Date: Wed, 22 Dec 1999 16:41:14 -0500 (EST) From: Jimbo <notjames@quasi.pseudonet.org> To: Jim C <jconner@enterit.com> Cc: questions@FreeBSD.ORG Subject: Re: cdrecord issues Message-ID: <Pine.LNX.4.10.9912221639590.2164-100000@quasi.pseudonet.org> In-Reply-To: <001501bf4cbe$248c87b0$26c72dd1@KWAN>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello everyone. I need to apologize for the below post. I wasn't aware that the MUA I was using used html posting by default. Another reason I could go all day flaming M$. I really am sorry. Jim On Wed, 22 Dec 1999, Jim C wrote: > Hey all. Question about cdrecord. > I created an iso raw image using mkisofs. Below is the debug info. I cou= ld really use some assistance if possible. I appreciate it! >=20 > Specs: > FreeBSD 3.2-RELEASE (njkern) #8: Tue Oct 26 09:46:31 EDT 1999 > Cdrecord release 1.8a21 Copyright (C) 1995-1999 J=F7rg Schilling > and a Sony CD-R 920S on a P180MMX 128Mb. The worm is running on > a bus running on an Adaptec AHA2940 controller. There is a Seagate ST152= 30W Sun4.2G 0738 HDD. >=20 > I had no problems making the image file :) (called backup.raw) but I am = having a really difficult time getting cdrecord to write that img file to t= he cd. Below is the output from cdrecord. I have been all over the man pa= ges and am either missing something or am simply not understanding (this ca= n always be the case with me). >=20 > command: > cdrecord -v -speed=3D1 -multi -xa2 dev=3D1,6,0 -ignsize ./backup.raw=20 > dddddddddddddddd > Output: > cdrecord: No such file or directory. WARNING: RR-scheduler not available,= disabling. > Cdrecord release 1.8a21 Copyright (C) 1995-1999 J=F6rg Schilling > TOC Type: 3 =3D CD-ROM XA mode 2 > scsidev: '1,6,0' > scsibus: 1 target: 6 lun: 0 > atapi: 0 > Device type : Removable WORM > Version : 2 > Response Format: 2 > Capabilities : SYNC LINKED=20 > Vendor_info : 'SONY ' > Identifikation : 'CD-R CDU920S ' > Revision : '2.0c' > Device seems to be: Sony CDU-924S. > Using driver for Sony CDU-924 (sony_cdu924). > Driver flags : SWABAUDIO > Drive buf size : 1048576 =3D 1024 KB > FIFO size : 4194304 =3D 4096 KB > cdrecord: Undefined error: 0. WARNING: RR-scheduler not available, disabl= ing. > Track 01: data 68 MB =20 > Total size: 79 MB (07:49.97) =3D 35248 sectors > Lout start: 79 MB (07:51/73) =3D 35248 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 6 > Is not unrestricted > Disk application code: 0 > ATIP start of lead in: -11231 (97:32/19) > ATIP start of lead out: 335100 (74:30/00) > Disk type: Phthalocyanine or similar > Manuf. index: 27 > Manufacturer: Prodisc Technology Inc. > Blocks total: 335100 Blocks current: 335100 Blocks remaining: 299852 > RBlocks total: 343921 RBlocks current: 343921 RBlocks remaining: 308673 > Starting to write CD/DVD at speed 2 in write mode for multi session. > Last chance to quit, starting real write in 9 seconds.=08=08=08=08=08=08= =08=08=08=088 seconds.=08=08=08=08=08=08=08=08=08=087 seconds.=08=08=08=08= =08=08=08=08=08=086 seconds.=08=08=08=08=08=08=08=08=08=085 seconds.=08=08= =08=08=08=08=08=08=08=084 seconds.=08=08=08=08=08=08=08=08=08=083 seconds.= =08=08=08=08=08=08=08=08=08=082 seconds.=08=08=08=08=08=08=08=08=08=081 sec= onds. > Waiting for reader process to fill input-buffer ... cdrecord: Input/outpu= t error. write_track: scsi sendcmd: retryable error > status: 0x2 (CHECK CONDITION) > input-buffer ready. > CDB: F5 00 00 00 00 00 00 00 00 00 > Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 C9 00 00 00 00 00 00 00 = 20 06 00 00 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0xC9 Qual 0x00 (illegal block length for write command) Fru 0= x0 > Sense flags: Blk 0 (not valid)=20 > cmd finished after 0.018s timeout 40s > Writing time: 0.187s > Fixating... > cdrecord: Input/output error. finalize: scsi sendcmd: retryable error > status: 0x2 (CHECK CONDITION) > CDB: F1 00 00 00 00 00 00 00 01 00 > Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 89 00 00 00 00 00 00 00 = 02 06 00 00 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x89 Qual 0x00 (inappropriate command) Fru 0x0 > Sense flags: Blk 0 (not valid)=20 > cmd finished after 0.022s timeout 480s > cdrecord: fifo had 64 puts and 0 gets. > cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > Fixating time: 0.023s >=20 >=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.9912221639590.2164-100000>