Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 18 Sep 2009 20:52:14 -0700
From:      Ted Faber <faber@isi.edu>
To:        freebsd-stable@freebsd.org
Subject:   Re: PATA disks/DVD not detected on ATI IXP 700 - cannot boot (dmesg attached)
Message-ID:  <20090919035214.GA12889@zod.isi.edu>
In-Reply-To: <20090916161327.GB87631@zod.isi.edu>
References:  <20090916161327.GB87631@zod.isi.edu>

next in thread | previous in thread | raw e-mail | index | archive | help

--kXdP64Ggrk/fb43R
Content-Type: multipart/mixed; boundary="u3/rZRmxL6MmkK24"
Content-Disposition: inline


--u3/rZRmxL6MmkK24
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Wed, Sep 16, 2009 at 09:13:27AM -0700, Ted Faber wrote:
> Hi.
>=20
> I'm trying to upgrade a machine to a new motherboard (the ECS
> A790GXM-AD3 AM3 790GX) my FreeBSD 7-STABLE system (GENERIC kernel,
> compiled from source on 10 Sept 2009) reaches the point where it's going
> to mount the root file system and can't find the disk.  It drops me into
> the manual specification of root file system menu, but there are no
> GEOM-managed disks to choose from. =20
[...]

I managed to boot FreeBSD on this motherboard using a USB key.  Attached
is the dmesg from a verbose boot.  Any help would be appreciated.

--=20
Ted Faber
http://www.isi.edu/~faber           PGP: http://www.isi.edu/~faber/pubkeys.=
asc
Unexpected attachment on this mail? See http://www.isi.edu/~faber/FAQ.html#=
SIG

--u3/rZRmxL6MmkK24
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"
Content-Transfer-Encoding: quoted-printable

