Date: Fri, 11 Apr 1997 13:44:01 -0700 (PDT) From: Christopher Ulbright <ulbright@cs.washington.edu> To: freebsd-smp@freebsd.org Subject: APIC Missing 8254 connection II Message-ID: <Pine.ULT.3.96.970411132955.15587C-100000@wolf.cs.washington.edu>
next in thread | raw e-mail | index | archive | help
I sent this previously with a MIME encoded attachment. Here I've just appended the mptable output for those without MIME decoding capabilities. Sorry for any inconvenience. -chris ulbright ============================================================================ === MPTable, version 2.0.6 looking for EBDA pointer @ 0x040e, found, searching EBDA @ 0x0009fc00 searching CMOS 'top of mem' @ 0x0009f800 (638K) searching default 'top of mem' @ 0x0009fc00 (639K) searching BIOS @ 0x000f0000 MP FPS found in BIOS @ physical addr: 0x000f81d0 ---------------------------------------------------------------------------- --- MP Floating Pointer Structure: location: BIOS physical address: 0x000f81d0 signature: '_MP_' length: 16 bytes signature: '_MP_' length: 16 bytes version: 1.1 checksum: 0x33 mode: Virtual Wire ---------------------------------------------------------------------------- --- MP Config Table Header: physical address: 0x000f81e0 signature: 'PCMP' base table length: 244 version: 1.1 checksum: 0xcb OEM ID: 'INTEL ' Product ID: 'BUCKEYE ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 22 local APIC address: 0xfec08000 extended table length: 0 extended table checksum: 0 extended table length: 0 extended table checksum: 0 ---------------------------------------------------------------------------- --- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 1 9 0xfbff 4 0x11 AP, usable 6 1 9 0xfbff -- Bus: Bus ID Type 0 PCI 1 PCI 18 ISA -- I/O APICs: APIC ID Version State Address 13 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID I NT# ExtINT active-hi edge 18 0 13 0 NT# ExtINT active-hi edge 18 0 13 0 INT active-hi edge 18 1 13 1 INT active-hi edge 18 3 13 3 INT active-hi edge 18 4 13 4 INT active-hi edge 18 5 13 5 INT active-hi edge 18 6 13 6 INT active-hi edge 18 7 13 7 INT active-hi edge 18 8 13 8 INT active-hi edge 18 9 13 9 INT active-lo level 18 10 13 10 INT active-lo level 18 11 13 11 INT active-hi edge 18 12 13 12 INT active-hi edge 18 14 13 14 INT active-hi edge 18 15 13 15 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC IDtINT# ExtINT active-hi edge 18 0 255 0 NMI active-hi edge 0 0:A 255 1 ---------------------------------------------------------------------------- --- # SMP kernel config file options: options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O options NCPU=2 # number of CPUs options NBUS=3 # number of busses options NAPIC=1 # number of IO APICs options NINTR=24 # number of INTs options SMP_INVLTLB # #options SMP_PRIVPAGES # BROKEN, DO NOT use! #options SMP_AUTOSTART # BROKEN, DO NOT use! #options SERIAL_DEBUG # com port debug output ---------------------------------------------------------------------------- --- dmesg output: Copyright (c) 1992-1996 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-970209-SNAP #0: Thu Apr 10 16:32:34 GMT 1997 FreeBSD 3.0-970209-SNAP #0: Thu Apr 10 16:32:34 GMT 1997 root@weft.cs.washington.edu:/usr/src/sys-SMP/compile/SMP Calibrating clock(s) relative to mc146818A clock ... i586 clock: 198660263 Hz, i 8254 clock: 1193156 Hz CPU: Pentium Pro (198.67-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping=9 Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMO V> real memory = 67108864 (65536K bytes) avail memory = 62423040 (60960K bytes) Probing for devices on PCI bus 0: chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0:0 chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:18:0 chip2 <Intel 82371SB IDE interface> rev 0 on pci0:18:1 chip3 <generic PCI bridge (vendor=1011 device=0024 subclass=4)> rev 1 on pci0:20 :0 Probing for devices on PCI bus 1: ahc0 <Adaptec aic7880 Ultra SCSI host adapter> rev 0 int a irq 11 on pci1:5:0 ahc0: Using left over BIOS settings ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0: waiting for scsi devices to settle scbus0 at ahc0 bus 0 sd0 at scbus0 target 0 lun 0 scbus0 at ahc0 bus 0 sd0 at scbus0 target 0 lun 0 sd0: <SEAGATE ST34371W 0280> type 0 fixed SCSI 2 sd0: Direct-Access 4148MB (8496960 512 byte sectors) st0 at scbus0 target 4 lun 0 st0: <ARCHIVE Python 28388-XXX 5.72> type 1 removable SCSI 2 st0: Sequential-Access density code 0x13, drive empty cd0 at scbus0 target 5 lun 0 cd0: <SONY CD-ROM CDU-76S 1.2d> type 5 removable SCSI 2 cd0: CD-ROM cd present [400000 x 2048 byte records] uk0 at scbus0 target 6 lun 0 uk0: <ESG-SHV SCA HSBP M2 0.14> type 3 fixed SCSI 2 uk0: Unknown fxp0 <Intel EtherExpress Pro/100B Fast Ethernet> rev 1 int a irq 10 on pci1:10:0 pci_map_mem failed: device's memrange 0xf98ff000-0xf98fffff is incompatible with its bridge's memrange 0xf9a00000-0xfbefffff fxp0: Ethernet address 00:a0:c9:06:97:00 vga0 <VGA-compatible display device> rev 1 int a irq 11 on pci1:11:0 vga1 <VGA-compatible display device> rev 34 on pci1:15:0 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 ed1 not found at 0x300 ed0 not found at 0x280 ed1 not found at 0x300 fe0 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff mse0 not found at 0x23c psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 aha0 not found at 0x330 aic0 not found at 0x340 ed0 not found at 0x280 ed1 not found at 0x300 fe0 not found at 0x300 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff mse0 not found at 0x23c psm0: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 aha0 not found at 0x330 aic0 not found at 0x340 nca0 not found at 0x1f88 nca1 not found at 0x350 sea0 not found wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ie0 not found at 0x360 ep0 not found at 0x300 ex0 not found at 0xffffffff ix0 not found at 0x300 le0 not found at 0x300 lnc0 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 npx0 on motherboard npx0: INT 16 interface apm0: disabled, not probed. changing root device to sd0a ============================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.ULT.3.96.970411132955.15587C-100000>