=
=0D
	intpin=3Da, irq=3D54=0D
	powerspec 2  supports D0 D3  current D0=0D
	MSI supports 1 message, 64 bit=0D
	map[10]: type 1, range 64, base fc220000, size 17, enabled=0D
pcib2: device (null) requested decoded memory range 0xfc220000-0xfc23ffff=0D
pcib1: device (null) requested decoded memory range 0xfc220000-0xfc23ffff=0D
	map[20]: type 4, range 32, base 00003040, size  6, enabled=0D
pcib2: device (null) requested decoded I/O range 0x3040-0x307f=0D
pcib1: device (null) requested decoded I/O range 0x3040-0x307f=0D
pcib2: matched entry for 2.3.INTB=0D
pcib2: slot 3 INTB hardwired to IRQ 55=0D
found->	vendor=3D0x8086, dev=3D0x1010, revid=3D0x01=0D
	bus=3D2, slot=3D3, func=3D1=0D
	class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1=0D
	cmdreg=3D0x0117, statreg=3D0x0230, cachelnsz=3D8 (dwords)=0D
	lattimer=3D0x40 (1920 ns), mingnt=3D0xff (63750 ns), maxlat=3D0x00 (0 ns)=
=0D
	intpin=3Db, irq=3D55=0D
	powerspec 2  supports D0 D3  current D0=0D
	MSI supports 1 message, 64 bit=0D
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3000-0=
x303f mem 0xfc200000-0xfc21ffff irq 54 at device 3.0 on pci2=0D
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc200000=0D
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3000=0D
em0: [MPSAFE]=0D
em0: bpf attached=0D
em0: Ethernet address: 00:30:48:2b:4d:06=0D
em0:  Speed:N/A  Duplex:N/A=0D
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3040-0=
x307f mem 0xfc220000-0xfc23ffff irq 55 at device 3.1 on pci2=0D
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfc220000=0D
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040=0D
em1: [MPSAFE]=0D
em1: bpf attached=0D
em1: Ethernet address: 00:30:48:2b:4d:07=0D
em1:  Speed:N/A  Duplex:N/A=0D
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver att=
ached)=0D
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1=0D
pcib3:   secondary bus     3=0D
pcib3:   subordinate bus   3=0D
pcib3:   I/O decode        0x4000-0x4fff=0D
pcib3:   memory decode     0xfc300000-0xfc3fffff=0D
pcib3:   prefetched decode 0xfff00000-0xfffff=0D
ACPI PCI link initial configuration:=0D
pci3: <ACPI PCI bus> on pcib3=0D
pci3: physical bus=3D3=0D
	map[10]: type 4, range 32, base 00004400, size  8, enabled=0D
pcib3: device (null) requested decoded I/O range 0x4400-0x44ff=0D
pcib1: device (null) requested decoded I/O range 0x4400-0x44ff=0D
	map[14]: type 1, range 64, base fc300000, size 13, enabled=0D
pcib3: device (null) requested decoded memory range 0xfc300000-0xfc301fff=0D
pcib1: device (null) requested decoded memory range 0xfc300000-0xfc301fff=0D
	map[1c]: type 4, range 32, base 00004000, size  8, enabled=0D
pcib3: device (null) requested decoded I/O range 0x4000-0x40ff=0D
pcib1: device (null) requested decoded I/O range 0x4000-0x40ff=0D
pcib3: matched entry for 3.2.INTA=0D
pcib3: slot 2 INTA hardwired to IRQ 28=0D
found->	vendor=3D0x9005, dev=3D0x801d, revid=3D0x10=0D
	bus=3D3, slot=3D2, func=3D0=0D
	class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1=0D
	cmdreg=3D0x0117, statreg=3D0x0430, cachelnsz=3D8 (dwords)=0D
	lattimer=3D0x40 (1920 ns), mingnt=3D0x28 (10000 ns), maxlat=3D0x19 (6250 n=
s)=0D
	intpin=3Da, irq=3D28=0D
	powerspec 2  supports D0 D3  current D0=0D
	MSI supports 2 messages, 64 bit=0D
	map[10]: type 4, range 32, base 00004c00, size  8, enabled=0D
pcib3: device (null) requested decoded I/O range 0x4c00-0x4cff=0D