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-STABLE #6: Thu Sep 17 17:01:48 PDT 2009
    root@ylum.lunabase.org:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e85000.
Preloaded elf module "/boot/kernel/geom_label.ko" at 0xc0e851a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e85258.
module_register: module g_label already exists!
Module g_label failed to register: 17
Calibrating clock(s) ... i8254 clock: 1193240 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3000128259 Hz
CPU: AMD Athlon(tm) II X2 250 Processor (3000.13-MHz 686-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0x100f62  Stepping =3D 2
  Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=3D0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=3D0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+=
,3DNow!>
  AMD Features2=3D0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OS=
VW,IBS,SKINIT,WDT>
  TSC: P-state invariant
  Cores per package: 2
Data TLB: 48 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associat=
ive
L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associati=
ve
real memory  =3D 3489333248 (3327 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x00000000cc4cdfff, 3410661376 bytes (832681 pages)
avail memory =3D 3409977344 (3252 MB)
Table 'FACP' at 0xcffb0200
Table 'APIC' at 0xcffb0390
MADT: Found table at 0xcffb0390
MP Configuration Table version 1.1 found at 0xc00fc2b0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
ACPI APIC Table: <051909 APIC2009>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry =3D 0xf0010 (c00f0010)  Rev =3D 0  Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f4ea0
pnpbios: Entry =3D f0000:664a  Rev =3D 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf9580/0x0014 (v  0 ACPIAM)
ACPI: RSDT @ 0x0xcffb0000/0x003C (v  1 051909 RSDT2009 0x20090519 MSFT 0x00=
000097)
ACPI: FACP @ 0x0xcffb0200/0x0084 (v  1 051909 FACP2009 0x20090519 MSFT 0x00=
000097)
ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero addre=
ss or length:        0       0/1 [20070320]
ACPI: DSDT @ 0x0xcffb0440/0xA5C4 (v  1  1AAAA 1AAAA000 0x00000000 INTL 0x20=
051117)
ACPI: FACS @ 0x0xcffbe000/0x0040
ACPI: APIC @ 0x0xcffb0390/0x006C (v  1 051909 APIC2009 0x20090519 MSFT 0x00=
000097)
ACPI: MCFG @ 0x0xcffb0400/0x003C (v  1 051909 OEMMCFG  0x20090519 MSFT 0x00=
000097)
ACPI: OEMB @ 0x0xcffbe040/0x0072 (v  1 051909 OEMB2009 0x20090519 MSFT 0x00=
000097)
ACPI: HPET @ 0x0xcffbaa10/0x0038 (v  1 051909 OEMHPET  0x20090519 MSFT 0x00=
000097)
ACPI: SSDT @ 0x0xcffbaa50/0x0458 (v  1 A M I  POWERNOW 0x00000001 AMD  0x00=
000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Sep 17 2009 17:01:=
32)
npx0: INT 16 interface
acpi0: <051909 RSDT2009> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc672f000 pa 0x1000
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000a064
pci_open(1a):	mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=3D060000] [hdr=3D00] is there (id=3D96001022)
pcibios: BIOS version 3.00
AcpiOsDerivePciId: \\_SB_.PCI0.RS78.NB2_ -> bus 0 dev 0 func 0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  4 7 10 11 12 14 15
  Validation          0    7   N     0  4 7 10 11 12 14 15
  After Disable       0  255   N     0  4 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  4 7 10 11 12 14 15
  Validation          0   10   N     0  4 7 10 11 12 14 15
  After Disable       0  255   N     0  4 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  4 7 10 11 12 14 15
  Validation          0   10   N     0  4 7 10 11 12 14 15
  After Disable       0  255   N     0  4 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  4 7 10 11 12 14 15
  Validation          0   11   N     0  4 7 10 11 12 14 15
  After Disable       0  255   N     0  4 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 10 11 12 14 15
  Validation          0  255   N     0  4 10 11 12 14 15
  After Disable       0  255   N     0  4 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 10 11 12 14 15
  Validation          0  255   N     0  4 10 11 12 14 15
  After Disable       0  255   N     0  4 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    4   N     0  4 10 11 12 14 15
  Validation          0    4   N     0  4 10 11 12 14 15
  After Disable       0  255   N     0  4 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  4 10 11 12 14 15
  Validation          0  255   N     0  4 10 11 12 14 15
  After Disable       0  255   N     0  4 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp=
i0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=3D0, physical bus=3D0
found->	vendor=3D0x1022, dev=3D0x9600, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D0, func=3D0
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x2230, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1022, dev=3D0x9602, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D1, func=3D0
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
	cmdreg=3D0x0107, statreg=3D0x0230, cachelnsz=3D0 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x1a (6500 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1022, dev=3D0x9606, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D6, func=3D0
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
	cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D10
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
found->	vendor=3D0x1022, dev=3D0x9607, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D7, func=3D0
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
	cmdreg=3D0x0104, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 19
found->	vendor=3D0x1002, dev=3D0x4390, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D17, func=3D0
	class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0107, statreg=3D0x0230, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D4
