Date: Mon, 26 Jun 2006 15:43:36 -0700 From: "Derrick Ryalls" <ryallsd@gmail.com> To: "=?ISO-8859-1?Q?Erik_N=F8rgaard?=" <norgaard@locolomo.org> Cc: Lowell Gilbert <freebsd-questions-local@be-well.ilk.org>, FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: iwi-firmware Message-ID: <d5eb95fc0606261543l7687c19ao36bf1716eeef1426@mail.gmail.com> In-Reply-To: <44A052CA.9070104@locolomo.org> References: <d5eb95fc0606252018t5cb6129bu404f92e450b28f73@mail.gmail.com> <44ejxbtzqo.fsf@be-well.ilk.org> <44A052CA.9070104@locolomo.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> Lowell Gilbert wrote: > > "Derrick Ryalls" <ryallsd@gmail.com> writes: > > > >> Prior to updating to 6.1, my Intel 2200 BG worked fairly well using > >> iwi-firmware and wpa_supplicant. Now, the firmware fails to load so I > >> cannot connect. I did some searching and some people recommend > >> installing iwi-firmware-kmod. When I try to do so, it is marked as > >> ignored and is uninstallable. Another suggestion is to use code in > >> /usr/src/sys/dev/iwi but I don't see a make file and I haven't a clue > >> on what to do with that code anyway. > >> > >> Does anyone know what I need to do to get this nic working again? > >> > >> #uname -a > >> 6.1-STABLE FreeBSD 6.1-STABLE #1: Wed Jun 7 03:18:16 PDT 2006 > > > > Can you be more precise about what goes wrong? > > http://www.freebsd.org/doc/en_US.ISO8859-1/articles/freebsd-questions/index.html > > > > I also suspect that you would have better luck installing the ports if > > you updated your ports tree. But that's just a guess. > > Are you using iwi-firmware from ports? there seems to be a perfectly > working driver, > > # kldload if_iwi > > That's what people suggest you to compile from sys/dev/iwi, but it's > also a loadable as kernel module. If it is not installed in > /boot/kernel, then it will also be built with the normal kernel build > proceedure. > Sorry for the lack of details. Sleep deprivation and hardware troubleshooting shouldn't be mixed. Previously, I was using the iwi-firmware port rather successfully, based on this webpage http://damien.bergamini.free.fr/ipw/iwi-freebsd.html At the moment, I do have the device listed under ifconfig iwi0 but I cannot associate with my AP. When I go to do a "iwicontrol -i iwi0 -d /boot/firmware/if_iwi -m bss" I currently get an error message in the /var/log/messages (sorry, can't access the machine to get the message) but I think it was something about the device timing out. Checking the help files for the error messages states the the error message should not happen. When I did the searching, several posts mentioned that iwi-firmware didn't work for them on 6.1 when it had on previous versions. Later I can update my ports to see if iwi-firmware-kmod now has the ignore setting removed, but according to http://www.freebsd.org/cgi/cvsweb.cgi/ports/net/iwi-firmware-kmod/ the port hasn't been touched in about 2 months (unless I am reading something wrong). To sorta summarize, these are example steps that I used to take to get on wireless: iwicontrol -i iwi0 -d /boot/firmware/if_iwi -m bss ifconfig iwi0 up wpa_supplicant (args) dhclient iwi0 But now, the first step fails. The device is still present under ifconfig though. My world/kernel is only a couple weeks old, perhaps I cvsup'ed at exactly the wrong time (during some commit)?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d5eb95fc0606261543l7687c19ao36bf1716eeef1426>