Date: Sun, 23 Dec 2001 17:00:41 +0100 (CET) From: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> To: Alan E <alane@geeksrus.net> Cc: FreeBSD ports list <ports@freebsd.org> Subject: Re: cdrtools still have problems! Message-ID: <20011223164421.Y433-100000@klima.physik.uni-mainz.de> In-Reply-To: <200112221951.fBMJpo077665@wwweasel.geeksrus.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 22 Dec 2001, Alan E wrote:
:>On Saturday 22 December 2001 11:46, you wrote:
:>> Hello.
:>>
:>> Is anybody out here using FreeBSD 4.5-PRERELEASE or 4.4-STABLE
:>> with the recent port of cdrtools 1.10_1?
:>
:>Perhaps you could post the messages, if any, in your system log as a followup
:>to your PR.
:>
:>I have two Plextor SCSI drives, one CDROM and one CDR/RW and have no problems
:>at all with them.
:>
And this is waht I promised to send: the Plextor burner:
root: /usr/data/image: cdrecord -checkdrive dev=1,0,0
Cdrecord 1.10 (i386-unknown-freebsd4.4) Copyright (C) 1995-2001 Jörg Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.5'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-R412C '
Revision : '1.07'
Device seems to be: Generic mmc CD-R.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
root: /usr/data/image: cdrecord -prcap dev=1,0,0
Cdrecord 1.10 (i386-unknown-freebsd4.4) Copyright (C) 1995-2001 Jörg Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.5'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-R412C '
Revision : '1.07'
Device seems to be: Generic mmc CD-R.
Drive capabilities, per page 2A:
Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does not write CD-RW media
Does not read DVD-ROM media
Does not read DVD-R media
Does not write DVD-R media
Does not read DVD-RAM media
Does not write DVD-RAM media
Does support test writing
Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads accurately
Does not support BURN-Proof (Sanyo)
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does return R-W subcode de-interleaved and error-corrected
Does not read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does not support C2 error pointers
Does deliver composite A/V data
Does play audio CDs
Number of volume control levels: 256
Does support individual volume control setting for each channel
Does support independent mute setting for each channel
Does not support digital output on port 1
Does not support digital output on port 2
Loading mechanism type: caddy
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature
Maximum read speed in kB/s: 2117
Current read speed in kB/s: 2117
Maximum write speed in kB/s: 706
Current write speed in kB/s: 706
Buffer size in KB: 2048
And this is the output when trying to burn the same ISO image:
root: /usr/data/image: cdrecord dev=1,0,0 speed=4 src.iso
Cdrecord 1.10 (i386-unknown-freebsd4.5) Copyright (C) 1995-2001 Jörg Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.5'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-R412C '
Revision : '1.07'
Device seems to be: Generic mmc CD-R.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Track 01: Total bytes read/written: 341311488/341311488 (166656 sectors).
And this is the output of
root: /usr/data/image: cdrecord -toc dev=1,0,0
Cdrecord 1.10 (i386-unknown-freebsd4.4) Copyright (C) 1995-2001 Jörg Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.5'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-R412C '
Revision : '1.07'
Device seems to be: Generic mmc CD-R.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
first: 1 last 1
track: 1 lba: 0 ( 0) 00:02:00 adr: 1 control: 4 mode: 1
track:lout lba: 166658 ( 666632) 37:04:08 adr: 1 control: 4 mode: -1
And it is the same as on the TEAC drive.
And this is the dmesg output on this host:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-PRERELEASE #7: Fri Dec 21 16:05:46 CET 2001
root@dorette.physik.uni-mainz.de:/usr/obj/usr/src/sys/DORETTE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 551294685 Hz
CPU: AMD-K6(tm) 3D processor (551.29-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257241088 (251212K bytes)
Preloaded elf kernel "kernel" at 0xc03c9000.
Preloaded elf module "agp.ko" at 0xc03c909c.
netsmb_dev: loaded
K6-family MTRR support enabled (2 registers)
Using $PIR table, 7 entries at 0xc00fdde0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C598 (Apollo MVP3) host to PCI bridge> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 15
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA Apollo ATA controller> at 7.1
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xd800-0xd8ff mem 0xe3102000-0xe3102fff irq 10 at device 18.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xdc00-0xdc3f mem 0xe3000000-0xe30fffff,0xe3100000-0xe3100fff irq 14 at device 19.0 on pci0
fxp0: Ethernet address 00:03:47:4d:ba:65
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc1: <Adaptec 2940 SCSI adapter> port 0xe000-0xe0ff mem 0xe3101000-0xe3101fff irq 5 at device 20.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/255 SCBs
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd7000-0xd77ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0xc on isa0
ppc0: SMC-like chipset (ECP/EPP) in ECP+EPP mode (EPP 1.9)
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
IPsec: Initialized Security Association Processing.
Waiting 3 seconds for SCSI devices to settle
sa0 at ahc1 bus 0 target 5 lun 0
sa0: <HP C1533A 9503> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
Mounting root from ufs:/dev/da0s1a
cd0 at ahc1 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R PX-R412C 1.07> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc1 bus 0 target 1 lun 0
cd1: <MATSHITA CD-ROM CR-504 ST23> Removable CD-ROM SCSI-2 device
cd1: 5.000MB/s transfers (5.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DCAS-32160W S65A> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-39130W S97B> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
link_elf: symbol splash_register undefined
--
MfG
O. Hartmann
ohartman@klima.physik.uni-mainz.de
------------------------------------------------------------------
IT-Administration des Institutes fuer Physik der Atmosphaere (IPA)
------------------------------------------------------------------
Johannes Gutenberg Universitaet Mainz
Becherweg 21
55099 Mainz
Tel: +496131/3924662 (Maschinenraum)
Tel: +496131/3924144 (Buero)
FAX: +496131/3923532
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011223164421.Y433-100000>