Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 19 May 2019 05:23:30 GMT
From:      pkg-fallout@FreeBSD.org
To:        pkg-fallout@FreeBSD.org
Subject:   [package - head-powerpc64-default][comms/xlog] Failed for xlog-2.0.17 in build
Message-ID:  <201905190523.x4J5NT44031767@pylon.nyi.freebsd.org>

next in thread | raw e-mail | index | archive | help

You are receiving this mail as a port that you maintain
is failing to build on the FreeBSD package build server.
Please investigate the failure and submit a PR to fix
build.

Maintainer:     danilo@FreeBSD.org
Last committer: danilo@FreeBSD.org
Ident:          $FreeBSD: head/comms/xlog/Makefile 490908 2019-01-21 22:45:00Z danilo $
Log URL:        http://pylon.nyi.freebsd.org/data/head-powerpc64-default/p501607_s347555/logs/xlog-2.0.17.log
Build URL:      http://pylon.nyi.freebsd.org/build.html?mastername=head-powerpc64-default&build=p501607_s347555
Log:

=>> Building comms/xlog
build started at Sun May 19 05:19:56 UTC 2019
port directory: /usr/ports/comms/xlog
package name: xlog-2.0.17
building for: FreeBSD head-powerpc64-default-job-22 13.0-CURRENT FreeBSD 13.0-CURRENT 1300025 powerpc
maintained by: danilo@FreeBSD.org
Makefile ident:      $FreeBSD: head/comms/xlog/Makefile 490908 2019-01-21 22:45:00Z danilo $
Poudriere version: 3.2.8-4-g701d8fe1
Host OSVERSION: 1300012
Jail OSVERSION: 1300025
Job Id: 22




!!! Jail is newer than host. (Jail: 1300025, Host: 1300012) !!!
!!! This is not supported. !!!
!!! Host kernel must be same or newer than jail. !!!
!!! Expect build failures. !!!



---Begin Environment---
SHELL=/bin/csh
OSVERSION=1300025
UNAME_v=FreeBSD 13.0-CURRENT 1300025
UNAME_r=13.0-CURRENT
BLOCKSIZE=K
MAIL=/var/mail/root
STATUS=1
HOME=/root
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin
LOCALBASE=/usr/local
USER=root
LIBEXECPREFIX=/usr/local/libexec/poudriere
POUDRIERE_VERSION=3.2.8-4-g701d8fe1
MASTERMNT=/usr/local/poudriere/data/.m/head-powerpc64-default/ref
POUDRIERE_BUILD_TYPE=bulk
PACKAGE_BUILDING=yes
SAVED_TERM=
PWD=/usr/local/poudriere/data/.m/head-powerpc64-default/ref/.p/pool
P_PORTS_FEATURES=FLAVORS SELECTED_OPTIONS
MASTERNAME=head-powerpc64-default
SCRIPTPREFIX=/usr/local/share/poudriere
OLDPWD=/usr/local/poudriere/data/.m/head-powerpc64-default/ref/.p
SCRIPTPATH=/usr/local/share/poudriere/bulk.sh
POUDRIEREPATH=/usr/local/bin/poudriere
---End Environment---

---Begin Poudriere Port Flags/Env---
PORT_FLAGS=
PKGENV=
FLAVOR=
DEPENDS_ARGS=
MAKE_ARGS=
---End Poudriere Port Flags/Env---

---Begin OPTIONS List---
===> The following configuration options are available for xlog-2.0.17:
     DOCS=on: Build and/or install documentation
     NLS=on: Native Language Support
===> Use 'make config' to modify these settings
---End OPTIONS List---

--MAINTAINER--
danilo@FreeBSD.org
--End MAINTAINER--

--CONFIGURE_ARGS--
--enable-mime-update --prefix=/usr/local ${_LATE_CONFIGURE_ARGS}
--End CONFIGURE_ARGS--

--CONFIGURE_ENV--
ac_cv_c_compiler_gnu=no PKG_CONFIG=pkgconf XDG_DATA_HOME=/wrkdirs/usr/ports/comms/xlog/work  XDG_CONFIG_HOME=/wrkdirs/usr/ports/comms/xlog/work  HOME=/wrkdirs/usr/ports/comms/xlog/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/comms/xlog/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 CONFIG_SITE=/usr/ports/Templates/config.site lt_cv_sys_max_cmd_len=262144
--End CONFIGURE_ENV--

