Date: Thu, 15 Apr 2004 13:38:29 -0400 From: Joe Marcus Clarke <marcus@marcuscom.com> To: Jeffrey Racine <jracine@maxwell.syr.edu> Cc: freebsd-gnome@freebsd.org Subject: Re: Evolution, gnome 2.6, fresh compile will not run... Message-ID: <1082050709.51009.7.camel@gyros> In-Reply-To: <1082049659.644.10.camel@jracine.maxwell.syr.edu> References: <1082049659.644.10.camel@jracine.maxwell.syr.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-pbKHIW+q5eXryLAhL80P Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Thu, 2004-04-15 at 13:20, Jeffrey Racine wrote: > Hi. >=20 > I upgraded to gnome 2.6 recently, and am trying to install evolution but > when I run the program it stops with the following message: >=20 > (evolution:21647): GLib-GObject-WARNING **: g_object_set_valist: > construct property "type" for object `ESplash' can't be set after > construction > /libexec/ld-elf.so.1: > /usr/X11R6/lib/evolution/1.4/components/libevolution-addressbook.so: > Undefined symbol "e_book_get_config_database" >=20 > Any suggestions most welcome! uname and dmesg follow. Rebuild gal2, gtkhtml3, libsoup, and evolution. Joe >=20 > -- uname -a >=20 > FreeBSD jracine-laptop.maxwell.syr.edu 5.2-CURRENT FreeBSD 5.2-CURRENT > #0: Wed Apr 14 14:04:22 EDT 2004 =20 > root@jracine-laptop.maxwell.syr.edu:/usr/obj/usr/src/sys/INSPIRON i386 >=20 > -- dmesg >=20 > [jracine@jracine-laptop jracine]$ dmesg > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 5.2-CURRENT #0: Wed Apr 14 14:04:22 EDT 2004 > root@jracine-laptop.maxwell.syr.edu:/usr/obj/usr/src/sys/INSPIRON > Preloaded elf kernel "/boot/kernel/kernel" at 0xc081c000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc081c1cc. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) M processor 1300MHz (1298.90-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0x695 Stepping =3D 5 > =20 > Features=3D0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMO= V,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> > real memory =3D 402317312 (383 MB) > avail memory =3D 383959040 (366 MB) > random: <entropy source, Software, Yarrow> > Pentium Pro MTRR support enabled > cpu0 on motherboard > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <DELL CPi R > on motherboard > acpi0: [GIANT-LOCKED] > pcibios: BIOS version 2.10 > Found $PIR table, 9 entries at 0xc00fc590 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 > acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > acpi_cmbat0: <Control Method Battery> on acpi0 > acpi_cmbat1: <Control Method Battery> on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib0: slot 29 INTA is routed to irq 11 > pcib0: slot 29 INTB is routed to irq 11 > pcib0: slot 29 INTC is routed to irq 11 > pcib0: slot 29 INTD is routed to irq 11 > pcib0: slot 31 INTB is routed to irq 11 > pcib0: slot 31 INTB is routed to irq 11 > agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at > device 0.0 on pci0 > agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib1: slot 0 INTA is routed to irq 11 > pci1: <display, VGA> at device 0.0 (no driver attached) > uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f > irq 11 at device 29.0 on pci0 > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f > irq 11 at device 29.1 on pci0 > uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev > 1.10/3.00, addr 2, iclass 3/1 > ums0: 3 buttons and Z dir. > uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f > irq 11 at device 29.2 on pci0 > uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > umass0: NEC NEC USB UF000x, rev 1.10/1.50, addr 2 > pci0: <serial bus, USB> at device 29.7 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > pcib2: slot 0 INTA is routed to irq 11 > pcib2: slot 3 INTA is routed to irq 11 > bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem > 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2 > bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfaff0000 > miibus0: <MII bus> on bge0 > brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, > 1000baseTX-FDX, auto > bge0: Ethernet address: 00:0b:db:a1:c7:a3 > bge0: [GIANT-LOCKED] > cbb0: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.0 on pci2 > cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > pcib2: slot 1 INTA is routed to irq 11 > cbb1: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.1 on pci2 > cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6001000 > cardbus1: <CardBus bus> on cbb1 > pccard1: <16-bit PCCard bus> on cbb1 > pcib2: slot 1 INTA is routed to irq 11 > pci2: <network> at device 3.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH4 UDMA100 controller> port > 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device > 31.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x3f4 > ata0: at 0x1f0 irq 14 on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x374 > ata1: at 0x170 irq 15 on atapci0 > pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem > 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on > pci0 > pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb800 > pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xbc40 > pcm0: [GIANT-LOCKED] > pcm0: <SigmaTel STAC9750/51 AC97 Codec> > pci0: <simple comms> at device 31.6 (no driver attached) > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model GlidePoint, device ID 0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 > pmtimer0 on isa0 > fdc0: cannot reserve I/O port range (6 ports) > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > Timecounter "TSC" frequency 1298902178 Hz quality 800 > Timecounters tick every 10.000 msec > acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% > acpi_cpu0: Performance states changed > ad0: 28615MB <HITACHI_DK23EA-30> [58140/16/63] at ata0-master UDMA100 > pccard1: <unknown card> (manufacturer=3D0xffff, product=3D0x0001) at > function 0 > pccard1: CIS info: O2Micro, SmartCardBus Reader, V1.0 > (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition > (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 > (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred > (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <NEC USB UF000x 1.50> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > Mounting root from ufs:/dev/ad0s1a --=20 PGP Key : http://www.marcuscom.com/pgp.asc --=-pbKHIW+q5eXryLAhL80P Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (FreeBSD) iD8DBQBAfsiVb2iPiv4Uz4cRAgZfAJ9oPpUjeFnBfApKubzVtaiJL9UuMwCfUw+9 ToIAtY2hyTo0M00hz5VVW7E= =9YQT -----END PGP SIGNATURE----- --=-pbKHIW+q5eXryLAhL80P--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1082050709.51009.7.camel>