Date: Fri, 18 Sep 2009 20:52:14 -0700 From: Ted Faber <faber@isi.edu> To: freebsd-stable@freebsd.org Subject: Re: PATA disks/DVD not detected on ATI IXP 700 - cannot boot (dmesg attached) Message-ID: <20090919035214.GA12889@zod.isi.edu> In-Reply-To: <20090916161327.GB87631@zod.isi.edu> References: <20090916161327.GB87631@zod.isi.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
--kXdP64Ggrk/fb43R Content-Type: multipart/mixed; boundary="u3/rZRmxL6MmkK24" Content-Disposition: inline --u3/rZRmxL6MmkK24 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Wed, Sep 16, 2009 at 09:13:27AM -0700, Ted Faber wrote: > Hi. >=20 > I'm trying to upgrade a machine to a new motherboard (the ECS > A790GXM-AD3 AM3 790GX) my FreeBSD 7-STABLE system (GENERIC kernel, > compiled from source on 10 Sept 2009) reaches the point where it's going > to mount the root file system and can't find the disk. It drops me into > the manual specification of root file system menu, but there are no > GEOM-managed disks to choose from. =20 [...] I managed to boot FreeBSD on this motherboard using a USB key. Attached is the dmesg from a verbose boot. Any help would be appreciated. --=20 Ted Faber http://www.isi.edu/~faber PGP: http://www.isi.edu/~faber/pubkeys.= asc Unexpected attachment on this mail? See http://www.isi.edu/~faber/FAQ.html#= SIG --u3/rZRmxL6MmkK24 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-STABLE #6: Thu Sep 17 17:01:48 PDT 2009 root@ylum.lunabase.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e85000. Preloaded elf module "/boot/kernel/geom_label.ko" at 0xc0e851a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e85258. module_register: module g_label already exists! Module g_label failed to register: 17 Calibrating clock(s) ... i8254 clock: 1193240 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3000128259 Hz CPU: AMD Athlon(tm) II X2 250 Processor (3000.13-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x100f62 Stepping =3D 2 Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=3D0x802009<SSE3,MON,CX16,POPCNT> AMD Features=3D0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+= ,3DNow!> AMD Features2=3D0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OS= VW,IBS,SKINIT,WDT> TSC: P-state invariant Cores per package: 2 Data TLB: 48 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associat= ive L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associati= ve real memory =3D 3489333248 (3327 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x00000000cc4cdfff, 3410661376 bytes (832681 pages) avail memory =3D 3409977344 (3252 MB) Table 'FACP' at 0xcffb0200 Table 'APIC' at 0xcffb0390 MADT: Found table at 0xcffb0390 MP Configuration Table version 1.1 found at 0xc00fc2b0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled ACPI APIC Table: <051909 APIC2009> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry =3D 0xf0010 (c00f0010) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f4ea0 pnpbios: Entry =3D f0000:664a Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ULE: setup cpu group 1 ULE: setup cpu 1 ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 ACPI: RSDP @ 0x0xf9580/0x0014 (v 0 ACPIAM) ACPI: RSDT @ 0x0xcffb0000/0x003C (v 1 051909 RSDT2009 0x20090519 MSFT 0x00= 000097) ACPI: FACP @ 0x0xcffb0200/0x0084 (v 1 051909 FACP2009 0x20090519 MSFT 0x00= 000097) ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero addre= ss or length: 0 0/1 [20070320] ACPI: DSDT @ 0x0xcffb0440/0xA5C4 (v 1 1AAAA 1AAAA000 0x00000000 INTL 0x20= 051117) ACPI: FACS @ 0x0xcffbe000/0x0040 ACPI: APIC @ 0x0xcffb0390/0x006C (v 1 051909 APIC2009 0x20090519 MSFT 0x00= 000097) ACPI: MCFG @ 0x0xcffb0400/0x003C (v 1 051909 OEMMCFG 0x20090519 MSFT 0x00= 000097) ACPI: OEMB @ 0x0xcffbe040/0x0072 (v 1 051909 OEMB2009 0x20090519 MSFT 0x00= 000097) ACPI: HPET @ 0x0xcffbaa10/0x0038 (v 1 051909 OEMHPET 0x20090519 MSFT 0x00= 000097) ACPI: SSDT @ 0x0xcffbaa50/0x0458 (v 1 A M I POWERNOW 0x00000001 AMD 0x00= 000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400 wlan_amrr: <AMRR Transmit Rate Control Algorithm> wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Sep 17 2009 17:01:= 32) npx0: INT 16 interface acpi0: <051909 RSDT2009> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc672f000 pa 0x1000 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a064 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D96001022) pcibios: BIOS version 3.00 AcpiOsDerivePciId: \\_SB_.PCI0.RS78.NB2_ -> bus 0 dev 0 func 0 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed ACPI HPET table warning: Sequence is non-zero (2) ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 4 7 10 11 12 14 15 Validation 0 7 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 7 10 11 12 14 15 Validation 0 11 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 10 11 12 14 15 Validation 0 255 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 10 11 12 14 15 Validation 0 255 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 10 11 12 14 15 Validation 0 4 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 10 11 12 14 15 Validation 0 255 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp= i0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x1022, dev=3D0x9600, revid=3D0x00 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2230, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x9602, revid=3D0x00 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x1a (6500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x9606, revid=3D0x00 domain=3D0, bus=3D0, slot=3D6, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 18 found-> vendor=3D0x1022, dev=3D0x9607, revid=3D0x00 domain=3D0, bus=3D0, slot=3D7, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0104, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 