Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 29 Jan 2010 10:10:14 +0000 (UTC)
From:      Rui Paulo <rpaulo@FreeBSD.org>
To:        cvs-src-old@freebsd.org
Subject:   cvs commit: src/sys/conf files src/sys/dev/ath/ath_hal ah_eeprom_v4k.h src/sys/dev/ath/ath_hal/ar5212 ar5212_power.c ar5212reg.h src/sys/dev/ath/ath_hal/ar5416 ar5416.h ar5416_ani.c ar5416_attach.c ar5416_cal.c ar5416_cal.h ar5416_gpio.c ...
Message-ID:  <201001291012.o0TACANK020797@repoman.freebsd.org>

next in thread | raw e-mail | index | archive | help
rpaulo      2010-01-29 10:10:14 UTC

  FreeBSD src repository

  Modified files:
    sys/conf             files 
    sys/dev/ath/ath_hal  ah_eeprom_v4k.h 
    sys/dev/ath/ath_hal/ar5212 ar5212_power.c ar5212reg.h 
    sys/dev/ath/ath_hal/ar5416 ar5416.h ar5416_ani.c 
                               ar5416_attach.c ar5416_cal.c 
                               ar5416_cal.h ar5416_gpio.c 
                               ar5416_reset.c ar5416phy.h 
                               ar5416reg.h ar9160_attach.c 
                               ar9280_attach.c 
  Added files:
    sys/dev/ath/ath_hal/ar5416 ar9285.ini ar9285v2.ini 
  Log:
  SVN rev 203159 on 2010-01-29 10:10:14Z by rpaulo
  
  Add support for the AR9285 chipset, which is found on many netbooks
  available today.
  
  This card is a low power 802.11bgn that only does 11n rates up to MCS 7
  (that's 65 Mbps in 20Mhz mode and 135 in 40Mhz mode).
  802.11n is  not yet supported, but will be in the future.
  
  The driver still has a problem regarding to the setting of txpower on
  the card, so don't expect good performance yet. After fixing this
  problem, an MFC is possible.
  
  Special thanks to iXsystems and S Smirnov <tonve at yandex.ru> for help
  with the purchase of a netbook with this card.
  
  Sponsored by:   iXsystems, Inc.
  
  Revision  Changes    Path
  1.1496    +52 -34    src/sys/conf/files
  1.2       +2 -4      src/sys/dev/ath/ath_hal/ah_eeprom_v4k.h
  1.2       +3 -3      src/sys/dev/ath/ath_hal/ar5212/ar5212_power.c
  1.4       +1 -0      src/sys/dev/ath/ath_hal/ar5212/ar5212reg.h
  1.9       +1 -0      src/sys/dev/ath/ath_hal/ar5416/ar5416.h
  1.3       +3 -3      src/sys/dev/ath/ath_hal/ar5416/ar5416_ani.c
  1.11      +1 -1      src/sys/dev/ath/ath_hal/ar5416/ar5416_attach.c
  1.4       +60 -2     src/sys/dev/ath/ath_hal/ar5416/ar5416_cal.c
  1.3       +1 -1      src/sys/dev/ath/ath_hal/ar5416/ar5416_cal.h
  1.5       +3 -1      src/sys/dev/ath/ath_hal/ar5416/ar5416_gpio.c
  1.12      +271 -96   src/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c
  1.2       +5 -1      src/sys/dev/ath/ath_hal/ar5416/ar5416phy.h
  1.5       +102 -34   src/sys/dev/ath/ath_hal/ar5416/ar5416reg.h
  1.8       +1 -1      src/sys/dev/ath/ath_hal/ar5416/ar9160_attach.c
  1.2       +52 -9     src/sys/dev/ath/ath_hal/ar5416/ar9280_attach.c
  1.1       +699 -0    src/sys/dev/ath/ath_hal/ar5416/ar9285.ini (new)
  1.1       +746 -0    src/sys/dev/ath/ath_hal/ar5416/ar9285v2.ini (new)



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201001291012.o0TACANK020797>