Date: Wed, 14 Nov 2018 07:36:02 +0900 (JST) From: Mori Hiroki <yamori813@yahoo.co.jp> To: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: BCM/mips still hang up Message-ID: <952422.39638.qm@web103909.mail.ssk.yahoo.co.jp> In-Reply-To: <386566.36409.qm@web103917.mail.ssk.yahoo.co.jp> References: <376089.55679.qm@web103915.mail.ssk.yahoo.co.jp> <386566.36409.qm@web103917.mail.ssk.yahoo.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi=0A=0A=0ABCM5357(bcma) can boot and login.=0A=0A=0Ahttps://dmesgd.nycbug.= org/index.cgi?do=3Dview&id=3D4578=0A=0ABut this have no network interface..= .=0A=0AHiroki Moiri=0A=0A=0A=0A----- Original Message -----=0A> From: Mori = Hiroki <yamori813@yahoo.co.jp>=0A> To: "freebsd-mips@freebsd.org" <freebsd-= mips@freebsd.org>=0A> Cc: =0A> Date: 2018/11/14, Wed 07:01=0A> Subject: Re:= BCM/mips still hang up=0A> =0A> Hi.=0A> =0A> I found may be same problem c= ns11xx(arm) before.=0A> =0A> I think this problem cuase of uart and interru= pt.=0A> =0A> Old Rays code work on fine on BCM/mips. But same=0A> time that= have same hang up problem. I doubt=0A> merge INTERNG in system.=0A> =0A> T= hanks=0A> =0A> Hiroki Mori=0A> =0A> ----- Original Message -----=0A>> From= : Mori Hiroki <yamori813@yahoo.co.jp>=0A>> To: "freebsd-mips@freebsd.org" = <freebsd-mips@freebsd.org>=0A>> Cc: =0A>> Date: 2018/11/12, Mon 14:26=0A>= > Subject: BCM/mips still hang up=0A>> =0A>> Hi=0A>> =0A>> I try to=A012= .0-BETA4 on BCM5351 & BCM5352. It sill hang up on boot.=0A>> This log.=0A>= > =0A>> entry: mips_init()=0A>> Cache info:=0A>> =A0 picache_stride=A0 = =A0 =3D 4096=0A>> =A0 picache_loopcount =3D 4=0A>> =A0 pdcache_stride=A0 = =A0 =3D 4096=0A>> =A0 pdcache_loopcount =3D 2=0A>> =A0 max line size =A0 = =A0 =3D 16=0A>> cpu0: Broadcom processor v8.144=0A>> =A0 MMU: Standard TL= B, 32 entries (1K 4K 16K 64K 256K 1M 16M 64M 256M pg =0A> sizes)=0A>> =A0 = L1 i-cache: 2 ways of 512 sets, 16 bytes per line=0A>> =A0 L1 d-cache: 2 w= ays of 256 sets, 16 bytes per line=0A>> =A0 L2 cache: disabled=0A>> =A0 C= onfig1=3D0x3ed94c82<EJTAG>=0A>> ---<<BOOT>>---=0A>> KDB: debugger backend= s: ddb=0A>> KDB: current backend: ddb=0A>> Copyright (c) 1992-2018 The Fr= eeBSD Project.=0A>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991= , 1992, 1993, 1994=0A>> The Regents of the University of California. All r= ights reserved.=0A>> FreeBSD is a registered trademark of The FreeBSD Foun= dation.=0A>> FreeBSD 12.0-BETA4 e78279655eb(stable/12) Buffalo_WHR-HP-G54 = mips=0A>> gcc version 4.2.1 20070831 patched [FreeBSD]=0A>> real memory= =A0 =3D 16109568 (15732K bytes)=0A>> avail memory =3D 11276288 (10MB)=0A>>= arc4random: no preloaded entropy cache=0A>> random: entropy device exter= nal interface=0A>> nexus0: <MIPS32 root nexus>=0A>> bhnd_nvram0: <Broadco= m> on nexus0=0A>> bhnd0: <BCM5352 SIBA bus> at mem 0x18000000-0x180fffff o= n nexus0=0A>> bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 14> me= m =0A>> =0A> 