19 found-> vendor=3D0x1002, dev=3D0x4390, revid=3D0x00 domain=3D0, bus=3D0, slot=3D17, func=3D0 class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0230, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D4 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled map[14]: type I/O Port, range 32, base 0xb000, size 2, enabled map[18]: type I/O Port, range 32, base 0xa000, size 3, enabled map[1c]: type I/O Port, range 32, base 0x9000, size 2, enabled map[20]: type I/O Port, range 32, base 0x8000, size 4, enabled map[24]: type Memory, range 32, base 0xfe8ffc00, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 22 found-> vendor=3D0x1002, dev=3D0x4397, revid=3D0x00 domain=3D0, bus=3D0, slot=3D18, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 map[10]: type Memory, range 32, base 0xfe8fe000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x4398, revid=3D0x00 domain=3D0, bus=3D0, slot=3D18, func=3D1 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 map[10]: type Memory, range 32, base 0xfe8fd000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x4396, revid=3D0x00 domain=3D0, bus=3D0, slot=3D18, func=3D2 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0102, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe8ff800, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 found-> vendor=3D0x1002, dev=3D0x4397, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[10]: type Memory, range 32, base 0xfe8fc000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x4398, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D1 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[10]: type Memory, range 32, base 0xfe8fb000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x4396, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D2 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0102, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe8ff400, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 19 found-> vendor=3D0x1002, dev=3D0x4385, revid=3D0x3a domain=3D0, bus=3D0, slot=3D20, func=3D0 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0403, statreg=3D0xd230, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1002, dev=3D0x439c, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 MSI supports 2 messages map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled found-> vendor=3D0x1002, dev=3D0x4383, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D2 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0410, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xfe8f4000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x439d, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D3 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0220, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1002, dev=3D0x4384, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D4 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0105, statreg=3D0x02a0, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1002, dev=3D0x4399, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D5 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D10 map[10]: type Memory, range 32, base 0xfe8fa000, size 12, enabled pcib0: matched entry for 0.20.INTC pcib0: slot 20 INTC hardwired to IRQ 18 found-> vendor=3D0x1022, dev=3D0x1200, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1201, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D1 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1202, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1203, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D3 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1204, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D4 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xfe900000-0xfeafffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x9614, revid=3D0x00 domain=3D0, bus=3D1, slot=3D5, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x4010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena= bled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[14]: type I/O Port, range 32, base 0xd000, size 8, enabled pcib1: requested I/O range 0xd000-0xd0ff: in range map[18]: type Memory, range 32, base 0xfeaf0000, size 16, enabled pcib1: requested memory range 0xfeaf0000-0xfeafffff: good map[24]: type Memory, range 32, base 0xfe900000, size 20, enabled pcib1: requested memory range 0xfe900000-0xfe9fffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xd0000000-0xdffff= fff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xe000-0xefff pcib2: memory decode 0xfeb00000-0xfebfffff pcib2: prefetched decode 0xfdf00000-0xfdffffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE6 - AE_= NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x10ec, dev=3D0x8168, revid=3D0x02 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xe800, size 8, enabled pcib2: requested I/O range 0xe800-0xe8ff: in range map[18]: type Memory, range 64, base 0xfebff000, size 12, enabled pcib2: requested memory range 0xfebff000-0xfebfffff: good map[20]: type Prefetchable Memory, range 64, base 0xfdff0000, size 16, ena= bled pcib2: requested memory range 0xfdff0000-0xfdffffff: good pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 18 pcib2: slot 0 INTA is routed to irq 18 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111D= P PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff,0xfdf= f0000-0xfdffffff irq 18 at device 0.0 on pci2 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfebff000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 49 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba= seT-FDX, auto re0: bpf attached re0: Ethernet address: 00:25:11:41:af:03 re0: [MPSAFE] re0: [FILTER] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE7 - AE_= NOT_FOUND pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 atapci0: <ATI IXP700 SATA300 controller> port 0xc000-0xc007,0xb000-0xb003,0= xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ffc00-0xfe8fffff irq 22 a= t device 17.