--MAKE_ENV--
XDG_DATA_HOME=/wrkdirs/usr/ports/comms/xlog/work  XDG_CONFIG_HOME=/wrkdirs/usr/ports/comms/xlog/work  HOME=/wrkdirs/usr/ports/comms/xlog/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/comms/xlog/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 PREFIX=/usr/local  LOCALBASE=/usr/local  CC="cc" CFLAGS="-O2 -pipe  -fstack-protector-strong -fno-strict-aliasing "  CPP="cpp" CPPFLAGS=""  LDFLAGS=" -fstack-protector-strong " LIBS="-lm"  CXX="c++" CXXFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing  "  MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install  -s -m 555"  BSD_INSTALL_LIB="install  -s -m 0644"  BSD_INSTALL_SCRIPT="install  -m 555"  BSD_INSTALL_DATA="install  -m 0644"  BSD_INSTALL_MAN="install  -m 444"
--End MAKE_ENV--

--PLIST_SUB--
PORTDOCS="" DOCS="" NO_DOCS="@comment " NLS="" NO_NLS="@comment " GTK2_VERSION="2.10.0"  GTK3_VERSION="3.0.0" OSREL=13.0 PREFIX=%D LOCALBASE=/usr/local  RESETPREFIX=/usr/local LIB32DIR=lib DOCSDIR="share/doc/xlog"  EXAMPLESDIR="share/examples/xlog"  DATADIR="share/xlog"  WWWDIR="www/xlog"  ETCDIR="etc/xlog"
--End PLIST_SUB--

--SUB_LIST--
DOCS="" NO_DOCS="@comment " NLS="" NO_NLS="@comment " PREFIX=/usr/local LOCALBASE=/usr/local  DATADIR=/usr/local/share/xlog DOCSDIR=/usr/local/share/doc/xlog EXAMPLESDIR=/usr/local/share/examples/xlog  WWWDIR=/usr/local/www/xlog ETCDIR=/usr/local/etc/xlog
--End SUB_LIST--

---Begin make.conf---
USE_PACKAGE_DEPENDS=yes
BATCH=yes
WRKDIRPREFIX=/wrkdirs
PORTSDIR=/usr/ports
PACKAGES=/packages
DISTDIR=/distfiles
PACKAGE_BUILDING=yes
PACKAGE_BUILDING_FLAVORS=yes
#### /usr/local/etc/poudriere.d/make.conf ####
# XXX: We really need this but cannot use it while 'make checksum' does not
# try the next mirror on checksum failure.  It currently retries the same
# failed mirror and then fails rather then trying another.  It *does*
# try the next if the size is mismatched though.
#MASTER_SITE_FREEBSD=yes
# Build ALLOW_MAKE_JOBS_PACKAGES with 2 jobs
MAKE_JOBS_NUMBER=2

