Date: Sun, 18 Mar 2012 21:08:15 +0400 (MSK) From: Dmitry Morozovsky <marck@rinet.ru> To: Steven Hartland <killing@multiplay.co.uk> Cc: mav@freebsd.org, freebsd-stable@freebsd.org Subject: Re: ahci hangs on Supermicro MicroCloud second channel Message-ID: <alpine.BSF.2.00.1203182057380.65171@woozle.rinet.ru> In-Reply-To: <DF1AA664FAF24CE3BE38746A6F852BE4@multiplay.co.uk> References: <alpine.BSF.2.00.1203181934540.65171@woozle.rinet.ru> <DF1AA664FAF24CE3BE38746A6F852BE4@multiplay.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Steven, On Sun, 18 Mar 2012, Steven Hartland wrote: [snip] > We have quite a few of these running 8.2-RELEASE-p6 on AHCI with no > problems (kernel compiled with:- device ahci) > > ahci0: <Intel Cougar Point AHCI SATA controller> port > 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem > 0xfbc01000-0xfbc017ff irq 19 at device 31.2 on pci0 > ahci0: [ITHREAD] > ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich0: [ITHREAD] > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich1: [ITHREAD] > > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <WDC WD1003FBYX-01Y7B0 01.01V01> ATA-8 SATA 2.x device > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > ada1: <Corsair Force 3 SSD 1.3> ATA-8 SATA 3.x device > ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 57241MB (117231408 512 byte sectors: 16H 63S/T 16383C) > > Given this might be worth seeing if 8.2 on AHCI fixes the > hangs and hence its a regression in 9. If your running > generic you should be able to just add the following to > /boot/loader.conf > ahci_load="YES" Yes, I did it, but all I have ... wait a bit... Yes, I missed ahci.ko module on my PXE server in amd64/8 tree :-/ [kernel reinstall] Well, ahci problem solved, but I still have much worse performance (and different on ada0 and ada1!): ada0, MC 50-60 MBps ada1, MC 13-25 MBps ada*, 5017 130+ MBps Could you please post SATA/AHCI BIOS settings from your machines? Thanks a lot! -- Sincerely, D.Marck [DM5020, MCK-RIPE, DM3-RIPN] [ FreeBSD committer: marck@FreeBSD.org ] ------------------------------------------------------------------------ *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru *** ------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1203182057380.65171>