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xc000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xb000, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xa000, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x9000, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x8000, size  4, enabled
	map[24]: type Memory, range 32, base 0xfe8ffc00, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 22
found->	vendor=3D0x1002, dev=3D0x4397, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D18, func=3D0
	class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D7
	map[10]: type Memory, range 32, base 0xfe8fe000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found->	vendor=3D0x1002, dev=3D0x4398, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D18, func=3D1
	class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0117, statreg=3D0x02a0, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D7
	map[10]: type Memory, range 32, base 0xfe8fd000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found->	vendor=3D0x1002, dev=3D0x4396, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D18, func=3D2
	class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0102, statreg=3D0x02b0, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe8ff800, size  8, enabled
pcib0: matched entry for 0.18.INTB
pcib0: slot 18 INTB hardwired to IRQ 17
found->	vendor=3D0x1002, dev=3D0x4397, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D19, func=3D0
	class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D10
	map[10]: type Memory, range 32, base 0xfe8fc000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found->	vendor=3D0x1002, dev=3D0x4398, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D19, func=3D1
	class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0117, statreg=3D0x02a0, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D10
	map[10]: type Memory, range 32, base 0xfe8fb000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found->	vendor=3D0x1002, dev=3D0x4396, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D19, func=3D2
	class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0102, statreg=3D0x02b0, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe8ff400, size  8, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 19
found->	vendor=3D0x1002, dev=3D0x4385, revid=3D0x3a
	domain=3D0, bus=3D0, slot=3D20, func=3D0
	class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0403, statreg=3D0xd230, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1002, dev=3D0x439c, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D20, func=3D1
	class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D255
	MSI supports 2 messages
	map[20]: type I/O Port, range 32, base 0xff00, size  4, enabled
found->	vendor=3D0x1002, dev=3D0x4383, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D20, func=3D2
	class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0410, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D7
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xfe8f4000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=3D0x1002, dev=3D0x439d, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D20, func=3D3
	class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x000f, statreg=3D0x0220, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1002, dev=3D0x4384, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D20, func=3D4
	class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1
	cmdreg=3D0x0105, statreg=3D0x02a0, cachelnsz=3D0 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1002, dev=3D0x4399, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D20, func=3D5
	class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dc, irq=3D10
	map[10]: type Memory, range 32, base 0xfe8fa000, size 12, enabled
pcib0: matched entry for 0.20.INTC
pcib0: slot 20 INTC hardwired to IRQ 18
found->	vendor=3D0x1022, dev=3D0x1200, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D24, func=3D0
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1022, dev=3D0x1201, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D24, func=3D1
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1022, dev=3D0x1202, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D24, func=3D2
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1022, dev=3D0x1203, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D24, func=3D3
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1022, dev=3D0x1204, revid=3D0x00
	domain=3D0, bus=3D0, slot=3D24, func=3D4
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xd000-0xdfff
pcib1:   memory decode     0xfe900000-0xfeafffff
pcib1:   prefetched decode 0xd0000000-0xdfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=3D0, physical bus=3D1
found->	vendor=3D0x1002, dev=3D0x9614, revid=3D0x00
	domain=3D0, bus=3D1, slot=3D5, func=3D0
	class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0107, statreg=3D0x4010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena=
bled
pcib1: requested memory range 0xd0000000-0xdfffffff: good
	map[14]: type I/O Port, range 32, base 0xd000, size  8, enabled
pcib1: requested I/O range 0xd000-0xd0ff: in range
	map[18]: type Memory, range 32, base 0xfeaf0000, size 16, enabled
pcib1: requested memory range 0xfeaf0000-0xfeafffff: good
	map[24]: type Memory, range 32, base 0xfe900000, size 20, enabled
pcib1: requested memory range 0xfe900000-0xfe9fffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdffff=
fff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xe000-0xefff
pcib2:   memory decode     0xfeb00000-0xfebfffff
pcib2:   prefetched decode 0xfdf00000-0xfdffffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE6 - AE_=
NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: domain=3D0, physical bus=3D2
found->	vendor=3D0x10ec, dev=3D0x8168, revid=3D0x02
	domain=3D0, bus=3D2, slot=3D0, func=3D0
	class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D10