# stable/10 includes src.conf too late but make.conf is in sys.mk
.if ${.CURDIR:M/poudriere/jails/10*/usr/src/usr.bin/xlint*}
# Disable build of llib now that head no longer has lint(1)
LINT=	true
.endif
#### /usr/ports/Mk/Scripts/ports_env.sh ####
_CCVERSION_921dbbb2=cc (GCC) 4.2.1 20070831 patched [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
_ALTCCVERSION_921dbbb2=none
_CXXINTERNAL_acaad9ca=Using built-in specs. Target: powerpc64-undermydesk-freebsd Configured with: FreeBSD/powerpc64 system compiler Thread model: posix gcc version 4.2.1 20070831 patched [FreeBSD] "/usr/bin/ld" "--eh-frame-hdr" "-Qy" "-melf64ppc_fbsd" "--enable-new-dtags" "-dynamic-linker" "/libexec/ld-elf.so.1" "/usr/lib/crt1.o" "/usr/lib/crti.o" "/usr/lib/crtbegin.o" "-L/usr/lib" "-L/usr/lib" "/dev/null" "-lstdc++" "-lm" "-lgcc_s" "-lgcc" "-lc" "-lgcc_s" "-lgcc" "/usr/lib/crtsavres.o" "/usr/lib/crtend.o" "/usr/lib/crtn.o"
CC_OUTPUT_921dbbb2_58173849=yes
CC_OUTPUT_921dbbb2_9bdba57c=yes
CC_OUTPUT_921dbbb2_6a4fe7f5=cc1: error: unrecognized command line option "-std=c11"
CC_OUTPUT_921dbbb2_6bcac02b=yes
CC_OUTPUT_921dbbb2_67d20829=yes
CC_OUTPUT_921dbbb2_bfa62e83=cc1: error: unrecognized command line option "-std=gnu11"
CC_OUTPUT_921dbbb2_f0b4d593=yes
CC_OUTPUT_921dbbb2_308abb44=cc1plus: error: unrecognized command line option "-std=c++0x"
CC_OUTPUT_921dbbb2_f00456e5=cc1plus: error: unrecognized command line option "-std=c++11"
CC_OUTPUT_921dbbb2_65ad290d=cc1plus: error: unrecognized command line option "-std=c++14"
CC_OUTPUT_921dbbb2_f2776b26=cc1plus: error: unrecognized command line option "-std=c++17"
CC_OUTPUT_921dbbb2_b2657cc3=yes
CC_OUTPUT_921dbbb2_380987f7=cc1plus: error: unrecognized command line option "-std=gnu++11"
CC_OUTPUT_921dbbb2_160933ec=cc1plus: error: unrecognized command line option "-std=gnu++14"
CC_OUTPUT_921dbbb2_fb62803b=cc1plus: error: unrecognized command line option "-std=gnu++17"
_OBJC_CCVERSION_921dbbb2=cc (GCC) 4.2.1 20070831 patched [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
_OBJC_ALTCCVERSION_921dbbb2=none
ARCH=powerpc64
OPSYS=FreeBSD
_OSRELEASE=13.0-CURRENT
OSREL=13.0
OSVERSION=1300025
PYTHONBASE=/usr/local
CONFIGURE_MAX_CMD_LEN=262144
HAVE_PORTS_ENV=1
#### Misc Poudriere ####
GID=0
UID=0
DISABLE_MAKE_JOBS=poudriere
---End make.conf---
--Resource limits--
cpu time               (seconds, -t)  unlimited
file size           (512-blocks, -f)  unlimited
data seg size           (kbytes, -d)  33554432
stack size              (kbytes, -s)  524288
core file size      (512-blocks, -c)  unlimited
max memory size         (kbytes, -m)  unlimited
locked memory           (kbytes, -l)  unlimited
max user processes              (-u)  89999
open files                      (-n)  1024
virtual mem size        (kbytes, -v)  unlimited
swap limit              (kbytes, -w)  unlimited
socket buffer size       (bytes, -b)  unlimited
pseudo-terminals                (-p)  unlimited
kqueues                         (-k)  unlimited
umtx shared locks               (-o)  unlimited
--End resource limits--
=======================<phase: check-sanity   >============================
===>  License GPLv3 accepted by the user
===========================================================================
=======================<phase: pkg-depends    >============================
===>   xlog-2.0.17 depends on file: /usr/local/sbin/pkg - not found
===>   Installing existing package /packages/All/pkg-1.10.5_5.txz
[head-powerpc64-default-job-22] Installing pkg-1.10.5_5...
[head-powerpc64-default-job-22] Extracting pkg-1.10.5_5: .......... done
===>   xlog-2.0.17 depends on file: /usr/local/sbin/pkg - found
===>   Returning to build of xlog-2.0.17
===========================================================================
=======================<phase: fetch-depends  >============================
===========================================================================
=======================<phase: fetch          >============================
===>  License GPLv3 accepted by the user
===> Fetching all distfiles required by xlog-2.0.17 for building
===========================================================================
=======================<phase: checksum       >============================
===>  License GPLv3 accepted by the user
===> Fetching all distfiles required by xlog-2.0.17 for building
=> SHA256 Checksum OK for xlog-2.0.17.tar.gz.
===========================================================================
=======================<phase: extract-depends>============================
===========================================================================
=======================<phase: extract        >============================
===>  License GPLv3 accepted by the user
===> Fetching all distfiles required by xlog-2.0.17 for building
===>  Extracting for xlog-2.0.17
=> SHA256 Checksum OK for xlog-2.0.17.tar.gz.
===========================================================================
=======================<phase: patch-depends  >============================
===========================================================================
=======================<phase: patch          >============================
===>  Patching for xlog-2.0.17
===========================================================================
=======================<phase: build-depends  >============================
===>   xlog-2.0.17 depends on package: pkgconf>=1.3.0_1 - not found
<snip>

********************************* WARNING *********************************

FreeBSD does not, and can not warrant that the certification authorities
whose certificates are included in this package have in any way been
audited for trustworthiness or RFC 3647 compliance.

