Date: Thu, 15 Nov 2001 12:04:32 +0100 From: Dirk Froemberg <dirk@freebsd.org> To: stable@freebsd.org Subject: Re: kernel panic if using SCSI CDROM as root device Message-ID: <20011115120432.A18404@physik.TU-Berlin.DE> In-Reply-To: <20011115003027.A87962@physik.TU-Berlin.DE>; from dirk@freebsd.org on Thu, Nov 15, 2001 at 12:30:27AM %2B0100 References: <20011115003027.A87962@physik.TU-Berlin.DE>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi!
On Thu, Nov 15, 2001 at 12:30:27AM +0100, Dirk Froemberg wrote:
> I build an CDROM image with a boot image containing a GENERIC kernel
> and an "ordinary" FreeBSD-4.4-STABLE installation.
>
> After booting the kernel I get the "mountroot> " prompt. On systems
> having an ATAPI-CDROM mounting the CD as a root filesystem works
> (giving cd9660:/dev/acd0c as root), but not on SCSI systems (giving
> cd9660:/dev/cd0c as root). On such systems a kernel panic occurs
> ("Fatal trap 12: page fault while in kernel mode").
Now, some more debug information...
Regards Dirk
ok boot -C
/kernel text=0x203a28 data=0x39464+0x19cac syms=[0x4+0x30df0+0x4+0x353fc]
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-STABLE #0: Thu Nov 15 11:18:56 CET 2001
dirk@bach:/usr/obj/usr/src/sys/CDROM
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 166527838 Hz
CPU: Pentium/P55C (166.53-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 61489152 (60048K bytes)
Preloaded elf kernel "kernel" at 0xc03bf000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fde70
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C586 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586 ATA33 controller> port 0x6400-0x640f at device 7.1 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6c00-0x6c3f mem 0xe9000000-0xe901ffff,0xe9020000-0xe9020fff irq 9 at device 9.0 on pci0
fxp0: Ethernet address 00:02:b3:40:db:8c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0x7000-0x70ff mem 0xe9021000-0xe9021fff irq 12 at device 10.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 12.0 irq 10
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xca000-0xcf7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
Waiting 15 seconds for SCSI devices to settle
Mounting root from cd9660:cd0a
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: cd present [66018 x 2048 byte records]
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAB3091SP 0109> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8703MB (17824700 512 byte sectors: 255H 63S/T 1109C)
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x28
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc01b51aa
stack pointer = 0x10:0xc03e1db4
frame pointer = 0x10:0xc03e1dd8
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = none
kernel: type 12 trap, code=0
Stopped at dsioctl+0x42: movl 0xc(%eax),%ecx
db> trace
dsioctl(c0900b80,40046304,c03e1e28,1,c090e844) at dsioctl+0x42
diskioctl(c0900b80,40046304,c03e1e28,1,c0355b60) at diskioctl+0x6f
iso_get_ssector(c0900b80,c0355b60,0,c0909e00,c0355b60) at iso_get_ssector+0x2e
iso_mountroot(c0909e00,c0355b60,c03e1fb0,c0900e80,c090df30) at iso_mountroot+0x47
cd9660_mount(c0909e00,0,0,0,c0355b60) at cd9660_mount+0x2c
vfs_mountroot_try(c02dc78a) at vfs_mountroot_try+0x13d
vfs_mountroot(0,3dec00,3e6000,0,c0120670) at vfs_mountroot+0x3c
mi_startup(0,0,0,0,0) at mi_startup+0x68
begin() at begin+0x47
--
Dirk Froemberg
FreeBSD: The Power to Serve! http://www.FreeBSD.org/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011115120432.A18404>