pcib1: device (null) requested decoded I/O range 0x4c00-0x4cff=0D
	map[14]: type 1, range 64, base fc302000, size 13, enabled=0D
pcib3: device (null) requested decoded memory range 0xfc302000-0xfc303fff=0D
pcib1: device (null) requested decoded memory range 0xfc302000-0xfc303fff=0D
	map[1c]: type 4, range 32, base 00004800, size  8, enabled=0D
pcib3: device (null) requested decoded I/O range 0x4800-0x48ff=0D
pcib1: device (null) requested decoded I/O range 0x4800-0x48ff=0D
pcib3: matched entry for 3.2.INTB=0D
pcib3: slot 2 INTB hardwired to IRQ 29=0D
found->	vendor=3D0x9005, dev=3D0x801d, revid=3D0x10=0D
	bus=3D3, slot=3D2, func=3D1=0D
	class=3D01-00-00, hdrtype=3D0x00, mfdev=3D1=0D
	cmdreg=3D0x0117, statreg=3D0x0430, cachelnsz=3D8 (dwords)=0D
	lattimer=3D0x40 (1920 ns), mingnt=3D0x28 (10000 ns), maxlat=3D0x19 (6250 n=
s)=0D
	intpin=3Db, irq=3D29=0D
	powerspec 2  supports D0 D3  current D0=0D
	MSI supports 2 messages, 64 bit=0D
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4000-0x40ff,0x4400-0x4=
4ff mem 0xfc300000-0xfc301fff irq 28 at device 2.0 on pci3=0D
ahd0: Defaulting to MEMIO on=0D
ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xfc300000=0D
ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful=0D
ahd0: Reading SEEPROM...done.=0D
ahd0: STPWLEVEL is on=0D
ahd0: Manual Primary Termination=0D
ahd0: Manual Secondary Termination=0D
ahd0: Primary High byte termination Enabled=0D
ahd0: Primary Low byte termination Enabled=0D
ahd0: Secondary High byte termination Disabled=0D
ahd0: Secondary Low byte termination Disabled=0D
ahd0: Downloading Sequencer Program... 696 instructions downloaded=0D
ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x43f1=0D
ahd0: [GIANT-LOCKED]=0D
aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 101-133Mhz, 512 SCBs=0D
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x4800-0x48ff,0x4c00-0x4=
cff mem 0xfc302000-0xfc303fff irq 29 at device 2.1 on pci3=0D
ahd1: Defaulting to MEMIO on=0D
ahd1: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xfc302000=0D
ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful=0D
ahd1: Reading SEEPROM...done.=0D
ahd1: STPWLEVEL is on=0D
ahd1: Manual Primary Termination=0D
ahd1: Manual Secondary Termination=0D
ahd1: Primary High byte termination Enabled=0D
ahd1: Primary Low byte termination Enabled=0D
ahd1: Secondary High byte termination Disabled=0D
ahd1: Secondary Low byte termination Disabled=0D
ahd1: Downloading Sequencer Program... 696 instructions downloaded=0D
ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x43f0=0D
ahd1: [GIANT-LOCKED]=0D
aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 101-133Mhz, 512 SCBs=0D
pci0: <serial bus, USB> at device 29.0 (no driver attached)=0D
pci0: <serial bus, USB> at device 29.1 (no driver attached)=0D
pci0: <serial bus, USB> at device 29.2 (no driver attached)=0D
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0=0D
pcib4:   secondary bus     4=0D
pcib4:   subordinate bus   4=0D
pcib4:   I/O decode        0x5000-0x5fff=0D
pcib4:   memory decode     0xfc400000-0xfdffffff=0D
pcib4:   prefetched decode 0xfff00000-0xfffff=0D
pcib4:   Subtractively decoded bridge.=0D
ACPI PCI link initial configuration:=0D
pci4: <ACPI PCI bus> on pcib4=0D
pci4: physical bus=3D4=0D
	map[10]: type 1, range 32, base fd000000, size 24, enabled=0D
