Date: Wed, 27 May 1998 15:18:51 -0700 From: "Randy A. Katz" <randyk@ccsales.com> To: Jay <jay@oneway.com>, "Louis A. Mamakos" <louie@TransSys.COM> Cc: freebsd-hardware@FreeBSD.ORG, freebsd-isp@FreeBSD.ORG Subject: Re: T1+CSU/DSU card driver for FreeBSD (was: T1 CSU cards) Message-ID: <3.0.5.32.19980527151851.0378e3e0@ccsales.com> In-Reply-To: <Pine.BSF.3.96.980526231836.6948A-100000@tidal.oneway.com> References: <199805270306.XAA12627@whizzo.transsys.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I've been using the dual T1 PCI card from http://www.etinc.com They have drivers for Linux and FreeBSD and work great. I have implemented them on PPP, Frame Relay and HDLC connections. Thanx, Randy Katz At 12:27 AM 5/27/98 -0400, Jay wrote: >> > T1-serial cards without CSU.. Can anyone point me in the direction of T1 >> > cards with integrated CSU for FreeBSD? Does such an animal exist? >> >> 2. A high-speed serial card with a built-in CSU/DSU. You plug a T-1 line >> right into it, perhaps connected to a smart-jack. The T-1 line goes >> out of the building to a local central office. If lightning gets too >> close to this sort of wire, then you get bit errors and then it's better. >> Or at least the hardware doesn't burst into flame. >> I think you were asking about a product that does #2 as compared to a #1. > Yes, That is what I am searching for. I looked at the SDL web site >and it appears that they only support BSDI & Linux on the UNIX side. Do >you know if they have FreeBSD support? > >Also: > > I talked with a company called Sangoma (www.sangoma.com) this >afternoon, they have a T1 product with integrated csu/dsu which is >relatively inexpensive (about $850 US). Currently the only driver >software for their cards is for NT, Linux and SCO. > >HOWEVER: They are willing to do a port of their driver software to >FreeBSD, if people are interested and tell them so. I've already cast my >vote with them... if this is something you are interested in as well, >please let them know. I spoke with Gideon Hack this afternoon, his email >is ghack@sangoma.com. > If anyone knows anything I should know about these cards or sangoma, >please let me know. If not, I'm going to lean on the higher-ups here to >help me with getting Sangoma to do the driver port, since the project I am >currently working on may require us to purchase some quantity of them. > >If this is something you are interested in, please drop Gideon a line. >Every email they get will push it a little higher on their priority list. > >Thanks, > >Jay K. > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-isp" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19980527151851.0378e3e0>