Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 31 Jan 2008 15:00:20 -0500
From:      Mike Tancsa <mike@sentex.net>
To:        "Steven Hartland" <killing@multiplay.co.uk>
Cc:        freebsd-performance@freebsd.org, freebsd-stable@freebsd.org
Subject:   Re: newfs + gstat locks entire machine for 20seconds
Message-ID:  <200801311958.m0VJwF0f090920@lava.sentex.ca>
In-Reply-To: <015901c863a8$064a5750$b6db87d4@multiplay.co.uk>
References:  <200801302307.XAA22476@sopwith.solgatos.com> <015901c863a8$064a5750$b6db87d4@multiplay.co.uk>

next in thread | previous in thread | raw e-mail | index | archive | help
At 08:24 PM 1/30/2008, Steven Hartland wrote:
>The plot thickens.... This stall is not just related to newfs you have to
>have gstat running as well. If I do the newfs without gstat running then
>no stall occurs. As soon as Im running gstat while doing the newfs then
>everything locks as described.

Strange, I see the same thing sometimes.

While running

while true
do
date
sleep .5
done


Thu Jan 31 14:55:42 EST 2008
Thu Jan 31 14:55:42 EST 2008
Thu Jan 31 14:55:43 EST 2008
Thu Jan 31 14:55:43 EST 2008
Thu Jan 31 14:55:44 EST 2008
Thu Jan 31 14:55:44 EST 2008
Thu Jan 31 14:55:50 EST 2008
Thu Jan 31 14:55:50 EST 2008
Thu Jan 31 14:55:51 EST 2008
Thu Jan 31 14:55:51 EST 2008
Thu Jan 31 14:55:52 EST 2008
Thu Jan 31 14:55:52 EST 2008
Thu Jan 31 14:55:53 EST 2008
Thu Jan 31 14:55:53 EST 2008
Thu Jan 31 14:55:54 EST 2008

You can see it from 44 to 50 seconds,

This is AMD64

da0 at arcmsr0 bus 0 target 0 lun 0
da0: <Areca ARC-1210-VOL#00 R001> Fixed Direct Access SCSI-5 device
da0: 166.666MB/s transfers (83.333MHz DT, offset 32, 16bit)
da0: 305175MB (624999424 512 byte sectors: 255H 63S/T 38904C)

arcmsr0: <Areca SATA Host Adapter RAID Controller
 > mem 0xe8600000-0xe8600fff,0xe8000000-0xe83fffff irq 18 at device 
14.0 on pci2
ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.43 2007-4-17
arcmsr0: [ITHREAD]



>Running truss on gstat shows the issue / cause I believe but I dont
>know what it means:-
>[truss -o t.txt -p 61629 -d]
>9.008933817 nanosleep({1.000000000})         = 0 (0x0)
>9.008969017 gettimeofday({1201742426.147393},0x0) = 0 (0x0)
>9.009009804 poll({0/POLLIN},1,0)         = 0 (0x0)
>9.009040534 gettimeofday({1201742426.147465},0x0) = 0 (0x0)
>9.009076852 clock_gettime(0,{1201742426.147501706}) = 0 (0x0)
>9.009294477 sigaction(SIGTSTP,{ SIG_IGN SA_RESTART ss_t },{ 
>0x800cb2470 SA_RESTART ss_t }) = 0 (0x0)
>9.009335823 poll({0/POLLIN},1,0)         = 0 (0x0)
>9.009387785 poll({0/POLLIN},1,0)         = 0 (0x0)
>9.009457626 write(1,"\^[[4;11H 5\^[[6C2     32  467.8"...,213) = 213 (0xd5)
>9.009488636 sigaction(SIGTSTP,{ 0x800cb2470 SA_RESTART ss_t },0x0) = 0 (0x0)
>10.009930312 nanosleep({1.000000000})        = 0 (0x0)
>10.009963836 gettimeofday({1201742427.148388},0x0) = 0 (0x0)
>10.010005182 poll({0/POLLIN},1,0)        = 0 (0x0)
>10.010036192 gettimeofday({1201742427.148461},0x0) = 0 (0x0)
>10.010073068 clock_gettime(0,{1201742427.148497922}) = 0 (0x0)
>10.010292369 
>mmap(0x801000000,1048576,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) 
>= 34376515584 (0x801000000)
>10.010327569 
>__sysctl(0x7fffffffe6c0,0x2,0x7fffffffe650,0x7fffffffe6b8,0x800844970,0x11) 
>= 0 (0x0)
>25.052947791 
>__sysctl(0x7fffffffe650,0x3,0x801000000,0x7fffffffe720,0x0,0x0) = 0 (0x0)
>25.054030610 munmap(0x801000000,1048576)     = 0 (0x0)
>25.055022356 sigaction(SIGTSTP,{ SIG_IGN SA_RESTART ss_t },{ 
>0x800cb2470 SA_RESTART ss_t }) = 0 (0x0)
>25.055067892 poll({0/POLLIN},1,0)        = 0 (0x0)
>25.055130470 poll({0/POLLIN},1,0)        = 0 (0x0)
>25.055230203 write(1,"\^[[4;11H1\^[[7C4     64  203.4"...,203) = 203 (0xcb)
>25.055263448 sigaction(SIGTSTP,{ 0x800cb2470 SA_RESTART ss_t },0x0) = 0 (0x0)
>26.055866597 nanosleep({1.000000000})        = 0 (0x0)
>26.055900400 gettimeofday({1201742443.194324},0x0) = 0 (0x0)
>26.055940070 poll({0/POLLIN},1,0)        = 0 (0x0)
>26.055969962 gettimeofday({1201742443.194394},0x0) = 0 (0x0)
>26.056009073 clock_gettime(0,{1201742443.194433649}) = 0 (0x0)
>26.056240388 sigaction(SIGTSTP,{ SIG_IGN SA_RESTART ss_t },{ 
>0x800cb2470 SA_RESTART ss_t }) = 0 (0x0)
>26.056280896 poll({0/POLLIN},1,0)        = 0 (0x0)
>26.056334534 poll({0/POLLIN},1,0)        = 0 (0x0)
>26.056420299 poll({0/POLLIN},1,0)        = 0 (0x0)
>26.056485112 write(1,"\^[[1;6H6.046s  w: 1.000s\^[[4;5"...,305) = 305 (0x131)
>26.056516121 sigaction(SIGTSTP,{ 0x800cb2470 SA_RESTART ss_t },0x0) = 0 (0x0)
>27.056863372 nanosleep({1.000000000})        = 0 (0x0)
>[/truss -o t.txt -p 61629 -d]
>
>================================================
>This e.mail is private and confidential between Multiplay (UK) Ltd. 
>and the person or entity to whom it is addressed. In the event of 
>misdirection, the recipient is prohibited from using, copying, 
>printing or otherwise disseminating it or any information contained in it.
>In the event of misdirection, illegible or incomplete transmission 
>please telephone +44 845 868 1337
>or return the E.mail to postmaster@multiplay.co.uk.
>
>_______________________________________________
>freebsd-performance@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-performance
>To unsubscribe, send any mail to "freebsd-performance-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200801311958.m0VJwF0f090920>