Date: Tue, 25 Apr 2000 10:18:40 -0400 From: "Charles Anderson" <caa@columbus.rr.com> To: Jonathan Chen <jon+fbsd@spock.org> Cc: Charles Anderson <caa@columbus.rr.com>, FreeBSD Mobile <freebsd-mobile@FreeBSD.ORG>, FreeBSD Config <freebsd-config@FreeBSD.ORG> Subject: Re: 3Com 3CXFE575BT Megahertz xjack cardbus adapter Message-ID: <20000425101840.A51324@midgard.dhs.org> In-Reply-To: <A7D0180351GZ7J8388.A4E2C06F852@msidl.d0.localhost>; from jon%2Bfbsd@spock.org on Mon, Apr 24, 2000 at 09:57:52PM -0400 References: <20000424094918.D92746@midgard.dhs.org> <A7D0180351GZ7J8388.A4E2C06F852@msidl.d0.localhost>
next in thread | previous in thread | raw e-mail | index | archive | help
--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
How do I tell what the PCI-Cardbus bridge is?
Oh here it is.
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at device 2.0 on pci0
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.1 on pci0
The system was installed from a 4.0-Release CD iso.
I'll attach the entire boot messages from /var/log/messages, too.
Thanks,
-Charlie
On Mon, Apr 24, 2000 at 09:57:52PM -0400, Jonathan Chen wrote:
> On Mon, Apr 24, 2000 at 09:49:18AM -0400, Charles Anderson wrote:
> > I installed 4.0-current on my Thinkpad 600X that I got from work, and I am trying
> > to get the pccard adapter recognized. It is a 3Com 3CXFE575BT cardbus 10/100
> > adapter with an xjack. Nothing seems to match in pccard.conf.sample and when
> > it tries to detect it says -
> > pccardd[50]:No card in database for ""("")
> >
> > Is this card supported at all? I spend most of my day running NT with FreeBSD
> > running under vmware, and vmware emulates a lnc card so that works just fine.
> > But I'd like to run it under FreeBSD native when I take it home.
>
> Cardbus is not supported under FreeBSD (at all) (yet). However, if you
> tell me what PCI-Cardbus bridge you have, I just might have a kludge driver
> you can use for the time being.
>
> --
> (o_ 1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2-1-2 _o)
> \\\_\ Jonathan Chen jon at spock.org /_///
> <____) Will build secret weapons of mass destruction for food. (____>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
--
Charles Anderson caa@columbus.rr.com
No quote, no nothin'
--Nq2Wo0NMKNjxTN9z
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="boot.mesg"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #1: Mon Apr 3 11:16:18 EDT 2000
root@domino:/usr/src/sys/compile/DOMINO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (498.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 335347712 (327488K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 322113536 (314564K bytes)
Preloaded elf kernel "DOMINO" at 0xc02cb000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02cb09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NeoMagic MagicMedia 256ZX SVGA controller> at 0.0 irq 11
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50103000-0x50103fff irq 11 at device 2.0 on pci0
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.1 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x0449) at 3.0 irq 11
pci0: <unknown card> (vendor=0x1013, dev=0x6003) at 6.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4000-0x401f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0xefa0-0xefaf irq 9 at device 7.3 on pci0
intpm0: I/O mapped efa0
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped ef00
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
ad0: 11509MB <IBM-DARA-212000> [24944/15/63] at ata0-master using UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2302> at ata1-master using WDMA2
Mounting root from ufs:/dev/ad0s3a
pccard: card inserted, slot 0
--Nq2Wo0NMKNjxTN9z--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000425101840.A51324>