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8000 atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe8ffc00 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports detected ata2: <ATA channel 0> on atapci0 ata2: SATA connect status=3D00000000 ata2: ahci_reset devices=3D0x0 ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: SATA connect status=3D00000000 ata3: ahci_reset devices=3D0x0 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: SATA connect status=3D00000000 ata4: ahci_reset devices=3D0x0 ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: SATA connect status=3D00000000 ata5: ahci_reset devices=3D0x0 ata5: [MPSAFE] ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 at = device 18.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fe000 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 51 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 16 at = device 18.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fd000 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ff8ff irq 17= at device 18.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8ff800 ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] ehci0: Dropped interrupts workaround enabled usb2: EHCI version 1.0 usb2: companion controllers, 3 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 at = device 19.0 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fc000 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: <OHCI (generic) USB controller> on ohci2 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 3 ports with 3 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 18 at = device 19.1 on pci0 ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fb000 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: <OHCI (generic) USB controller> on ohci3 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 3 ports with 3 removable, self powered ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff400-0xfe8ff4ff irq 19= at device 19.2 on pci0 ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe8ff400 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 54 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] ehci1: Dropped interrupts workaround enabled usb5: EHCI version 1.0 usb5: companion controllers, 3 ports each: usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci1 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 6 ports with 6 removable, self powered umass0: <Sony Storage Media, class 0/0, rev 2.00/1.00, addr 2> on uhub5 umass0:0:0:-1: Attached to scbus0 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0xff00-0xff0f at device 20.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat1=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55 ata0: [MPSAFE] ata0: [ITHREAD] pci0: <multimedia, HDA> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci4: <ACPI PCI bus> on pcib4 pci4: domain=3D0, physical bus=3D4 ohci4: <OHCI (generic) USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 at = device 20.5 on pci0 ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe8fa000 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb6: OHCI version 1.0, legacy support usb6: SMM does not respond, resetting usb6: <OHCI (generic) USB controller> on ohci4 usb6: USB revision 1.0 uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 uhub6: 2 ports with 2 removable, self powered acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: failed to reset the aux device. acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x810 cpu1: <ACPI CPU> on acpi0 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed ex_isa_identify() ata: ata0 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata1 failed to probe at port 0x170 irq 15 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x1 0x1 0x1 0x1 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 214565 -> 100000 procfs registered lapic: Divisor 2, Frequency 100004285 hz Timecounter "TSC" frequency 3000128259 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. The GEOM class LABEL is already loaded. (probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0? pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <Sony Storage Media 0100> Removable Direct Access SCSI-0 device=20 pass0: 40.000MB/s transfers GEOM: new disk da0 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning PCI IRQ 16 to local APIC 0 ioapic0: Assigning PCI IRQ 17 to local APIC 1 ioapic0: Assigning PCI IRQ 18 to local APIC 0 ioapic0: Assigning PCI IRQ 19 to local APIC 1 ioapic0: Assigning PCI IRQ 22 to local APIC 0 msi: Assigning MSI IRQ 256 to local APIC 1 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Sony Storage Media 0100> Removable Direct Access SCSI-0 device=20 da0: 40.000MB/s transfers da0: 960MB (1966080 512 byte sectors: 64H 32S/T 960C) Trying to mount root from ufs:/dev/ufs/FreeBSDonUSB start_init: trying /sbin/init acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x5a acpi: bad write to port 0x000 (8), val 0x7 acpi: bad write to port 0x001 (8), val 0x7 acpi: bad write to port 0x000 (8), val 0x30 acpi: bad read from port 0x001 (8) acpi: bad read from port 0x000 (8) acpi: bad write to port 0x000 (8), val 0xa5 --u3/rZRmxL6MmkK24-- --kXdP64Ggrk/fb43R Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.13 (FreeBSD) iEYEARECAAYFAkq0VW4ACgkQaUz3f+Zf+Xs0EQCg7GpT4ETWYHAXXD0hOuIPgx/k wBIAoPQvEzjQGEmFlWoXd9wfqEH+eh+F =MIoj -----END PGP SIGNATURE----- --kXdP64Ggrk/fb43R--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090919035214.GA12889>