Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 24 Jan 2001 01:05:35 +0100
From:      Bernd Walter <ticso@cicely5.cicely.de>
To:        freebsd-alpha@FreeBSD.ORG
Subject:   Re: -current failing on PC164
Message-ID:  <20010124010535.A29018@cicely5.cicely.de>
In-Reply-To: <20010123214322.A26643@cicely5.cicely.de>; from ticso@cicely5.cicely.de on Tue, Jan 23, 2001 at 09:43:22PM %2B0100
References:  <20010123214322.A26643@cicely5.cicely.de>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jan 23, 2001 at 09:43:22PM +0100, Bernd Walter wrote:
> Digital AlphaPC 164 500 MHz Console V5.5-1, Jul 14 1999 12:37:45
> 
> CPU 0 booting
> 
> (boot dkb0.0.0.5.0 -flags 0)
> block 0 of dkb0.0.0.5.0 is a valid boot block
> reading 15 blocks from dkb0.0.0.5.0
> bootstrap code read in
> base = 180000, image_start = 0, image_bytes = 1e00
> initializing HWRPB at 2000
> initializing page table at 172000
> initializing machine state
> setting affinity to the primary CPU
> jumping to bootstrap code
> Loading /boot/loader
> *** no timer interrupts on CPU 0 ***
> Console: SRM firmware console
> VMS PAL rev: 0x1000900010115
> OSF PAL rev: 0x1000800020117
> Switch to OSF PAL code succeeded.
> 
> FreeBSD/alpha SRM disk boot, Revision 1.1
> (ticso@cicely9.cicely.de, Tue Jan 23 12:56:58 CET 2001)
> Memory: 262144 k
> |
> /boot/kernel/kernel data=0x29d768+0x5f5f2 syms=[0x8+0x3ad28+0x8+0x2b9e2]
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel]...               
> Entering kernel at 0xfffffc000032a240...
> sio1: gdb debugging port
> Unrecognized boot flag '0'.
> Copyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> 
> fatal kernel trap:
> 
>     trap entry = 0x4 (unaligned access fault)
>     a0         = 0xfffffc000055eec7
>     a1         = 0x29
>     a2         = 0x14
>     pc         = 0xfffffc00003a3270
>     ra         = 0xfffffc00003a3258
>     curproc    = 0xfffffc00005d3038
>         pid = 0, comm = 
> 
> Stopped at      0xfffffc00003a3270:     ldl     t0,0x8(s0) <0xfffffc00005bb568> <t0=0xfffffc000055ee9f,s0=0xfffffc00005bb560>
> db> trace
> (null)() at 0xfffffc00003a3270

After removing several debugging options from the kernel such as
mutex_debug, ktr, ... it finaly booted.
I recheck if I didn't made something wrong with them although the
config worked with an earlier source.

-- 
B.Walter              COSMO-Project         http://www.cosmo-project.de
ticso@cicely.de         Usergroup           info@cosmo-project.de



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010124010535.A29018>