pcib4: device (null) requested decoded memory range 0xfd000000-0xfdffffff=0D
	map[14]: type 4, range 32, base 00005000, size  8, enabled=0D
pcib4: device (null) requested decoded I/O range 0x5000-0x50ff=0D
	map[18]: type 1, range 32, base fc400000, size 12, enabled=0D
pcib4: device (null) requested decoded memory range 0xfc400000-0xfc400fff=0D
pcib4: matched entry for 4.1.INTA=0D
pcib4: slot 1 INTA hardwired to IRQ 16=0D
found->	vendor=3D0x1002, dev=3D0x4752, revid=3D0x27=0D
	bus=3D4, slot=3D1, func=3D0=0D
	class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0D
	cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D8 (dwords)=0D
	lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns)=0D
	intpin=3Da, irq=3D16=0D
	powerspec 2  supports D0 D1 D2 D3  current D0=0D
pci4: <display, VGA> at device 1.0 (no driver attached)=0D
isab0: <PCI-ISA bridge> at device 31.0 on pci0=0D
isa0: <ISA bus> on isab0=0D
atapci0: <Intel ICH3 UDMA100 controller> port 0x2060-0x206f,0x376,0x170-0x1=
77 at device 31.1 on pci0=0D
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2060=0D
ata2: channel #0 on atapci0=0D
atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0=0D
atapci0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x3f8=0D
ata2: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff=0D
ata2: [MPSAFE]=0D
ata1: channel #1 on atapci0=0D
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170=0D
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376=0D
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01=0D
ata1-master: stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0D
ata1-slave:  stat=3D0x01 err=3D0x04 lsb=3D0x00 msb=3D0x00=0D
ata1: reset tp2 stat0=3D00 stat1=3D01 devices=3D0x4<ATAPI_MASTER>=0D
ata1: [MPSAFE]=0D
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)=0D
acpi_button0: <Power Button> on acpi0=0D
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0=0D
atkbd0: <AT Keyboard> irq 1 on atkbdc0=0D
kbd0 at atkbd0=0D
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000=0D
atkbd0: [GIANT-LOCKED]=0D
psm0: unable to allocate IRQ=0D
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0=0D
psm0: current command byte:0067=0D
kbdc: TEST_AUX_PORT status:0000=0D
kbdc: RESET_AUX return code:00fe=0D
kbdc: RESET_AUX return code:00fe=0D
kbdc: RESET_AUX return code:00fe=0D
kbdc: DIAGNOSE status:0055=0D
kbdc: TEST_KBD_PORT status:0000=0D
psm0: failed to reset the aux device.=0D
sio0: irq maps: 0x8001 0x8011 0x8011 0x8011=0D
sio0: probe failed test(s): 1 2 4 6 7 9=0D
sio0: irq maps: 0x8011 0x8019 0x8011 0x8011=0D
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acp=
i0=0D
sio0: type 16550A, console=0D
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0=
=0D
fdc0: ic_type 90 part_id 80=0D
fdc0: [MPSAFE]=0D
fdc0: [FAST]=0D
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0D
unknown: not probed (disabled)=0D
sio1: irq maps: 0x8001 0x8011 0x8011 0x8011=0D
sio1: probe failed test(s): 1 2 4 6 7 9=0D
unknown: not probed (disabled)=0D
ata: ata1 already exists; skipping it=0D
atkbdc: atkbdc0 already exists; skipping it=0D
fdc: fdc0 already exists; skipping it=0D
sio: sio0 already exists; skipping it=0D
Trying Read_Port at 203=0D
Trying Read_Port at 243=0D
Trying Read_Port at 283=0D
Trying Read_Port at 2c3=0D
Trying Read_Port at 303=0D
Trying Read_Port at 343=0D
Trying Read_Port at 383=0D
