Date: Sat, 24 Mar 2007 14:22:20 +0100 From: Ed Schouten <ed@fxq.nl> To: stable@freebsd.org Subject: Problems detecting S-ATA DVD-RW drive with AHCI enabled Message-ID: <20070324132220.GJ6734@hoeg.nl>
next in thread | raw e-mail | index | archive | help
--W2ydbIOJmkm74tJ2 Content-Type: multipart/mixed; boundary="HcccYpVZDxQ8hzPO" Content-Disposition: inline --HcccYpVZDxQ8hzPO Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello, Yesterday I bought a DVD-RW drive. When I choose to use IDE (checkbox in my BIOS), the drive gets detected and I can use it: dmesg: | atapci1: <Intel ICH8 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083= ,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f irq 19 at device 3= 1.5 on pci0 | ata4: <ATA channel 0> on atapci1 | ata5: <ATA channel 1> on atapci1 | ... | acd0: DVDR <Optiarc DVD RW AD-7170S/1.00> at ata4-master SATA150 atacontrol: | ATA channel 2: | Master: ad0 <WDC WD3000JS-00PDB0/21.00M21> Serial ATA II | Slave: no device present | ATA channel 3: | Master: ad1 <WDC WD1600JS-00NCB1/10.02E02> Serial ATA II | Slave: no device present | ATA channel 4: | Master: acd0 <Optiarc DVD RW AD-7170S/1.00> Serial ATA v1.0 | Slave: no device present | ATA channel 5: | Master: no device present | Slave: no device present The disadvantage of IDE is that my disks run at SATA150, while the hard disks on ata2 and ata3 can use SATA300. So when I enable AHCI, the device isn't detected anymore: atacontrol: | ATA channel 2: | Master: ad0 <WDC WD3000JS-00PDB0/21.00M21> Serial ATA II | Slave: no device present | ATA channel 3: | Master: ad1 <WDC WD1600JS-00NCB1/10.02E02> Serial ATA II | Slave: no device present | ATA channel 4: | Master: no device present | Slave: no device present | ATA channel 5: | Master: no device present | Slave: no device present Not even a detach/attach on channel 4 can enable the drive: | # atacontrol detach ata4 | # atacontrol attach ata4 | Master: no device present | Slave: no device present The strange thing is that Windows Vista does recognize the drive when I enable AHCI in the BIOS. I've attached two dmesg'es. One contains the verbose output of my machine with IDE enabled. The other one uses AHCI. Yours, --=20 Ed Schouten <ed@fxq.nl> WWW: http://g-rave.nl/ --HcccYpVZDxQ8hzPO Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.ide" Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Thu Mar 15 20:19:47 CET 2007 root@flippo.fxq.nl:/usr/obj/usr/src/sys/FLIPPO Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80692000. INTR: Adding local APIC 0 as a target ACPI APIC Table: <A M I OEMAPIC > Calibrating clock(s) ... i8254 clock: 1193162 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2128385264 Hz CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2128.39-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 1073348608 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x000000000078f000 - 0x000000003e15afff, 1033682944 bytes (252364 pages) avail memory = 1027682304 (980 MB) INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 mem: <memory> io: <I/O> acpi0: <A M I OEMRSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000094 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29a08086) acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_perf0: <ACPI CPU Frequency Control> on cpu0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x29a0, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x29a1, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2834, revid=0x02 bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000dc00, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2835, revid=0x02 bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type 4, range 32, base 0000e000, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283a, revid=0x02 bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base febffc00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x283f, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2845, revid=0x02 bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2830, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 map[20]: type 4, range 32, base 0000d480, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2831, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0000d800, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2832, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[20]: type 4, range 32, base 0000d880, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2836, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base febff800, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xf2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0105, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2810, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2820, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ec00, size 3, enabled map[14]: type 4, range 32, base 0000e880, size 2, enabled map[18]: type 4, range 32, base 0000e800, size 3, enabled map[1c]: type 4, range 32, base 0000e480, size 2, enabled map[20]: type 4, range 32, base 0000e400, size 4, enabled map[24]: type 4, range 32, base 0000e080, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x283e, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type 1, range 32, base 00000000, size 8, memory disabled map[20]: type 4, range 32, base 00000400, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2825, revid=0x02 bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 3, enabled map[14]: type 4, range 32, base 0000d080, size 2, enabled map[18]: type 4, range 32, base 0000d000, size 3, enabled map[1c]: type 4, range 32, base 0000cc00, size 2, enabled map[20]: type 4, range 32, base 0000c880, size 4, enabled map[24]: type 4, range 32, base 0000c800, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf4900000-0xfe9fffff pcib1: prefetched decode 0xcfe00000-0xdfdfffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x0140, revid=0xa2 