Date: Sat, 19 Jun 1999 19:31:34 -0700 (PDT) From: mike@hyperreal.org To: freebsd-smp@freebsd.org Subject: working SMP motherboard for hardware list Message-ID: <19990620023134.6461.qmail@hyperreal.org>
next in thread | raw e-mail | index | archive | help
Hello, Not sure if this is who to send this to, but I have a possible addition to the SMP working motherboard list at http://www.freebsd.org/~fsmp/SMP/hardware.html: Micronics M54Pe revision B http://www.micronics.com/Micronics/support/archives/pentium.htm#prod_210A ...works fine with SMP kernel and default config, FreeBSD 3.2-RELEASE! Enjoy. - Mike ______________________________________________________________________ Mike Brown / Hyperreal | Director, Hyperreal Music Archive PO Box 61334 | http://www.hyperreal.org/music/ Denver CO 80206-8334 USA | Software Engineer, www.netIgnite.com =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: EBDA physical address: 0x0009fc30 signature: '_MP_' length: 16 bytes version: 1.1 checksum: 0x5a mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x0009fc44 signature: 'PCMP' base table length: 260 version: 1.1 checksum: 0x1e OEM ID: 'INTEL ' Product ID: '430 NX EISA ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 24 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x10 BSP, usable 5 2 12 0x03bf 1 0x10 AP, usable 5 2 12 0x03bf -- Bus: Bus ID Type 0 ISA 1 EISA 2 PCI -- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 0 0 2 0 INT conforms conforms 0 1 2 1 INT conforms conforms 0 0 2 2 INT conforms conforms 0 3 2 3 INT conforms conforms 0 4 2 4 INT conforms conforms 0 5 2 5 INT conforms conforms 0 6 2 6 INT conforms conforms 0 7 2 7 INT conforms conforms 0 8 2 8 INT conforms conforms 0 9 2 9 INT conforms conforms 0 10 2 10 INT conforms conforms 0 11 2 11 INT conforms conforms 0 12 2 12 INT conforms conforms 0 13 2 13 INT conforms conforms 0 14 2 14 INT conforms conforms 0 15 2 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 0 0 255 0 NMI active-hi edge 0 0 255 1 ------------------------------------------------------------------------------- # SMP kernel config file options: # Required: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optional (built-in defaults will work in most cases): #options NCPU=2 # number of CPUs #options NBUS=3 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs =============================================================================== To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990620023134.6461.qmail>