From owner-freebsd-hardware Tue Sep 10 05:37:05 1996 Return-Path: owner-hardware Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id FAA12980 for hardware-outgoing; Tue, 10 Sep 1996 05:37:05 -0700 (PDT) Received: from lassie.eunet.fi (lassie.eunet.fi [192.26.119.7]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id FAA12972 for ; Tue, 10 Sep 1996 05:37:00 -0700 (PDT) Received: from key.hole.fi by lassie.eunet.fi with SMTP id AA20373 (5.67a/IDA-1.5 for ); Tue, 10 Sep 1996 15:37:02 +0300 Received: (from count@localhost) by key.hole.fi (8.7.5/8.6.12) id PAA23544; Tue, 10 Sep 1996 15:36:50 +0300 (EET DST) From: "Bror 'Count' Heinola" Message-Id: <199609101236.PAA23544@key.hole.fi> Subject: Re: Allied-Telesis AT1700 (Which Device Driver Is Used?) In-Reply-To: <3.0b15.32.19960909164843.00677820@postoffice3.mail.cornell.edu> from Kim Yong at "Sep 9, 96 04:48:53 pm" To: ky36@cornell.edu (Kim Yong) Date: Tue, 10 Sep 1996 15:36:49 +0300 (EET DST) Cc: kai@nether.net, freebsd-hardware@freebsd.org X-Mailer: ELM [version 2.4ME+ PL25 (25)] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-hardware@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Kim Yong taisi sanoa: > i have an Allied-Telesis AT1700 Ethernet Card, i was wondering > which driver i should use...its supported by FreeBSD, Thats what i read > from the DOCS.. fe0 driver is what you should use, and it works quite nicely. fe0 at 0x300-0x31f irq 15 on isa fe0: address 00:00:f4:d4:02:6f, type AT1700/RE2000 This is what I have in my kernel config file: device fe0 at isa? port 0x300 net irq ? vector feintr > Send Reply to kai@nether.net -- Bror 'Count' Heinola % count@key.hole.fi % http://pobox.com/~count/ Isokaari 27 A 2 % IRC: Count NIC: BH271 % FI-00200 HELSINKI % Work: bror@sms.fi % Roads? Where we're going, Cell: +358-40-5533-554 % Santa Monica Software % we don't need roads.