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base f8000000, size 26, enabled pcib1: requested memory range 0xf8000000-0xfbffffff: good map[14]: type 3, range 64, base d0000000, size 27, enabled pcib1: requested memory range 0xd0000000-0xd7ffffff: good map[1c]: type 1, range 64, base fd000000, size 24, enabled pcib1: requested memory range 0xfd000000-0xfdffffff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 17 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebffc00 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 ehci0: [GIANT-LOCKED] usb2: waiting for BIOS to give up control usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xdfe00000-0xdfefffff pci3: <ACPI PCI bus> on pcib2 pci3: physical bus=3 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib3: secondary bus 2 pcib3: subordinate bus 2 pcib3: I/O decode 0xa000-0xafff pcib3: memory decode 0xfea00000-0xfeafffff pcib3: prefetched decode 0xfff00000-0xfffff pci2: <ACPI PCI bus> on pcib3 pci2: physical bus=2 found-> vendor=0x10ec, dev=0x8168, revid=0x01 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type 4, range 32, base 0000a800, size 8, enabled pcib3: requested I/O range 0xa800-0xa8ff: in range map[18]: type 1, range 64, base feaff000, size 12, enabled pcib3: requested memory range 0xfeaff000-0xfeafffff: good pcib3: matched entry for 2.0.INTA pcib3: slot 0 INTA hardwired to IRQ 19 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa800 pcib3: re0 requested I/O range 0xa800-0xa8ff: in range pcib3: re0 requested I/O range 0xa800-0xa8ff: in range pcib3: re0 requested I/O range 0xa800-0xa8ff: in range re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2 pcib3: re0 requested I/O range 0xa800-0xa8ff: in range miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S media interface> on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:18:f3:75:0a:0d ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52 re0: [MPSAFE] re0: [FAST] uhci2: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 23 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53 uhci2: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 19 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 uhci3: [GIANT-LOCKED] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 18 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880 uhci4: [GIANT-LOCKED] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebff800 ehci1: [GIANT-LOCKED] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <EHCI (generic) USB 2.0 controller> on ehci1 usb6: USB revision 2.0 uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub6: 6 ports with 6 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xb000-0xbfff pcib4: memory decode 0x0-0x0 pcib4: prefetched decode 0x0-0x0 pcib4: Subtractively decoded bridge. pci4: <ACPI PCI bus> on pcib4 pci4: physical bus=4 found-> vendor=0x1102, dev=0x0002, revid=0x06 bus=4, slot=2, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=3 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b880, size 5, enabled pcib4: requested I/O range 0xb880-0xb89f: in range pcib4: matched entry for 4.2.INTA pcib4: slot 2 INTA hardwired to IRQ 23 found-> vendor=0x1102, dev=0x7002, revid=0x06 bus=4, slot=2, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000bc00, size 3, enabled pcib4: requested I/O range 0xbc00-0xbc07: in range pcm0: <Creative EMU10K1> port 0xb880-0xb89f irq 23 at device 2.0 on pci4 pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xb880 emu: setmap (a01000, 800), nseg=1, error=0 emu: setmap (a20000, 1000), nseg=1, error=0 pcm0: <TriTech TR28602 AC97 Codec (id = 0x54524123)> pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement pcm0: ac97 codec dac ready count: 0 pcm0: [MPSAFE] emu: setmap (9e8000, 1000), nseg=1, error=0 emu: setmap (9ae000, 1000), nseg=1, error=0 emu: setmap (9ac000, 1000), nseg=1, error=0 emu: setmap (a2a000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap 9e7000, 1000; 0xffffff00009e7000 -> 9e7000 pcm0: sndbuf_setmap a05000, 1000; 0xffffff0000a05000 -> a05000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe400 atapci0: [MPSAFE] ata2: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xec00 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe880 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe800 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xe480 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata3: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci1: <Intel ICH8 SATA300 controller> port 0xd400-0xd407,0xd080-0xd083,0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc88f,0xc800-0xc80f irq 19 at device 31.5 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc880 atapci1: [MPSAFE] ata4: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd400 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd080 ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata4: [MPSAFE] ata5: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd000 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc00 ata5: reset tp1 mask=03 ostat0=7f ostat1=7f ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff ata5: reset tp2 stat0=ff stat1=ff devices=0x0 ata5: [MPSAFE] acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54 sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 fb: new array size 4 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices uhub7: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.10, addr 2 uhub7: 3 ports with 2 removable, bus powered ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1 ums0: 3 buttons and Z dir. ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 4, iclass 3/1 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 uhid0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 4, iclass 3/1 Device configuration finished. lapic: Divisor 2, Frequency 133023696 hz Timecounter "TSC" frequency 2128385264 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: 286168MB <WDC WD3000JS-00PDB0 21.00M21> at ata2-master SATA150 ad0: 586072368 sectors [581421C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad1: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata3-master SATA150 ad1: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad1 GEOM_MIRROR: Device datadump created (id=2959370996). GEOM_MIRROR: Device datadump: provider ad0s3 detected. GEOM_MIRROR: Device datadump: provider ad1 detected. GEOM_MIRROR: Device datadump: provider ad1 activated. GEOM_MIRROR: Device datadump: provider ad0s3 activated. GEOM_MIRROR: Device datadump: provider mirror/datadump launched. ata4: reiniting channel .. ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata4: reinit done .. ata4: reiniting channel .. ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata4: reinit done .. ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire acd0: <Optiarc DVD RW AD-7170S/1.00> DVDR drive at ata4 as master acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 17 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init --HcccYpVZDxQ8hzPO Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.ahci" Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Thu Mar 15 20:19:47 CET 2007 root@flippo.fxq.nl:/usr/obj/usr/src/sys/FLIPPO Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80692000. INTR: Adding local APIC 0 as a target ACPI APIC Table: <A M I OEMAPIC > Calibrating clock(s) ... i8254 clock: 1193128 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2128382272 Hz CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2128.38-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,XTPR,<b15>> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 1073348608 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages) 0x000000000078f000 - 0x000000003e15afff, 1033682944 bytes (252364 pages) avail memory = 1027678208 (980 MB) INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 mem: <memory> io: <I/O> acpi0: <A M I OEMRSDT> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000094 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29a08086) acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_perf0: <ACPI CPU Frequency Control> on cpu0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x29a0, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x29a1, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2834, revid=0x02 bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000e000, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2835, revid=0x02 bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type 4, range 32, base 0000e080, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x283a, revid=0x02 bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base febff400, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x283f, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2845, revid=0x02 bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD pcib0: slot 28 INTD hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2830, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 map[20]: type 4, range 32, base 0000d800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2831, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0000d880, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2832, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[20]: type 4, range 32, base 0000dc00, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2836, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base febff000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xf2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0105, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2810, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2824, revid=0x02 bus=0, slot=31, func=2 class=01-06-01, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 16 messages map[10]: type 4, range 32, base 0000ec00, size 3, enabled map[14]: type 4, range 32, base 0000e880, size 2, enabled map[18]: type 4, range 32, base 0000e800, size 3, enabled map[1c]: type 4, range 32, base 0000e480, size 2, enabled map[20]: type 4, range 32, base 0000e400, size 5, enabled map[24]: type 1, range 32, base febff800, size 11, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x283e, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type 1, range 32, base 00000000, size 8, memory disabled map[20]: type 4, range 32, base 00000400, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf4900000-0xfe9fffff pcib1: prefetched decode 0xcfe00000-0xdfdfffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x0140, revid=0xa2 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base f8000000, size 26, enabled pcib1: requested memory range 0xf8000000-0xfbffffff: good map[14]: type 3, range 64, base d0000000, size 27, enabled pcib1: requested memory range 0xd0000000-0xd7ffffff: good map[1c]: type 1, range 64, base fd000000, size 24, enabled pcib1: requested memory range 0xfd000000-0xfdffffff: good pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 17 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe080 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebff400-0xfebff7ff irq 18 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebff400 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51 ehci0: [GIANT-LOCKED] usb2: waiting for BIOS to give up control usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: secondary bus 3 pcib2: subordinate bus 3 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xdfe00000-0xdfefffff pci3: <ACPI PCI bus> on pcib2 pci3: physical bus=3 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pcib3: secondary bus 2 pcib3: subordinate bus 2 pcib3: I/O decode 0xb000-0xbfff pcib3: memory decode 0xfea00000-0xfeafffff pcib3: prefetched decode 0xfff00000-0xfffff pci2: <ACPI PCI bus> on pcib3 pci2: physical bus=2 found-> vendor=0x10ec, dev=0x8168, revid=0x01 