Trying Read_Port at 3c3=0D
ahc_isa_probe 0: ioport 0xc00 alloc failed=0D
ahc_isa_probe 4: ioport 0x4c00 alloc failed=0D
sc: sc0 already exists; skipping it=0D
vga: vga0 already exists; skipping it=0D
isa_probe_children: disabling PnP devices=0D
isa_probe_children: probing non-PnP devices=0D
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe3fff,0xca000-0xcafff,0xc9000-0x=
c9fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0=0D
pmtimer0 on isa0=0D
adv0: not probed (disabled)=0D
aha0: not probed (disabled)=0D
aic0: not probed (disabled)=0D
ata0 failed to probe at port 0x1f0 irq 14 on isa0=0D
bt0: not probed (disabled)=0D
cs0: not probed (disabled)=0D
ed0: not probed (disabled)=0D
fe0: not probed (disabled)=0D
ie0: not probed (disabled)=0D
lnc0: not probed (disabled)=0D
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0=0D
pcic1: not probed (disabled)=0D
ppc0 failed to probe at irq 7 on isa0=0D
sc0: <System console> at flags 0x100 on isa0=0D
sc0: VGA <16 virtual consoles, flags=3D0x100>=0D
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)=0D
sio1 failed to probe at port 0x2f8 irq 3 on isa0=0D
sio2: not probed (disabled)=0D
sio3: not probed (disabled)=0D
sn0: not probed (disabled)=0D
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0D
fb0: vga0, vga, type:VGA (5), flags:0x7007f=0D
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000=0D
fb0: init mode:24, bios mode:3, current mode:24=0D
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k=0D
VGA parameters upon power-up=0D
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 =0D
bf 1f 00 4f 0d 0e 00 00 03 c0 9c 8e 8f 28 1f 96 =0D
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0D
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0D
VGA parameters in BIOS for mode 24=0D
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0D
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0D
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0D
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0D
EGA/VGA parameters to be used for mode 24=0D
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0D
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0D
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0D
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0D
vt0: not probed (disabled)=0D
isa_probe_children: probing PnP devices=0D
Device configuration finished.=0D
Reducing kern.maxvnodes 255058 -> 100000=0D
procfs registered=0D
Timecounter "TSC" frequency 3199109396 Hz quality -100=0D
Timecounters tick every 10.000 msec=0D
IPv6 packet filtering initialized, default to accept, logging disabled=0D
lo0: bpf attached=0D
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default=
 to accept, logging disabled=0D
ata1-master: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin=0D
ata1-master: setting PIO4 on Intel ICH3 chip=0D
acd0: <CD-224E/1.9A> CDROM drive at ata1 as master=0D
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4=0D
acd0: Reads: CDR, CDRW, CDDA stream, packet=0D
acd0: Writes:=0D
acd0: Audio: play, 256 volume levels=0D
acd0: Mechanism: ejectable tray, unlocked=0D
acd0: Medium: no/blank disc=0D
Waiting 5 seconds for SCSI devices to settle=0D
(noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.=0D
(noperiph:ahd1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.=0D