	powerspec 3  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	MSI-X supports 2 messages in map 0x20
	map[10]: type I/O Port, range 32, base 0xe800, size  8, enabled
pcib2: requested I/O range 0xe800-0xe8ff: in range
	map[18]: type Memory, range 64, base 0xfebff000, size 12, enabled
pcib2: requested memory range 0xfebff000-0xfebfffff: good
	map[20]: type Prefetchable Memory, range 64, base 0xfdff0000, size 16, ena=
bled
pcib2: requested memory range 0xfdff0000-0xfdffffff: good
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
pcib2: slot 0 INTA is routed to irq 18
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111D=
P PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff,0xfdf=
f0000-0xfdffffff irq 18 at device 0.0 on pci2
re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfebff000
re0: MSI count : 1
re0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 49
re0: using IRQ 256 for MSI
re0: Using 1 MSI messages
re0: Chip rev. 0x3c000000
re0: MAC rev. 0x00400000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba=
seT-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:25:11:41:af:03
re0: [MPSAFE]
re0: [FILTER]
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x0-0x0
pcib3:   no prefetched decode
pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE7 - AE_=
NOT_FOUND
pci3: <ACPI PCI bus> on pcib3
pci3: domain=3D0, physical bus=3D3
atapci0: <ATI IXP700 SATA300 controller> port 0xc000-0xc007,0xb000-0xb003,0=
xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ffc00-0xfe8fffff irq 22 a=
t device 17.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8000
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe8ffc00
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect status=3D00000000
ata2: ahci_reset devices=3D0x0
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=3D00000000
ata3: ahci_reset devices=3D0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=3D00000000
ata4: ahci_reset devices=3D0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=3D00000000
ata5: ahci_reset devices=3D0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 at =
device 18.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fe000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 16 at =
device 18.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fd000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ff8ff irq 17=
 at device 18.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8ff800
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 at =
device 19.0 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fc000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 3 ports with 3 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 18 at =
device 19.1 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fb000
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci3
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 3 ports with 3 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff400-0xfe8ff4ff irq 19=
 at device 19.2 on pci0
ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8ff400
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
ehci1: Dropped interrupts workaround enabled
usb5: EHCI version 1.0
usb5: companion controllers, 3 ports each: usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 6 ports with 6 removable, self powered
umass0: <Sony Storage Media, class 0/0, rev 2.00/1.00, addr 2> on uhub5
umass0:0:0:-1: Attached to scbus0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177=
,0x376,0xff00-0xff0f at device 20.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: stat1=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata0: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xf000-0xfff
pcib4:   no prefetched decode
pcib4:   Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: domain=3D0, physical bus=3D4
ohci4: <OHCI (generic) USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 at =
device 20.5 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fa000
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb6: OHCI version 1.0, legacy support
usb6: SMM does not respond, resetting
usb6: <OHCI (generic) USB controller> on ohci4
usb6: USB revision 1.0
uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: failed to reset the aux device.
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
cpu1: <ACPI CPU> on acpi0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata1 failed to probe at port 0x170 irq 15 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 214565 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100004285 hz
Timecounter "TSC" frequency 3000128259 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
The GEOM class LABEL is already loaded.
(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <Sony Storage Media 0100> Removable Direct Access SCSI-0 device=20
pass0: 40.000MB/s transfers
GEOM: new disk da0
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 0
msi: Assigning MSI IRQ 256 to local APIC 1
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Storage Media 0100> Removable Direct Access SCSI-0 device=20
da0: 40.000MB/s transfers
da0: 960MB (1966080 512 byte sectors: 64H 32S/T 960C)
Trying to mount root from ufs:/dev/ufs/FreeBSDonUSB
start_init: trying /sbin/init
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x5a
acpi: bad write to port 0x000 (8), val 0x7
acpi: bad write to port 0x001 (8), val 0x7
acpi: bad write to port 0x000 (8), val 0x30
acpi: bad read from port 0x001 (8)
acpi: bad read from port 0x000 (8)
acpi: bad write to port 0x000 (8), val 0xa5

--u3/rZRmxL6MmkK24--

--kXdP64Ggrk/fb43R
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.13 (FreeBSD)

iEYEARECAAYFAkq0VW4ACgkQaUz3f+Zf+Xs0EQCg7GpT4ETWYHAXXD0hOuIPgx/k
wBIAoPQvEzjQGEmFlWoXd9wfqEH+eh+F
=MIoj
-----END PGP SIGNATURE-----

--kXdP64Ggrk/fb43R--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090919035214.GA12889>