Assessment and verification of trust is the complete responsibility of the
system administrator.

*********************************** NOTE **********************************

This package installs symlinks to support root certificates discovery by
default for software that uses OpenSSL.

This enables SSL Certificate Verification by client software without manual
intervention.

If you prefer to do this manually, replace the following symlinks with
either an empty file or your site-local certificate bundle.

  * /etc/ssl/cert.pem
  * /usr/local/etc/ssl/cert.pem
  * /usr/local/openssl/cert.pem

***************************************************************************
Message from trousers-0.3.14_2:

To run tcsd automatically, add the following line to /etc/rc.conf:

tcsd_enable="YES"

You might want to edit /usr/local/etc/tcsd.conf to reflect your setup.

If you want to use tcsd with software TPM emulator, use the following
configuration in /etc/rc.conf:

tcsd_enable="YES"
tcsd_mode="emulator"
tpmd_enable="YES"

To use TPM, add your_account to '_tss' group like following:

# pw groupmod _tss -m your_account
Message from dejavu-2.37_1:

Make sure that the freetype module is loaded.  If it is not, add the following
line to the "Modules" section of your X Windows configuration file:

	Load "freetype"

Add the following line to the "Files" section of X Windows configuration file:

	FontPath "/usr/local/share/fonts/dejavu/"