ahd0: Selection Timeout on A:8. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:5. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:9. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:6. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:10. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:8. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:11. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:9. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:3. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:10. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:4. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:11. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:5. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:0. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:12. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:1. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:13. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:2. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:14. 0 SCBs aborted=0D
ahd1: Selection Timeout on A:3. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:15. 0 SCBs aborted=0D
(probe0:ahd0:0:0:0): Retrying Command=0D
ahd1: Selection Timeout on A:4. 0 SCBs aborted=0D
(probe2:ahd0:0:2:0): Retrying Command=0D
(probe1:ahd0:0:1:0): Retrying Command=0D
(ahd0:A:0:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff=
=0D
(ahd0:A:0:0): Received PPR width 1, period 9, offset 64,options fa=0D
	Filtered to width 0, period 0, offset 0, options 0=0D
ahd1: Selection Timeout on A:12. 0 SCBs aborted=0D
(ahd0:A:2:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff=
=0D
(ahd0:A:2:0): Received PPR width 1, period 8, offset 7f,options 47=0D
	Filtered to width 1, period 8, offset 7f, options 47=0D
ahd0: target 2 using 16bit transfers=0D
ahd0: target 2 synchronous with period =3D 0x8, offset =3D 0x7f(DT|IU|RTI|Q=
AS)=0D
ahd1: Selection Timeout on A:13. 0 SCBs aborted=0D
(ahd0:A:1:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff=
=0D
(ahd0:A:1:0): Received PPR width 1, period 8, offset 3f,options ff=0D
	Filtered to width 1, period 8, offset 3f, options ff=0D
ahd0: target 1 using 16bit transfers=0D
ahd0: target 1 synchronous with period =3D 0x8, offset =3D 0x3f(RDSTRM|DT|I=
U|RTI|QAS)=0D
ahd1: Selection Timeout on A:14. 0 SCBs aborted=0D
ahd0: Invalid Sequencer interrupt occurred.=0D
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<=0D
ahd0: Dumping Card State at program address 0x23b Mode 0x0=0D
Card was paused=0D
INTSTAT[0x0] SELOID[0x1] SELID[0x20] HS_MAILBOX[0x0] =0D
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] =0D
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) =0D
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] =0D
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] =0D
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|I=
NTMASK2) =0D
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x4] =0D
KERNEL_QFREEZE_COUNT[0x4] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff] =0D
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] =0D
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0] =0D
LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] =0D
LQOSTAT2[0x0] =0D
=0D
SCB Count =3D 16 CMDS_PENDING =3D 0 LASTSCB 0xffff CURRSCB 0x9 NEXTSCB 0xff=
40=0D
qinstart =3D 43 qinfifonext =3D 45=0D
