From owner-freebsd-scsi Wed Jan 21 15:17:15 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA08297 for freebsd-scsi-outgoing; Wed, 21 Jan 1998 15:17:15 -0800 (PST) (envelope-from owner-freebsd-scsi@FreeBSD.ORG) Received: from narnia.plutotech.com (narnia.plutotech.com [206.168.67.130]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id PAA08291 for ; Wed, 21 Jan 1998 15:17:13 -0800 (PST) (envelope-from gibbs@narnia.plutotech.com) Received: (from gibbs@localhost) by narnia.plutotech.com (8.8.8/8.7.3) id PAA09022; Wed, 21 Jan 1998 15:56:00 -0700 (MST) Date: Wed, 21 Jan 1998 15:56:00 -0700 (MST) From: "Justin T. Gibbs" Message-Id: <199801212256.PAA09022@narnia.plutotech.com> To: emking@lexmark.com cc: scsi@FreeBSD.ORG Subject: Re: Target mode support Newsgroups: pluto.freebsd.scsi In-Reply-To: <199801211829.AA21192@interlock2.lexmark.com> User-Agent: tin/pre-1.4-971204 (UNIX) (FreeBSD/3.0-CURRENT (i386)) Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org > Can anyone point me at any info on target mode support on any of the SCSI > drivers for Free-BSD, if it exists. I found a nugget that indicated some > support for the Adaptec 1542B. I also understand that the CAM interface is > architected to support target mode and that it may eventually be supported > in the new drivers that are being developed. I would kill for a snip if > sample code. The aic7xxx driver available in the snapshots of the new CAM SCSI layer has the beginnings of target mode support in it. It's by no means complete, and, as I've been pulled onto another project for the next 4-6 months, I don't anticipate getting back to it soon. It will be completed later this year though as it is still in my employer's interest to have the aic7xxx driver support target mode. > Matt King All opinions are my own and in > Staff Engineer general are completely different > Lexmark International, Inc. from those around me! > emking @ lexmark.com -- Justin