Date: Thu, 13 Mar 2003 18:48:00 +0900 (JST) From: moto kawasaki <kawasaki@kawasaki3.org> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/49980: patch to enable ThinkPAD X24 sound device (Intel 82801CA (ICH3)) Message-ID: <20030313.184800.30191150.kawasaki@kawasaki3.org>
index | next in thread | raw e-mail
>Number: 49980
>Category: kern
>Synopsis: patch to enable ThinkPAD X24 sound device (Intel 82801CA (ICH3))
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Mar 13 01:50:13 PST 2003
>Closed-Date:
>Last-Modified:
>Originator: moto kawasaki <kawasaki@kawasaki3.org>
>Release: FreeBSD 4.8-RC i386
>Organization:
n/a
>Environment:
Machine: IBM ThinkPAD X24 (2662-L3J)
PIII-M 1.13GHz(512KB), 1024MB RAM, 30.0GB HDD,
12.1 XGA(1024x768) TFT LCD, 802.11b wireless(MPCI),
Ethernet(CDC), Modem(MPCI), IBM Secure Chip, USB-FDD,
IEEE 1394, 6Cell Li-Ion battery, WinXP Pro
System: FreeBSD x24.local 4.8-RC FreeBSD 4.8-RC #2:
Thu Mar 6 15:30:58 JST 2003 kawasaki@x24.local:/usr/obj/usr/src/sys/X24
i386
Target: sound device on Intel 82891CA ICH3.
>Description:
Please find attached patch which enable sound device (pcm) on IBM ThinkPAD X24.
Following instructions below (unfortunately in Japanese) and modifying
them as matching codes in 4.7-stable through 4.8-RC, I am enjoying music now.
[bsd-nomads: 15930]
http://www.clave.gr.jp/ml/bsd-nomads/200109/msg00028.html
[bsd-nomads: 16348]
http://www.clave.gr.jp/ml/bsd-nomads/200206/msg00023.html
>How-To-Repeat:
Install 4.8-RC onto X24, then kernel cannot detect this device.
>Fix:
please find attached patch below.
--- dmesg.boot begins here ---
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RC #2: Thu Mar 6 15:30:58 JST 2003
kawasaki@x24.local:/usr/obj/usr/src/sys/X24
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1133MHz (1129.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 670498816 (654784K bytes)
avail memory = 647806976 (632624K bytes)
Preloaded elf kernel "kernel" at 0xc03c3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 14 entries at 0xc00fdeb0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82830M/MP Host-AGP bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <Intel 82801BAM/CAM Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 3.0 on pci2
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 3.1 on pci2
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci2: <unknown card> (vendor=0x1180, dev=0x0552) at 3.2 irq 11
wi0: <Intersil Prism2.5> mem 0xf0000000-0xf0000fff irq 11 at device 5.0 on pci2
wi0: 802.11 address: 00:20:e0:8d:1d:39
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary 1.01.00, Station 1.04.02
fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:d0:59:ca:8f:03
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <Intel 82801CA/CAM (ICH3) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on pci0
pcm0: <unknown ac97 codec> (id=0x43525936)
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
isa0: too many memory ranges
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xdc000-0xdffff,0xe0000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0c01> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0c02> can't assign resources
unknown: <PNP0680> can't assign resources
unknown: <IBM3780> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <IBM0071> can't assign resources
unknown: <PNP0700> can't assign resources
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
ad0: 28615MB <IC25N030ATCS04-0> [62016/15/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s2a
--- dmesg.boot ends here ---
--- ThinkPAD-X24-sound-FreeBSD4.7STABLE.diff begins here ---
Modified patch on FreeBSD 4.7-STABLE.
--- sys/pci/pci.c.orig Thu Oct 17 16:04:10 2002
+++ sys/pci/pci.c Thu Oct 17 16:04:46 2002
@@ -1323,6 +1323,7 @@
* peripherals respond oddly to having these bits
* enabled. Leave them alone by default.
*/
+#define PCI_ENABLE_IO_MODES
#ifdef PCI_ENABLE_IO_MODES
if (type == SYS_RES_IOPORT && !pci_porten(cfg)) {
cfg->cmdreg |= PCIM_CMD_PORTEN;
--- sys/pci/pcisupport.c.orig Thu Oct 17 16:05:21 2002
+++ sys/pci/pcisupport.c Thu Oct 17 16:06:50 2002
@@ -694,6 +694,11 @@
return ("Intel 82801BA/BAM (ICH2) Hub to PCI bridge");
case 0x1a318086:
return ("Intel 82845 PCI-PCI (AGP) bridge");
+ case 0x35768086:
+ return ("Intel 82830M/MP Host-AGP bridge");
+ case 0x24488086:
+ return ("Intel 82801BAM/CAM Hub to PCI bridge");
+
/* VLSI -- vendor 0x1004 */
case 0x01021004:
@@ -905,6 +910,9 @@
return ("Intel 82801AB (ICH0) PCI to LPC bridge");
case 0x24408086:
return ("Intel 82801BA/BAM (ICH2) PCI to LPC bridge");
+ case 0x248c8086:
+ return ("Intel 82801CA/CAM (ICH3) PCI to LPC bridge");
+
/* VLSI -- vendor 0x1004 */
case 0x00061004:
--- ThinkPAD-X24-sound-FreeBSD4.7STABLE.diff ends here ---
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030313.184800.30191150.kawasaki>