0x18000000-0x18000dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dfff= fff,0x1a000000-0x1bffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff =0A> = =0A>> irq 8 at core 0 on bhnd0=0A>> gpio0: <Broadcom ChipCommon GPIO> mem= 0x18000000-0x18000dff on =0A> bhnd_chipc0=0A>> gpiobus0: <GPIO bus> on gp= io0=0A>> cpupic0: <MIPS32 Interrupt Controller> on nexus0=0A>> bcm_mips0:= <Broadcom BMIPS33 CPU, rev 6> mem =0A>> 0x18002000-0x18002dff,0x18002f00-= 0x18002fff,0x18002e00-0x18002eff irq 10 at =0A> core =0A>> 2 on bhnd0=0A>>= bhnd_pwrctl0: <ChipCommon Power Control> on bhnd_chipc0=0A>> clock0: <Ge= neric MIPS32 ticker> on nexus0=0A>> Timecounter "MIPS32" frequency 1000000= 00 Hz quality 800=0A>> Event timer "MIPS32" frequency 100000000 Hz quality= 800=0A>> gpioc0: <GPIO controller> on gpio0=0A>> uart0: <16750 or compat= ible> mem 0x18000300-0x180003ff irq 13 on =0A>> bhnd_chipc0=0A>> uart0: c= onsole (115200,n,8,1)=0A>> uart1: <16750 or compatible> mem 0x18000400-0x1= 80004ff irq 14 on =0A>> bhnd_chipc0=0A>> cfi1: <Broadcom ChipCommon CFI> = mem =0A>> 0x1c000000-0x1dffffff,0x18000040-0x1800004b on bhnd_chipc0=0A>> = cfid0 on cfi1=0A>> bhnd0: <Broadcom Fast Ethernet MAC, rev 9> mem =0A>> = 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 9 at = =0A> core =0A>> 1 (no driver attached)=0A>> bhnd0: <Broadcom USB 1.1 Host= Controller, rev 2> mem =0A>> 0x18003000-0x18003dff,0x18003f00-0x18003fff,= 0x18003e00-0x18003eff irq 11 at =0A> core =0A>> 3 (no driver attached)=0A>= > bhnd0: <Broadcom MEMC SDRAM Controller, rev 1> mem =0A>> =0A> 0x18004000= -0x18004dff,0-0x7ffffff,0x10000000-0x17ffffff,0x80000000-0x9fffffff,0x18004= f00-0x18004fff,0x18004e00-0x18004eff =0A> =0A>> at core 4 (no driver attac= hed)=0A>> bhnd0: <Broadcom 802.11 MAC/PHY/Radio, rev 9> mem =0A>> 0x18005= 000-0x18005dff,0x18005f00-0x18005fff,0x18005e00-0x18005eff irq 12 at =0A> c= ore =0A>> 5 (no driver attached)=0A>> bhnd0: <Broadcom RoboSwitch, rev 2>= mem =0A>> 0x18006000-0x18006dff,0x18006f00-0x18006fff,0x18006e00-0x18006e= ff at core 6 =0A> (no =0A>> driver attached)=0A>> cfi0 at mem 0x1c000000-= 0x1dffffff on nexus0=0A>> nexus_alloc_resource: could not reserve resource= for cfi0=0A>> device_attach: cfi0 attach returned 6=0A>> Timecounters ti= ck every 10.000 msec=0A>> Trying to mount root from cd9660:/dev/map/rootfs= .uzip []...=0A>> Warning: no time-of-day clock registered, system time wil= l not be set =0A> accurately=0A>> kern.coredump:=A0=0A>> ________________= _______________________________=0A>> freebsd-mips@freebsd.org mailing list= =0A>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips=0A>>; To uns= ubscribe, send any mail to =0A>> "freebsd-mips-unsubscribe@freebsd.org"=0A= >> =0A> =0A> _______________________________________________=0A> freebsd-mi= ps@freebsd.org mailing list=0A> https://lists.freebsd.org/mailman/listinfo/= freebsd-mips=0A> To unsubscribe, send any mail to =0A> "freebsd-mips-unsubs= cribe@freebsd.org"=0A>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?952422.39638.qm>