QINFIFO: 0xa 0x8=0D
WAITING_TID_QUEUES:=0D
Pending list:=0D
  8 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x67] =
=0D
 10 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x7] =
=0D
Total 2=0D
Kernel Free SCB list: 9 15 1 2 3 4 5 6 7 11 12 13 14 0 =0D
Sequencer Complete DMA-inprog list: =0D
Sequencer Complete list: =0D
Sequencer DMA-Up and Complete list: =0D
Sequencer On QFreeze and Complete list: =0D
=0D
=0D
ahd0: FIFO0 Free, LONGJMP =3D=3D 0x8000, SCB 0xf=0D
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|EN=
SAVEPTRS) =0D
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) =0D
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] =0D
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR =3D 0x00, SHCNT =3D 0x0=
 =0D
HADDR =3D 0x00, HCNT =3D 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) =0D
=0D
ahd0: FIFO1 Free, LONGJMP =3D=3D 0x8063, SCB 0x8=0D
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|EN=
SAVEPTRS) =0D
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) =0D
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] =0D
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR =3D 0x00, SHCNT =3D 0x0=
 =0D
HADDR =3D 0x00, HCNT =3D 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) =0D
LQIN: 0x8 0x0 0x0 0xf 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0=
x0 0x0 0x0 =0D
ahd0: LQISTATE =3D 0x0, LQOSTATE =3D 0x0, OPTIONMODE =3D 0x42=0D
ahd0: OS_SPACE_CNT =3D 0x20 MAXCMDCNT =3D 0x1=0D
ahd0: SAVED_SCSIID =3D 0x0 SAVED_LUN =3D 0x0=0D
=0D
SIMODE0[0xc]:(ENOVERRUN|ENIOERR) =0D
CCSCBCTL[0x0] =0D
ahd0: REG0 =3D=3D 0x1560, SINDEX =3D 0x10e, DINDEX =3D 0x104=0D
ahd0: SCBPTR =3D=3D 0xf, SCB_NEXT =3D=3D 0xff40, SCB_NEXT2 =3D=3D 0x9=0D
CDB 12 20 0 80 88 66=0D
STACK: 0x236 0x2 0x0 0x0 0x0 0x0 0x0 0x0=0D
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>=0D
ahd0: target 1 using 8bit transfers=0D
ahd0: target 1 using asynchronous transfers=0D
ahd0: target 2 using 8bit transfers=0D
ahd0: target 2 using asynchronous transfers=0D
ahd1: Selection Timeout on A:15. 0 SCBs aborted=0D
(probe0:ahd0:0:0:2): Request Requeued=0D
(probe0:ahd0:0:0:2): Retrying Command=0D
(probe3:ahd0:0:6:5): Request Requeued=0D
(probe3:ahd0:0:6:5): Retrying Command=0D
(ahd0:A:2:2): Sending PPR bus_width 1, period 8, offset 7f, ppr_options c7=
=0D
(ahd0:A:2:2): Received PPR width 1, period 8, offset 7f,options 47=0D
	Filtered to width 1, period 8, offset 7f, options 47=0D
ahd0: target 2 using 16bit transfers=0D
ahd0: target 2 synchronous with period =3D 0x8, offset =3D 0x7f(DT|IU|RTI|Q=
AS)=0D
(probe1:ahd0:0:2:2): Request Requeued=0D
(probe1:ahd0:0:2:2): Retrying Command=0D
(ahd0:A:1:1): Sending PPR bus_width 1, period 8, offset 3f, ppr_options ff=
=0D
(ahd0:A:1:1): Received PPR width 1, period 8, offset 3f,options ff=0D
	Filtered to width 1, period 8, offset 3f, options ff=0D
ahd0: target 1 using 16bit transfers=0D
ahd0: target 1 synchronous with period =3D 0x8, offset =3D 0x3f(RDSTRM|DT|I=
U|RTI|QAS)=0D
(probe2:ahd0:0:1:1): Request Requeued=0D
(probe2:ahd0:0:1:1): Retrying Command=0D
ahd0: target 2 using 8bit transfers=0D
ahd0: target 2 using asynchronous transfers=0D
ahd0: Selection Timeout on A:2. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:2. 0 SCBs aborted=0D
ahd0: Selection Timeout on A:2. 0 SCBs aborted=0D
ahd0: Invalid Sequencer interrupt occurred.=0D