Note: your X Windows configuration file is typically /etc/X11/XF86Config
if you are using XFree86, and /etc/X11/xorg.conf if you are using X.Org.
===>   xlog-2.0.17 depends on shared library: libgtk-x11-2.0.so - found (/usr/local/lib/libgtk-x11-2.0.so)
===>   Returning to build of xlog-2.0.17
===>   xlog-2.0.17 depends on shared library: libpango-1.0.so - found (/usr/local/lib/libpango-1.0.so)
===>   xlog-2.0.17 depends on shared library: libintl.so - found (/usr/local/lib/libintl.so)
===========================================================================
=======================<phase: configure      >============================
===>  Configuring for xlog-2.0.17
===>   FreeBSD 10 autotools fix applied to /wrkdirs/usr/ports/comms/xlog/work/xlog-2.0.17/config.rpath
configure: loading site script /usr/ports/Templates/config.site
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... (cached) /bin/mkdir -p
checking for gawk... (cached) /usr/bin/awk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for ranlib... ranlib
checking for style of include used by make... GNU
checking for gcc... cc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... (cached) no
checking whether cc accepts -g... yes
checking for cc option to accept ISO C89... none needed
checking whether cc understands -c and -o together... yes
checking dependency style of cc... gcc3
checking how to run the C preprocessor... cpp
checking for grep that handles long lines and -e... (cached) /usr/bin/grep
checking for egrep... (cached) /usr/bin/egrep
checking for ANSI C header files... (cached) yes
checking for sys/types.h... (cached) yes
checking for sys/stat.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for memory.h... (cached) yes
checking for strings.h... (cached) yes
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking for unistd.h... (cached) yes
checking sys/ipc.h usability... yes
checking sys/ipc.h presence... yes
checking for sys/ipc.h... yes
checking sys/shm.h usability... yes
checking sys/shm.h presence... yes
checking for sys/shm.h... yes
checking for strptime... (cached) yes
checking for strptime declaration in time.h... yes
checking for strchr... (cached) yes
checking for index... (cached) yes
checking pkg-config is at least version 0.9.0... yes
checking for GLIB... yes
checking for GTK... yes
checking for HAMLIB... yes
checking for update-mime-database... /usr/local/bin/update-mime-database
checking for update-desktop-database... no
checking for a sed that does not truncate output... (cached) /usr/bin/sed
checking whether NLS is requested... yes
checking for msgfmt... /usr/local/bin/msgfmt
checking for gmsgfmt... /usr/local/bin/msgfmt
checking for xgettext... /usr/local/bin/xgettext
checking for msgmerge... /usr/local/bin/msgmerge
checking build system type... powerpc64-portbld-freebsd13.0
checking host system type... powerpc64-portbld-freebsd13.0
checking for non-GNU ld... /usr/local/bin/ld
checking if the linker (/usr/local/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking for CFPreferencesCopyAppValue... no
checking for CFLocaleCopyCurrent... no
checking for GNU gettext in libc... no
checking for iconv... yes
checking for working iconv... yes
checking how to link with libiconv... /usr/local/lib/libiconv.so -rpath /usr/local/lib
checking for GNU gettext in libintl... yes
checking whether to use NLS... yes
checking where the gettext function comes from... external libintl
checking how to link with libintl... /usr/local/lib/libintl.so -rpath /usr/local/lib
enabled updating of the mime database
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating po/Makefile.in
config.status: creating m4/Makefile
config.status: creating Makefile
config.status: creating data/man/xlog.1
config.status: creating src/Makefile
config.status: creating src/logfile/Makefile
config.status: creating data/Makefile
config.status: creating data/desktop/Makefile
config.status: creating data/pixmaps/Makefile
config.status: creating data/mime/Makefile
config.status: creating data/man/Makefile
config.status: creating data/maps/Makefile
config.status: creating data/maps/3D2/Makefile
config.status: creating data/maps/3Y/Makefile
config.status: creating data/maps/E5/Makefile
config.status: creating data/maps/FK/Makefile
config.status: creating data/maps/FO/Makefile
config.status: creating data/maps/FR/Makefile
config.status: creating data/maps/HK0/Makefile
config.status: creating data/maps/JD/Makefile
config.status: creating data/maps/KH8/Makefile
config.status: creating data/maps/SV/Makefile
config.status: creating data/maps/VP6/Makefile
config.status: creating data/maps/VP8/Makefile
config.status: creating data/doc/Makefile
config.status: creating data/doc/manual/Makefile
config.status: creating data/doc/manual/output/Makefile
config.status: creating data/doc/manual/output/html/Makefile
config.status: creating data/doc/manual/output/html/search/Makefile
config.status: creating data/dxcc/Makefile
config.status: creating data/remote/Makefile
config.status: creating data/glabels/Makefile
config.status: creating data/utils/Makefile
config.status: creating data/images/Makefile
config.status: executing depfiles commands
config.status: executing po-directories commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
===========================================================================
=======================<phase: build          >============================
===>  Building for xlog-2.0.17
Making all in src
Making all in logfile
cc -DPACKAGE_NAME=\"xlog\" -DPACKAGE_TARNAME=\"xlog\" -DPACKAGE_VERSION=\"2.0.17\" -DPACKAGE_STRING=\"xlog\ 2.0.17\" -DPACKAGE_BUGREPORT=\"kb1oiq@arrl.net\" -DPACKAGE_URL=\"\" -DPACKAGE=\"xlog\" -DVERSION=\"2.0.17\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_IPC_H=1 -DHAVE_SYS_SHM_H=1 -DHAVE_STRPTIME=1 -DHAVE_STRPTIME_DECL=/\*\*/ -DHAVE_STRCHR=1 -DHAVE_INDEX=1 -DHAVE_ICONV=1 -DENABLE_NLS=1 -DHAVE_GETTEXT=1 -DHAVE_DCGETTEXT=1 -I.  -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include  -I/usr/local/include -Wno-stringop-truncation -O2 -pipe  -fstack-protector-strong -fno-strict-aliasing -MT logfile.o -MD -MP -MF .deps/logfile.Tpo -c -o logfile.o logfile.c
cc1: error: unrecognized command line option "-Wno-stringop-truncation"
*** Error code 1

Stop.
make[3]: stopped in /wrkdirs/usr/ports/comms/xlog/work/xlog-2.0.17/src/logfile
*** Error code 1

Stop.
make[2]: stopped in /wrkdirs/usr/ports/comms/xlog/work/xlog-2.0.17/src
*** Error code 1

Stop.
make[1]: stopped in /wrkdirs/usr/ports/comms/xlog/work/xlog-2.0.17
*** Error code 1

Stop.
make: stopped in /usr/ports/comms/xlog



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201905190523.x4J5NT44031767>