Date: Tue, 19 Jun 2001 08:35:48 -0700 (PDT) From: G Muthukumar <kmuthu@hotmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: ports/28279: Some X applications freeze the system Message-ID: <200106191535.f5JFZma28292@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 28279
>Category: ports
>Synopsis: Some X applications freeze the system
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-ports
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Tue Jun 19 08:40:02 PDT 2001
>Closed-Date:
>Last-Modified:
>Originator: G Muthukumar
>Release: 4.3-RELEASE
>Organization:
>Environment:
FreeBSD freebsd.wipsys.sequent.com 4.3-RELEASE FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC i386
>Description:
I am experiencing this problem every now and then. I recently installed 4.3-RELEASE
on my system (It was running 3.3-RELEASE without any problem). Initially, I had problems with
xlockmore. When it was started thru xautolock, it froze my machine (with a colour band displayed
on top of the screen at times). I had to power down the system & bring it up again.So I disabled it
(I even tried compiling xlockmore from the source code - but no use).
Now I am facing the same problem with xv. Starting xv freezes my machine again.
A funny thing: After powercycling, I find the input file size to be zero.
Please note that these problems did not surface when I was running 3.3-RELEASE on the
same machine.
I don't know whether this has anything to do with XFree86 (I am using the one that came
with 4.3-RELEASE). I tried disabling moused & usbd too. No improvement.
Here is the dmesg output:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (65536K bytes)
config> di pcic0
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 60952576 (59524K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc044d09c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci0: <ATI Mach64-GU graphics accelerator> at 4.0
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x7000-0x700f at device 11.0 o
n pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x7800-0x781f mem 0x7200000-0x72fff
ff,0x7500000-0x7500fff irq 10 at device 12.0 on pci0
fxp0: Ethernet address 00:00:e2:13:49:17
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x7600000-0x7600fff irq 1
1 at device 18.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
ad0: 2014MB <QUANTUM FIREBALL SE2.1A> [4092/16/63] at ata0-master UDMA33
ad2: 2014MB <ST32122A> [4092/16/63] at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s2a
>How-To-Repeat:
Run xlockmore. Many times this freezes the system.
Starting xv also gives the same problem now.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106191535.f5JFZma28292>