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<=0D
ahd0: Dumping Card State at program address 0x23b Mode 0x0=0D
Card was paused=0D
INTSTAT[0x0] SELOID[0x2] SELID[0x10] HS_MAILBOX[0x0] =0D
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11] =0D
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE) =0D
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0] =0D
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0] =0D
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|I=
NTMASK2) =0D
SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SEQ_FLAGS2[0x0] =0D
QFREEZE_COUNT[0x4] KERNEL_QFREEZE_COUNT[0x4] MK_MESSAGE_SCB[0xff00] =0D
MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] =0D
SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) =0D
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] =0D
LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT) =0D
=0D
SCB Count =3D 16 CMDS_PENDING =3D 1 LASTSCB 0xffff CURRSCB 0xa NEXTSCB 0xff=
80=0D
qinstart =3D 58 qinfifonext =3D 58=0D
QINFIFO:=0D
WAITING_TID_QUEUES:=0D
       0 ( 0xf )=0D
Pending list:=0D
 15 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x7] =0D
Total 1=0D
Kernel Free SCB list: 8 10 9 1 2 3 4 5 6 7 11 12 13 14 0 =0D
Sequencer Complete DMA-inprog list: =0D
Sequencer Complete list: =0D
Sequencer DMA-Up and Complete list: =0D
Sequencer On QFreeze and Complete list: =0D
=0D
=0D
ahd0: FIFO0 Free, LONGJMP =3D=3D 0x8000, SCB 0x8=0D
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|EN=
SAVEPTRS) =0D
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) =0D
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] =0D
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR =3D 0x00, SHCNT =3D 0x0=
 =0D
HADDR =3D 0x00, HCNT =3D 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) =0D
=0D
ahd0: FIFO1 Free, LONGJMP =3D=3D 0x8063, SCB 0xf=0D
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|EN=
SAVEPTRS) =0D
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) =0D
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0] =0D
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR =3D 0x00, SHCNT =3D 0x0=
 =0D
HADDR =3D 0x00, HCNT =3D 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL) =0D
LQIN: 0x8 0x0 0x0 0x8 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0=
x0 0x0 0x0 =0D
ahd0: LQISTATE =3D 0x0, LQOSTATE =3D 0x0, OPTIONMODE =3D 0x42=0D
ahd0: OS_SPACE_CNT =3D 0x20 MAXCMDCNT =3D 0x1=0D
ahd0: SAVED_SCSIID =3D 0x0 SAVED_LUN =3D 0x0=0D
=0D
SIMODE0[0xc]:(ENOVERRUN|ENIOERR) =0D
CCSCBCTL[0x4]:(CCSCBDIR) =0D
ahd0: REG0 =3D=3D 0x1560, SINDEX =3D 0x10e, DINDEX =3D 0x102=0D
ahd0: SCBPTR =3D=3D 0x8, SCB_NEXT =3D=3D 0xff80, SCB_NEXT2 =3D=3D 0xa=0D
CDB 12 40 0 80 8 5c=0D
STACK: 0x36 0x24 0x0 0x0 0x0 0x0 0x0 0x0=0D
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>=0D
ahd0: target 1 using 8bit transfers=0D
ahd0: target 1 using asynchronous transfers=0D
=0D
=0D
Fatal trap 12: page fault while in kernel mode=0D
cpuid =3D 0; apic id =3D 00=0D
fault virtual address	=3D 0xdeadc0de=0D
fault code		=3D supervisor read, page not present=0D
instruction pointer	=3D 0x8:0xc04411bc=0D
stack pointer	        =3D 0x10:0xe7c59a74=0D
frame pointer	        =3D 0x10:0xe7c59a80=0D
code segment		=3D base 0x0, limit 0xfffff, type 0x1b=0D
			=3D DPL 0, pres 1, def32 1, gran 1=0D
processor eflags	=3D interrupt enabled, resume, IOPL =3D 0=0D