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 MSI supports 2 messages, 64 bit map[10]: type 4, range 32, base 0000b800, size 8, enabled pcib3: requested I/O range 0xb800-0xb8ff: in range map[18]: type 1, range 64, base feaff000, size 12, enabled pcib3: requested memory range 0xfeaff000-0xfeafffff: good pcib3: matched entry for 2.0.INTA pcib3: slot 0 INTA hardwired to IRQ 19 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb800 pcib3: re0 requested I/O range 0xb800-0xb8ff: in range pcib3: re0 requested I/O range 0xb800-0xb8ff: in range pcib3: re0 requested I/O range 0xb800-0xb8ff: in range re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2 pcib3: re0 requested I/O range 0xb800-0xb8ff: in range miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S media interface> on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: bpf attached re0: Ethernet address: 00:18:f3:75:0a:0d ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52 re0: [MPSAFE] re0: [FAST] uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 53 uhci2: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci2 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880 uhci3: [GIANT-LOCKED] usb4: <UHCI (generic) USB controller> on uhci3 usb4: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci4: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00 uhci4: [GIANT-LOCKED] usb5: <UHCI (generic) USB controller> on uhci4 usb5: USB revision 1.0 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfebff000-0xfebff3ff irq 23 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebff000 ehci1: [GIANT-LOCKED] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <EHCI (generic) USB 2.0 controller> on ehci1 usb6: USB revision 2.0 uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub6: 6 ports with 6 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xc000-0xcfff pcib4: memory decode 0x0-0x0 pcib4: prefetched decode 0x0-0x0 pcib4: Subtractively decoded bridge. pci4: <ACPI PCI bus> on pcib4 pci4: physical bus=4 found-> vendor=0x1102, dev=0x0002, revid=0x06 bus=4, slot=2, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=3 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000c880, size 5, enabled pcib4: requested I/O range 0xc880-0xc89f: in range pcib4: matched entry for 4.2.INTA pcib4: slot 2 INTA hardwired to IRQ 23 found-> vendor=0x1102, dev=0x7002, revid=0x06 bus=4, slot=2, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000cc00, size 3, enabled pcib4: requested I/O range 0xcc00-0xcc07: in range pcm0: <Creative EMU10K1> port 0xc880-0xc89f irq 23 at device 2.0 on pci4 pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc880 emu: setmap (a23000, 800), nseg=1, error=0 emu: setmap (a02000, 1000), nseg=1, error=0 pcm0: <TriTech TR28602 AC97 Codec (id = 0x54524123)> pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement pcm0: ac97 codec dac ready count: 0 pcm0: [MPSAFE] emu: setmap (a0a000, 1000), nseg=1, error=0 emu: setmap (98c000, 1000), nseg=1, error=0 emu: setmap (a2a000, 1000), nseg=1, error=0 emu: setmap (a08000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap a05000, 1000; 0xffffff0000a05000 -> a05000 pcm0: sndbuf_setmap a43000, 1000; 0xffffff0000a43000 -> a43000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe41f mem 0xfebff800-0xfebfffff irq 19 at device 31.2 on pci0 atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400 atapci0: [MPSAFE] atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xfebff800 atapci0: AHCI Version 01.10 controller with 4 ports detected ata2: <ATA channel 0> on atapci0 ata2: SATA connect ready time=0ms ata2: sata_connect devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: <ATA channel 1> on atapci0 ata3: SATA connect ready time=0ms ata3: sata_connect devices=0x1<ATA_MASTER> ata3: [MPSAFE] ata4: <ATA channel 2> on atapci0 ata4: SATA connect status=00000000 ata4: [MPSAFE] ata5: <ATA channel 3> on atapci0 ata5: SATA connect status=00000000 ata5: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54 sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 ppc0 failed to probe at irq 7 on isa0 fb: new array size 4 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices uhub7: Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev 1.10/4.10, addr 2 uhub7: 3 ports with 2 removable, bus powered ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3, iclass 3/1 ums0: 3 buttons and Z dir. ukbd0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 4, iclass 3/1 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 uhid0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10, addr 4, iclass 3/1 Device configuration finished. lapic: Divisor 2, Frequency 133023632 hz Timecounter "TSC" frequency 2128382272 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad0: 286168MB <WDC WD3000JS-00PDB0 21.00M21> at ata2-master SATA300 ad0: 586072368 sectors [581421C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad1: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata3-master SATA300 ad1: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 17 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 GEOM: new disk ad1 GEOM_MIRROR: Device datadump created (id=2959370996). GEOM_MIRROR: Device datadump: provider ad0s3 detected. GEOM_MIRROR: Device datadump: provider ad1 detected. GEOM_MIRROR: Device datadump: provider ad1 activated. GEOM_MIRROR: Device datadump: provider ad0s3 activated. GEOM_MIRROR: Device datadump: provider mirror/datadump launched. Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init re0: link state changed to UP ata4: SATA connect status=00000000 ata4: [MPSAFE] --HcccYpVZDxQ8hzPO-- --W2ydbIOJmkm74tJ2 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQFGBSYM52SDGA2eCwURAg09AJ9LLzEk0083mn8lAUlhYrL+FFrTjQCfRHe4 rymrMGvqwCBZcgOCvkDJftk= =g44u -----END PGP SIGNATURE----- --W2ydbIOJmkm74tJ2--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070324132220.GJ6734>