current process		=3D 41 (irq28: ahd0)=0D
[thread pid 41 tid 100012 ]=0D
Stopped at      0xc04411bc =3D xpt_async_bcast+0x18:      movl    0(%eax),%=
ebx=0D
db> trace=0D
Tracing pid 41 tid 100012 td 0xc5648300=0D
xpt_async_bcast(c59b1270,1,c57baaf0,0,1,c57930c0,c57c3e40,c59b1200,0) at 0x=
c04411bc =3D xpt_async_bcast+0x18=0D
xpt_async(1,c57baaf0,0,0,c57baaf0) at 0xc044115a =3D xpt_async+0xca=0D
ahd_send_async(c5794000,41,ffffffff,ffffffff,1) at 0xc0483ea2 =3D ahd_send_=
async+0xe2=0D
ahd_reset_channel(c5794000,41,1,c5794000,c06b0522,c5791460) at 0xc047d550 =
=3D ahd_reset_channel+0x348=0D
ahd_handle_seqint(c5794000,4) at 0xc046ebf4 =3D ahd_handle_seqint+0x320=0D
ahd_platform_intr(c5794000) at 0xc04828fb =3D ahd_platform_intr+0x177=0D
ithread_loop(c5641e80,e7c59d38,c5641e80,c051769c,0) at 0xc05177c0 =3D ithre=
ad_loop+0x124=0D
fork_exit(c051769c,c5641e80,e7c59d38) at 0xc0516bbc =3D fork_exit+0xa4=0D
fork_trampoline() at 0xc06715cc =3D fork_trampoline+0x8=0D
--- trap 0x1, eip =3D 0, esp =3D 0xe7c59d6c, ebp =3D 0 ---=0D
db> panic=0D
panic: from debugger=0D
cpuid =3D 0=0D
KDB: stack backtrace:=0D
kdb_backtrace(100,c5648300,0,c06e4230,c06e424c) at 0xc053f6d1 =3D kdb_backt=
race+0x29=0D
panic(c06abe3e,e7c59928,c044e484,c04411bc,0) at 0xc0529730 =3D panic+0x114=
=0D
db_panic(c04411bc,0,ffffffff,e7c5989c,0) at 0xc044e4ed =3D db_panic+0xd=0D
db_command(c071ffe4,c06ec8e0,c06e4230,c06e424c,c06abe4c) at 0xc044e484 =3D =
db_command+0x264=0D
db_command_loop(0,0,e7c59954,e7c59940,e7c59988) at 0xc044e54c =3D db_comman=
d_loop+0x5c=0D
db_trap(c,0,10,e7c59a34,e7c599d0) at 0xc04500d1 =3D db_trap+0xdd=0D
kdb_trap(c,0,e7c59a34) at 0xc053f9ef =3D kdb_trap+0x8b=0D
trap_fatal(e7c59a34,deadc0de,c5648300,c1059000,deadc000) at 0xc06817a9 =3D =
trap_fatal+0x279=0D
trap_pfault(e7c59a34,0,deadc0de) at 0xc0681507 =3D trap_pfault+0x16b=0D
trap(c0440018,c5790010,c57c0010,0,1) at 0xc068116d =3D trap+0x30d=0D
calltrap() at 0xc067156a =3D calltrap+0x5=0D
--- trap 0xc, eip =3D 0xc04411bc, esp =3D 0xe7c59a74, ebp =3D 0xe7c59a80 --=
-=0D
xpt_async_bcast(c59b1270,1,c57baaf0,0,1,c57930c0,c57c3e40,c59b1200,0) at 0x=
c04411bc =3D xpt_async_bcast+0x18=0D
xpt_async(1,c57baaf0,0,0,c57baaf0) at 0xc044115a =3D xpt_async+0xca=0D
ahd_send_async(c5794000,41,ffffffff,ffffffff,1) at 0xc0483ea2 =3D ahd_send_=
async+0xe2=0D
ahd_reset_channel(c5794000,41,1,c5794000,c06b0522,c5791460) at 0xc047d550 =
=3D ahd_reset_channel+0x348=0D
ahd_handle_seqint(c5794000,4) at 0xc046ebf4 =3D ahd_handle_seqint+0x320=0D
ahd_platform_intr(c5794000) at 0xc04828fb =3D ahd_platform_intr+0x177=0D
ithread_loop(c5641e80,e7c59d38,c5641e80,c051769c,0) at 0xc05177c0 =3D ithre=
ad_loop+0x124=0D
fork_exit(c051769c,c5641e80,e7c59d38) at 0xc0516bbc =3D fork_exit+0xa4=0D
--More--=0D        =0Dfork_trampoline() at 0xc06715cc =3D fork_trampoline+0=
x8=0D
--- trap 0x1, eip =3D 0, esp =3D 0xe7c59d6c, ebp =3D 0 ---=0D
Uptime: 26s=0D
Cannot dump. No dump device defined.=0D
Automatic reboot in 15 seconds - press a key on the console to abort=0D
Rebooting...=0D

--jI8keyz6grp/JLjh--

--ZoaI/ZTpAVc4A5k6
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (FreeBSD)

iD8DBQFCb86EezjnobFOgrERAkl7AKC3JEaA5VTjEmcwxJ7OCBRWIzj0JQCaAneU
sTUCe8tEJdLvpjqMerqqaSE=
=F+Sz
-----END PGP SIGNATURE-----

--ZoaI/ZTpAVc4A5k6--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050427174020.GA6256>